Sheet Metal Mechanic

3 weeks ago

Battle Creek, United States Allied Reliability Full time

Overview:

Purpose of Job:

Support production process goods through maintaining and servicing equipment, support process installation, and support process replacement while working well with other Skills Trades under direction of Maintenance group and Engineering group.

Essential Duties and Responsibilities:

The following description of duties and responsibilities are generally inclusive of all duties to be performed by a Sheet Metal Mechanic working under this job description.

  1. Equipment Maintenance Provide the highest level of support possible to production facilities with an intent of achieving superior equipment effectiveness as related to process and process support equipment.
  2. Design & Engineering Support Provide the highest level of support possible to engineering and design resources.
  3. Repair, adjust and maintain equipment (such as guarding pneumatic transfer devices and diverters) that transfers products.
  4. Set up equipment to accommodate various products, package dimensions, production volumes and fabricate changes as needed.
  5. Assist Pipefitters with airveys.
  6. Initiate start up.
  7. Observe line in operation.
  8. Identify trouble areas.
  9. Advise maintenance management of recurrent problems.
  10. Clean and lubricate Sheet Metal shop components to ensure fluid operation.
  11. Observe Company established sanitary and safety rules at all times.
  12. Support the design of equipment in Sheet Metal Trade.
  13. Discuss scope of work with other trades to identify appropriate roles.
  14. Perform the essential functions of the job.
  15. Work with other trades to develop, maintain, and adapt maintenance plans.
  16. Review approved work orders entered into the CMMS.
  17. Enter work orders for identified repairs.
  18. Create, maintain, and adjust preventative maintenance routines.
  19. Provide training to others within the Sheet Metal classification.
  20. Develop positive and productive relationships with all employees.
  21. Drive continuous improvement in all areas of responsibility.
  22. Participate in Root Cause Analysis (RCA) meetings, as required.
  23. Perform all necessary daily inspections of equipment (i.e., safety, etc.).
  24. Implement and document all necessary audits and planned preventative maintenance.
  25. Assist in planning work for equipment outages.
  26. Repair normal equipment breakdowns; i.e. repair/replace guards, diverters, shoots, doors, etc.
  27. Perform rigging and installation of trade-related equipment and assist all trades.
  28. Trouble shoot equipment failures as required.
  29. Other duties as assigned.

Qualifications

Job Qualifications:

  1. Have the ability to perform all duties with a minimum amount of supervision.
  2. Have complete knowledge of production process while performing all duties in compliance with GMP process, plant safety rules, sanitation rules, and working rules.
  3. Have complete knowledge of appropriate application and utilization of personal protective equipment specific to the trade.
  4. Have complete knowledge of appropriate application, utilization and care of equipment and/or tools used in the trade.
  5. Have solid knowledge of, and proficiency in mathematical functions used in the trade.
  6. Use interpersonal skills to interact and work with others across the organization and in cross-functional teams.
  7. Have a strong knowledge of current technology, and desire to expand upon that knowledge as related to mechanical trades.
  8. Willingness to participate in trade related training.
  9. Successful completion of High School education program or equivalent state certification.
  10. Successful Journeyman Sheet Metal Apprenticeship program or > 8000 hours documented in the Sheet Metal trade.
  11. Must be able to pass relevant/required written exam and hands-on training exam related to Sheet Metal trade.
  12. Have an understanding of process and packaging, and its appropriate application.
  13. Have an understanding of Computer Systems operating on a windows platform.
  14. Read drawings, blueprints, and schematics.

Physical Requirements:

The following physical demands are necessary for the Sheet Metal Mechanic to perform daily duties. It would not be practical or feasible to eliminate these requirements.

    • Able to safely climb stairs, scaffolds and ladder steps.
    • Able to safely work from high surfaces.
    • Able to safely utilize proper fall protection equipment.
    • Able to safely lift up to 50 pounds while maintaining balance.
    • Able to safely crawl over and/or under equipment.

#LI-JJ1

  • Electrical and Mechanical Maintenance Specialist

    4 weeks ago

    Battle Creek, Michigan, United States Adient Full time

    Job SummaryAdient is seeking a skilled Maintenance Technician to join its automotive metal seat frame welding plant in Battle Creek, MI. The successful candidate will be responsible for performing preventive, planned, and emergency maintenance in a production environment.Key ResponsibilitiesFixing equipment as needed, changeovers, PMs, and troubleshooting of...

  • Duct Skilled Worker

    1 week ago

    Queen Creek, United States MDMartin Full time

    Job DescriptionJob DescriptionLocation: Meza AZLevel/Salary range: $52,000 - $60,000  Role and Responsibilities We are seeking an experienced Duct Skilled worker with 7+ years’ experience with sheet metal fabrication, design and installation to join our construction team. The ideal candidate will be good at understanding air flow and duct modifications....

  • Maintenance Technician- Electrical/Mechanical

    6 months ago

    Battle Creek, United States Adient Full time

    JOB DESCRIPTION Summary Opportunity for a Maintenance Technician to join Adient's automotive metal seat frame welding plant in Battle Creek, MI. The Maintenance Technician is responsible for performing preventive, planned, and emergency maintenance in a production environment. The shift hours for this third shift role are 9:45pm-6:15am. Essential...

  • Project Manager

    4 weeks ago

    Oak Creek, Wisconsin, United States Grunau Full time

    Project Manager Role at GrunauAs a Project Manager at Grunau, you will be responsible for delivering projects that meet or exceed individual gross margin plans. You will own the relationship with customers, actively seek and develop new business relationships, and lead and participate in proposal generation and presentation. Your technical knowledge of...

  • Mechanical Project Manager

    4 months ago

    Oak Creek, United States Grunau Company Full time

    Grunau's Project Managers differentiate themselves and Grunau through excellent project execution. They own their personal development and create strong relationships with our customers. They sell the majority of their own work. Their skill level allows them to be effective mentors to Project Managers and Assistant Project Managers. Essential Tasks for a...

  • Mechanical Project Manager

    3 weeks ago

    Oak Creek, United States Grunau Full time

    Grunau's Project Managers differentiate themselves and Grunau through excellent project execution. They own their personal development and create strong relationships with our customers. They sell the majority of their own work. Their skill level allows them to be effective mentors to Project Managers and Assistant Project Managers. Essential Tasks for a...

  • Senior Mechanical Design Engineer

    1 month ago

    Old Mill Creek, Illinois, United States Jobot Full time

    Job Title: Senior Mechanical Design EngineerAbout the Role: We are seeking a highly skilled Senior Mechanical Design Engineer to join our team at Jobot. As a Senior Mechanical Design Engineer, you will be responsible for designing and developing mechanical components, from simple mounting brackets to complete enclosures.Responsibilities:* Design and develop...

  • Senior Mechanical Design Engineer

    4 weeks ago

    Old Mill Creek, Illinois, United States Jobot Full time

    Job SummaryWe are seeking a highly skilled Senior Mechanical Design Engineer to join our team at Jobot. As a key member of our engineering team, you will be responsible for designing and developing cutting-edge RF tools. About the RoleThis is an urgent hire for a Senior Mechanical Design Engineer to work on the development of innovative hardware technology....

  • Journeyman Installation

    2 months ago

    Fall Creek, United States CoolSys Full time

    Overview: WHY COOLSYS?At CoolSys, we offer more than just a job—we provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from Pay from $35.00- $50.00/hourSign-on bonus up to $5,000.Paid Drive Time: Enjoy 100% pay for...

  • Journeyman Installation

    4 weeks ago

    Fall Creek, United States CoolSys Full time

    Overview: WHY COOLSYS?At CoolSys, we offer more than just a job—we provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from Pay from $35.00- $50.00/hourSign-on bonus up to $5,000.Paid Drive Time: Enjoy 100% pay for...

  • Mechanical Assembly

    1 month ago

    Pryor Creek, United States Stand-By Personnel Full time

    Mechanical AssemblerPay:$17hr.Hours:MondayFriday 6AM2:30PMJob type:Temp to HireLocation:Pryor OklahomaJob Description:The Mechanical assembler prepares work by studying assembly instructions blueprints specifications and parts lists and gathering necessary parts subassemblies tools and materials. Tasks include assembling metal components subassemblies...

  • Mechanical Assembly

    4 weeks ago

    Pryor Creek, United States Stand-By Personnel Full time

    Mechanical AssemblerPay:$17hr.Hours:MondayFriday 6AM2:30PMJob type:Temp to HireLocation:Pryor OklahomaJob Description:The Mechanical assembler prepares work by studying assembly instructions blueprints specifications and parts lists and gathering necessary parts subassemblies tools and materials. Tasks include assembling metal components subassemblies...

  • Nuclear Machinist Mate Opportunities

    4 weeks ago

    Goose Creek, South Carolina, United States Aerotek Full time

    Nuclear Machinist Mate Job SummaryAs a Nuclear Machinist Mate at Aerotek, you will be responsible for maintaining and repairing industrial equipment, machinery, and facilities. This includes hydraulic systems, gearboxes, conveyor equipment, and other mechanical systems. You will also be responsible for troubleshooting, dismantling, repairing, assembling,...

  • Senior Mechanical Design Engineer

    4 weeks ago

    Walnut Creek, California, United States Burns & McDonnell Full time

    The Senior Mechanical Design Engineer will lead mechanical design project teams to create world-class designs for new projects, alterations, and redevelopments on a variety of projects.Key Responsibilities:Lead mechanical design of projects from the conceptual phase through design completion.Prepare mechanical equipment specifications and data sheets.Review...

  • Machinist Mate/Maintenance Mechanic

    1 month ago

    Goose Creek, United States Aerotek Full time

    Job DescriptionJob DescriptionAre you looking to be a part of a team that treats everyone like family and willing to help everyone out? Do you have Mechanical knowledge working in Heavy Industrial environments from the Navy (Nuclear), Foundry's, Mills, Aluminum, Steel, or other Heavy Industrial industries? Are you looking to grow your career from...

  • Laser Fabrication Specialist

    4 weeks ago

    Queen Creek, Arizona, United States Addictive Desert Designs Full time

    Job SummaryWe are seeking a skilled Laser Fabrication Specialist to join our team at Addictive Desert Designs. As a key member of our production team, you will be responsible for operating laser cutting and bending systems to produce high-quality sheet metal components.Key ResponsibilitiesOperate TRUMPF Boost Laser cutting and bending system programs to...

  • CNC Brake Press Operator

    1 month ago

    Pryor Creek, United States Stand-By Personnel Full time

    CNC Brake Press OperatorPay:$1619/hr.Hours:Monday Friday 6AM2PMJob Type:TempHireLocation:Pryor OklahomaJob Description:The CNC Brake Press Operator is responsible for operating a press brake to manufacture tools equipment and other components from sheet metal or metal plates. This role involves preparing setting up and adjusting the press brake according to...

  • CNC Brake Press Operator

    2 months ago

    Pryor Creek, United States Stand-By Personnel Full time

    CNC Brake Press OperatorPay:$1619/hr.Hours:Monday Friday 6AM2PMJob Type:TempHireLocation:Pryor OklahomaJob Description:The CNC Brake Press Operator is responsible for operating a press brake to manufacture tools equipment and other components from sheet metal or metal plates. This role involves preparing setting up and adjusting the press brake according to...

  • Industrial Equipment Technician

    4 weeks ago

    Goose Creek, South Carolina, United States Aerotek Full time

    Job Summary:Aerotek is seeking a skilled Industrial Equipment Technician to join our team. As an Industrial Equipment Technician, you will be responsible for maintaining and repairing industrial equipment, machinery, and structures.Key Responsibilities:Maintain and repair industrial equipment, machinery, and structuresInstall, inspect, and maintain piping...

  • Project Estimator

    2 months ago

    Goose Creek, United States Linton's Mechanical Full time

    Project Estimator with experience in structural steel, sheet metal, and custom fabrication needed for steel fabrication shop.Requirements and qualifications:Minimum 5 - 10 years in some form of project estimation.Minimum 5 years working with structural steel.Must be able to do take offs and cut sheets on Autocad.Must be able to do detailing work.Duties and...