![PDS Services](https://media.trabajo.org/img/noimg.jpg)
Electrical Test Engineer
1 month ago
Electrical Test Engineer III
Location: OnsiteKent, WA
Contract/CTH
Top Technical Skills Needed:
- Electrical power component test experience (component level, not system level).
- Environmental Testing (shock/vibration, feedback, etc.).
- Experience with LabVIEW/TestStand using National Instruments-based equipment.
- Electrical Engineering degree (EE)
- Experience with test execution and setting up test equipment.
- Minimum 5 years of experience, with 7+ years being ideal.
Top Cultural Attributes Needed:
- Strong collaboration and communication skills.
- Detail-oriented and methodical in test execution.
- Ability to work effectively in a team environment.
Responsibilities:
- Develop test plans, procedures, and scripts to perform shock, vibration, thermal, humidity, and vacuum testing on high and low voltage flight hardware.
- Conduct verification testing, including power-on, functional, acceptance, and qualification, and document test results for high and low voltage distribution, power regulation, and conversion hardware.
- Support the integration of vehicle hardware and analysis tooling necessary to verify the requirements and performance of units under test.
- Debug and troubleshoot hardware and software issues in a lab environment.
- Support integration and test activities, including wiring, hardware installation, and test bench setup.
- Participate in design and system reviews to provide feedback on integration and testability throughout all project phases.
- Participate in program-level technology development, mission assurance and safety initiatives, and development process improvements.
- Effectively communicate development status, risks, and challenges to management.
Minimum Qualifications:
- B.S. in electrical engineering or related technical discipline.
- 5+ years of relevant experience.
- Understanding of electronics hardware development such as testing high voltage switching, high voltage and power regulation, or other advanced electronic commercial or aerospace products.
- Experience with analog, digital, or mixed-signal circuit design, including analysis, simulation, test, troubleshooting, and part selection.
- Knowledge of signal integrity, power, grounding, and general board layout principles.
- Experience developing special electronic test equipment and troubleshooting equipment.
- Proficient in the use of standard electronic lab tests and troubleshooting equipment.
- Experience with programming in C++ and/or Python.
- NI Labview/TestStand experience.
- Good written, verbal, and interpersonal communication skills.
Preferred Qualifications:
- M.S. degree in electrical engineering or related technical discipline.
- 7+ years of relevant experience.
- Experience with the development and execution of a large-scale verification of avionics on autonomous spaceflight systems.
- Experience supporting testbeds for spaceflight systems.
- Proficiency with Electrical Design and Analysis tools: LTSpice, PSpice, SIMetrix/SIMPLIS, Simscape.
Work Authorization Requirements:
Must be a U.S. Person (U.S. citizen or national, U.S. permanent resident, or lawfully admitted into the U.S. as a refugee or granted asylum).
-
Electrical Test Engineer
1 month ago
Kent, United States PDS Full timeElectrical Test Engineer III Location: Onsite—Kent, WAContract/CTHTop Technical Skills Needed:Electrical power component test experience (component level, not system level).Environmental Testing (shock/vibration, feedback, etc.).Experience with LabVIEW/TestStand using National Instruments-based equipment.Electrical Engineering degree (EE) Experience with...
-
Electrical Test Engineer
1 week ago
Kent, United States PDS Full timeElectrical Test Engineer III Location: Onsite—Kent, WAContract/CTHTop Technical Skills Needed:Electrical power component test experience (component level, not system level).Environmental Testing (shock/vibration, feedback, etc.).Experience with LabVIEW/TestStand using National Instruments-based equipment.Electrical Engineering degree (EE) Experience with...
-
Electrical Test Engineer III
1 month ago
Kent, United States Rishabh RPO Full timeJob DescriptionJob DescriptionJob Title: Electrical Test Engineer IIILocation: Kent, WADuration: 6 Months + ExtensionPay rate: $69/HR on W2Responsibilities include but are not limited to:Develop test plans, procedures, and scripts to perform shock, vibration, thermal, humidity and vacuum testing on high and low voltage flight hardware.Conduct verification...
-
Electrical Test Engineer
1 month ago
Kent, United States Averro Full timeElectrical Test EngineerInitial Contract-to-hireSHIFT: Day ShiftEXTENSION/CONVERSION: EligibleBENEFITS: Medical insurance, 401K, sick leave, and employee assistance program. Depending on your package selection, Averro offers PTO, paid holidays, dental/vision, pet, and legal insurance.ROLE & RESPONSIBILITIESWe are seeking an Electrical Test Engineer for a...
-
Test Engineer
4 weeks ago
Kent, United States GTT, LLC Full timeJob DescriptionJob DescriptionTest Engineer Contract Duration 3+ Months Pay range $60 - $70/hrResponsibilities include but are not limited to:Test Engineer will develop test plans, procedures, and scripts to perform shock, vibration, thermal, humidity, and vacuum testing on high and low-voltage flight hardware.The Test Engineer will conduct verification...
-
Test Engineer
2 weeks ago
Kent, Washington, United States GTT, LLC Full timeElectrical Test Engineers (Test planning, Execution, Scripts for PVC controller, VNU, and RIO/FC testing)Contract Duration 6+ MonthsPay range - $70 to $80/hrJob Responsibilities include but are not limited to:Test Engineer will plan, complete, and report avionics development, qualification, and acceptance testingPerforming tests or ensuring that Technicians...
-
Test Engineer
1 month ago
Kent, United States GTT, LLC Full timeTest EngineerContract Duration 6 MonthsPay rate up to $47.89 to $57.95/hrJob Responsibilities include but are not limited to:Architecting systems to collect data from a variety of instrumentation.Test Engineer uses AutoCAD Electrical to perform the electrical design of Data system and/or control systems including enclosure design utilizing UL508A.Avionics...
-
Test Engineer
4 weeks ago
Kent, United States GTT, LLC Full timeJob DescriptionJob DescriptionElectrical Test Engineers (Test planning, Execution, Scripts for PVC controller, VNU, and RIO/FC testing)Contract Duration 6+ MonthsPay range - $70 to $80/hrJob Responsibilities include but are not limited to:Test Engineer will plan, complete, and report avionics development, qualification, and acceptance testingPerforming tests...
-
Test Engineer
1 month ago
Kent, United States GTT, LLC Full timeJob DescriptionJob DescriptionTest EngineerContract Duration 6 MonthsPay rate up to $47.89 to $57.95/hrJob Responsibilities include but are not limited to:Architecting systems to collect data from a variety of instrumentation.Test Engineer uses AutoCAD Electrical to perform the electrical design of Data system and/or control systems including enclosure...
-
Test Engineer
1 month ago
Kent, United States PDS Inc Full timeJob DescriptionJob DescriptionTest Engineer IIIResponsibilities include but are not limited to:Develop test plans, procedures, and scripts to perform shock, vibration, thermal, humidity and vacuum testing on high and low voltage flight hardware.Conduct verification testing that includes power-on, functional, acceptance and qualification and document test...
-
Electrical Component Engineer
2 weeks ago
Kent, United States HireTalent - Diversity Staffing & Recruiting Firm Full timePosition: Electrical Component EngineerLocation: Kent, WADuration: 6 Months W2 Contract (Possible FTE)Summary – would like to find candidates that lean more electrical component background.The general feedback is that we are looking for experience in 3 areas in this order:Electrical component – power distribution, power regulation. Preference for space...
-
Electrical Component Engineer
2 weeks ago
Kent, United States HireTalent - Diversity Staffing & Recruiting Firm Full timePosition: Electrical Component EngineerLocation: Kent, WADuration: 6 Months W2 Contract (Possible FTE)Summary – would like to find candidates that lean more electrical component background.The general feedback is that we are looking for experience in 3 areas in this order:Electrical component – power distribution, power regulation. Preference for space...
-
Electrical Engineer
7 days ago
Kent, United States Shape Corp Full timeAt Flow International Corp (Flow), a SHAPE company, we're devoted to a single goal: delivering innovative manufacturing process solutions that propel our customers to success. The Flow difference can be seen in our people. With industry leading technologists, manufacturing experts, and skilled service professionals, Flow team members listen to our customers...
-
Electrical Engineer
1 week ago
Kent, United States Shape Corp Full timeAt Flow International Corp (Flow), a SHAPE company, we’re devoted to a single goal: delivering innovative manufacturing process solutions that propel our customers to success. The Flow difference can be seen in our people. With industry leading technologists, manufacturing experts, and skilled service professionals, Flow team members listen to our...
-
Test Engineer
1 month ago
Kent, United States Insight Global Full timeResponsibilities include but are not limited to:Develop test plans, procedures, and scripts to perform shock, vibration, thermal, humidity and vacuum testing on high and low voltage flight hardware.Conduct verification testing that includes power-on, functional, acceptance and qualification and document test results for the high and low voltage distribution,...
-
Senior Electrical Engineer
3 weeks ago
Kent, United States Astronics Full timeSenior Electrical Engineer Astronics Subsidiary Astronics CSC - Kent Office Location Kent, WA Description Astronics Custom Control Concepts (Astronics CCC) designs, engineers, manufactures and certifies reliable digital in-flight entertainment and cabin management systems (IFE/CMS) for the corporate, private and VIP aircraft industry. Our custom digital...
-
Senior Electrical Engineer
3 weeks ago
Kent, United States Experis Full timeJob Title: Senior Electrical Engineer Location: Kent, WA Job type: Direct Hire / Permanent Placement Experience Level: Senior Level experience - hands-on individual contributor. Pay Range: $130K - $154K on W2 Interview Process: (3) Initial Phone Screening with Hiring Manager Virtual Panel interview On-site meeting with the team About the Company: ...
-
Senior Electrical Engineer
1 month ago
Kent, United States Astronics Full timeAstronics Subsidiary Astronics CSC - Kent Office Location Kent, WA Description Astronics Custom Control Concepts (Astronics CCC) designs, engineers, manufactures and certifies reliable digital in-flight entertainment and cabin management systems (IFE/CMS) for the corporate, private and VIP aircraft industry. Our custom digital applications have been...
-
Electronics/Electrical Systems Engineer
4 weeks ago
Kent, United States GTT, LLC Full timeJob DescriptionJob DescriptionElectronics/Electrical Systems Engineer Contract Duration 6+ MonthsPay range $68.48 - $82.86/hrJob DescriptionElectronics/Electrical Systems Engineer will develop an embedded controller design that interacts with avionics systems (including sensors and electromechanical/electrohydraulic actuators).Own this design, and the rugged...
-
Electronics/Electrical Systems Engineer
4 weeks ago
Kent, United States Global Technical Talent Full timeElectronics/Electrical Systems Engineer Contract Duration 6+ Months Pay range $68.48 - $82.86/hr Job Description Electronics/Electrical Systems Engineer will develop an embedded controller design that interacts with avionics systems (including sensors and electromechanical/electrohydraulic actuators). Own this design, and the rugged electronic hardware...