Hardware Engineer
4 weeks ago
RF Hardware Engineer
Springfield, MO
Full-time/Direct Hire Position
Job Location
This position is an on-site role.
Job Description
Under general supervision, the RF Hardware Engineer designs electronic products. The RF Hardware Engineer is responsible for designing, developing, and implementing new products following specified design, operational, and cost constraints, as well as providing engineering support for existing products.
Duties and Responsibilities
Designs and draws schematics using an Altium CAD system.
Selects parts/compiles parts list for product design and ECO release.
Debugs prototypes using spectrum analyzer, network analyzer, oscilloscopes, and other test equipment.
Designs For Manufacturing, (DFM) to meet requirements for on site electronic manufacturing facilities.
Consolidates designs to minimize scope of manufacturing inventory requirement.
Leads continuous improvement eorts for existing hardware products, including function and cost reduction.
Certifies completed designs for compliance submittals including UL, FCC, Industry Canada, and cellular carrier certifications.
Required Experience/Skills
7+ years minimum in Engineering product design and development for high volume manufacturing
Extensive experience in design & optimization of active RF circuits including amplifiers, receivers, and transmitters; passive RF circuits including filters, impedance matching networks, couplers, power splitters and combiners, phase shifters; RF structures including antennas, transmission lines and connectors. Frequency range of 900MHz to 2.2 GHz
Proficient in Ansys HFSS or CST Microwave Studio
Working knowledge of Keysight Genesis, ADS electronic design automation, AWR microwave oce, Qucs-S or equivalent RF circuit simulation CAD
Microprocessor, digital, analog design, TCP/IP, Ethernet and WiFi and troubleshooting experience
Power Supply design experience
Capacity to organize and carry out controlled experiments to assess design parameters
Strong problem-solving abilities, including the capacity to oversee investigations and carry out data analysis as required to address problems
Ability to think creatively and try different approaches as needed to address issues and adapt to a changing work environment
Superior technical writing abilities and documentation procedures
Excellent verbal communication abilities to provide design reviews to non-technical decision makers and other subject matter experts
Excellent interpersonal skills and the capacity to impact decisions while working successfully in cross-functional teams with representatives from various engineering disciplines, quality, buying, manufacturing, and marketing
A dedication to quality that embodies the company's ideals and an acceptance of accountability
Other
High levels of creativity are required for innovation and the creation of novel solutions.
Knowledge of creating and maintaining products for large-scale manufacturing and long term reliability.
Excellent organizational skills in project planning, prioritizing, and time management.
Protects operation by keeping information confidential.
Meets deadlines while conforming to DMP quality standards.
Acknowledges responsibility to satisfy the customer, reduce cycle time and eliminate waste.
May perform related duties or fill in for others in the department or other departments when requested. May train or instruct fellow workers regarding their own duties.
Contributes to team eort by performing other duties as assigned. Job duties are subject to change as directed by management.
Education
Bachelors Degree in Electrical Engineering or Wireless Engineering. Masters degree is a plus.
Pay & Benefits Summary
Pay is commensurate with experience with a competitive benefits package.
#J-18808-Ljbffr
-
Analog Hardware Engineer
5 days ago
Des Moines, United States DIT-MCO International Full timeDIT-MCO International , a leading manufacturer of electronic parts in the Aerospace Industry, is seeking an Analog Hardware Engineer to join their team in Kansas City, MO . Do you have a passion and experience in electronics revolving around the comprehensive development of analog board-level circuit designs? If so, we want to hear from you! Join our team as...
-
Hardware Engineer
3 days ago
Des Moines, United States Hubbell Full timePress Tab to Move to Skip to Content Link Select how often (in days) to receive an alert: Create Alert The Hardware Engineer provides technical excellence in developing Printed Circuit Board Assemblies (PCBA) for high volume electronic products associated with the Automated Metering Infrastructure (AMI) industry. Contribute to the development of...
-
Hardware Engineer
3 days ago
Des Moines, United States WORK180 USA Full timeThe Hardware Engineer provides technical excellence in developing Printed Circuit Board Assemblies (PCBA) for high volume electronic products associated with the Automated Metering Infrastructure (AMI) industry. Contribute to the development of documentation and PCBA deliverables from concept to production launch. Participate in product deployment and...
-
Lead Hardware Engineer
1 month ago
Des Moines, United States Cordius Ltd Full timeAre you ready to power the future of industrial efficiency? As a leading name in operational technology and digital transformation, my client, part of the globally renowned EDF Group, offers a unique opportunity for seasoned engineers. As part of our dynamic Nuclear team, you will be instrumental in leading critical projects, working at the forefront of the...
-
Senior Hardware Developer
4 days ago
Des Moines, United States Oracle Full timeOracle Senior Hardware Developer (JoinOCI-NDC) Des Moines , Iowa Apply Now Supports the design, deployment, and operations of a large-scale global Oracle cloud computing environment (Oracle Cloud Infrastructure - OCI). Primarily focused on the selection, test, qualification and support of our optical / connectivity products within Network Engineering. This...
-
Network Engineer
2 weeks ago
Des Moines, United States UnityPoint Health Full timeOverview The Network Engineer's role is to build, test, and implement wide area and local area network infrastructure solutions that support multiple facilities at various sites. This includes participation in consulting services, project management, network performance and capacity, configuration management, security, automated monitoring/alerting, disaster...
-
Storage Engineer
4 days ago
Des Moines, United States teKnoluxion Full timeOverview: Location : St. Louis, MO/Arnold, MO Security Clearance Required : Active TS (SCI eligibility) clearance and eligibility to obtain a CI poly is required upon application for initial consideration **This position is not open for any clearance upgrades or sponsorship.** Certification Required : CompTIA Security+ or similar for IAT Level II DoD 8570...
-
Senior Engineer
1 month ago
Des Moines, United States bioMérieux SA Full timeDescription The Senior Systems Platform Engineer is responsible for bioMérieux commercial system PC platforms released from the St. Louis site. This responsibility includes evaluating new hardware (PC and peripherals) and technologies and proposing solutions, configuring the OS, applying latest cybersecurity counter measures, supporting the verification and...
-
Linux Engineer
5 days ago
Des Moines, United States Inflow Full timeAt INflow Federal, we're not just navigating the frontier of digital transformation; we're reshaping it. Our dedication to merging the prowess of humans and machines to solve complex problems has set us apart in designing and engineering solutions for the Department of Defense (DoD) networks. Here, every challenge is an opportunity to advance, and every...
-
Flight Test Instrumentation Engineer
1 month ago
Des Moines, United States Boeing Future of Flight Full timeSt. Louis, MO, United States (On-site) Contract (11 months 27 days) Published 14 days ago Test Implementation Instrumentation Military Aircraft Flight Test flight simulation The Boeing Company is seeking a Flight Test Instrumentation Operations Engineer to support Flight Test in Berkeley, MO. The ideal candidate will need to have leadership, team building,...
-
Senior Automation Engineer
4 days ago
Des Moines, United States National Carwash Solutions, Inc. Full timeJob DescriptionJob DescriptionNational Carwash Solutions (NCS) has grown over the past 50 years to become North America’s largest equipment, service, and cleaning solutions provider in the car wash industry. Our world-class brands are backed by the largest service network in the country with more than 300 dedicated service professionals and growing! Come...
-
Senior Embedded Software Engineer
3 days ago
Des Moines, United States Intramotev Inc. Full timeAt Intramotev, we are building self-propelled railcars and vehicles to change the paradigm in freight logistics. We're providing the rail industry tools that will make the 200 year old industry competitive for the next 200 years. By helping us make rail competitive with trucking, you can contribute to work that matters in solving big societal problems like...
-
Technical Solutions Engineer
4 days ago
Des Moines, United States Arista Networks Inc Full timeTechnical Solutions Engineer - NetDevOps Full-time Arista Networks was founded to pioneer and deliver software-driven cloud networking solutions for large data center storage and computing environments. Arista’s award-winning platforms, ranging in Ethernet speeds from 10M to 400G bits per second, redefine scalability, agility and resilience. Arista has...
-
Principal Controls
2 weeks ago
Des Moines, United States Dsjglobal Full timeJob Title: Principal Controls & Instrumentation Engineer Industry: Pharmaceuticals Location: St. Louis, MO A global Pharmaceutical company is looking for a Principal Project Controls-Instrumentation Engineer to support the project engineering group and is responsible for the engineering design, implementation of upgrades, and improvements to the site control...
-
Electrical Engineer
6 days ago
Des Moines, United States Intramotev Inc. Full timeIntramotev is seeking an Electrical Engineer to join the development team to meet growing demands in the development of self-propelled rail vehicles. Intramotev is developing multiple unmanned self-propelled vehicles. The role has a strong electrical focus with additional software abilities – the successful candidate will be a member of the development...
-
Design and Analysis Engineer 3
1 month ago
Des Moines, United States Boeing Future of Flight Full timeDesign and Analysis Engineer 3 (Contract) St. Louis, MO, United States (On-site) Contract (12 months) Published a day ago Tests System Integration At Boeing, we are all innovators on a mission to connect, protect, explore and inspire. From sea bed to outer space, you’ll learn and grow while contributing to work that shapes the world. Find your future with...
-
Manufacturing Engineer
1 week ago
Des Moines, United States Parker Hannifin Corporation Full timeManufacturing Engineer Location: KENT, WA, United States Job Family : Mfg & Prod Engineering Job Type : Regular Posted : May 10, 2024 Job ID: 48983 Back to Search Results Job Description Apply Now > Save Job Job Saved Parker Aerospace is a global leader in commercial and military aircraft and aeroengine technology. With the addition of Parker Meggitt, the...
-
Manufacturing Engineer
3 weeks ago
Des Moines, United States Parker Hannifin Corporation Full timeManufacturing Engineer Location: KENT, WA, United States Job Family : Mfg & Prod Engineering Job Type : Regular Posted : Apr 2, 2024 Job ID: 47974 Job Description is a global leader in commercial and military aircraft and aeroengine technology. With the addition of , the company collaborates with customers to enable engineering breakthroughs that lead to a...
-
Quality Engineer
5 days ago
Des Moines, United States Parker Hannifin Corporation Full timeQuality Engineer Location: KENT, WA, United States Job Family : Quality Job Type : Regular Posted : Apr 3, 2024 Job ID: 45295 Job Description is a global leader in commercial and military aircraft and aeroengine technology. With the addition of , the company collaborates with customers to enable engineering breakthroughs that lead to a better tomorrow. Are...
-
Solutions Engineer
1 week ago
Des Moines, Iowa, United States Aureon Full timeThe Solutions Engineer (SE) is responsible for supporting the sales team in acquiring new business as well as renewing and upgrading existing business. The SE is responsible for providing technical guidance and developing solutions with Aureon's clients and prospects throughout the pre and post-sales process. The SE will be required to regularly engage...