CNC Operator

3 weeks ago

Fullerton, United States Howmet Aerospace Full time
Responsibilities

Howmet Fastening Systems (HFS) is seeking a CNC Operator at our aerospace manufacturing facility in the Fullerton, CA.

Howmet Fastening Systems (HFS) holds the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aero engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment. Headquartered in Torrance, CA; we employ over 6,000 people in 11 countries at 32 locations. HFS is a business unit of Howmet (NYSE: HWM).

Summary

Requires, under guidance of senior personnel, the operation of CNC controlled machine tools to perform any sequence of programmed operation using programs and tool layouts provided.

Essential Duties and Responsibilities
  • Selects and sets proper tooling as identified on tool layout to correspond with program.
  • Makes set-ups by using typical tooling fixtures and indicating target diameters, hole alignments, or spindle run-out.
  • Loads and proves out program and runs and self-inspects first article samples. Adjusts set-up as necessary to conform to dimensions and tolerances.
  • Completes as directed all necessary documentation for each set-up. Such as S.P.C. charts, set-up checklist, first article verification, etc.
  • Run, monitor and troubleshoot equipment in production, adjusting set-up as necessary.
  • Monitor tool life and dimensional characteristics of product. Replenish tooling as directed.
  • Monitor process using S.P.C. techniques.
  • Parts to be lifted and/or transported may weigh up to 30 lbs.
  • Reads blueprints and has the knowledge to use micrometers, calipers, comparators, thread gauges, depth micrometers and dial indicators as needed.
  • Keeps work area clean, safe and in an orderly fashion on a daily basis.
  • Performs other tasks of equal or lesser skill as required.
Qualifications

Basic Qualifications:
  • Minimum of two years related experience and/or training in machine shop operation running a variety of machine shop equipment including CNC equipment; or equivalent combination of education and experience.
  • Ability to read and interpret blueprints and work instructions
  • Understanding of cutting tools (offset and geometry) and must know "G" and "M" Codes
  • Excellent troubleshooting skills
  • Willing to cross train and/or assist other departments to meet facility goals
  • Use the necessary measuring tools (Micrometers, Calipers, Dial Indicators, Comparator, Gages, etc) as required
  • Good communication skills
  • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
  • This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.
Physical Demands:
  • Must be able to lift/move 30 lbs. (may not exceed per EHS policies)
  • Must be able to stand for long periods of time
Preferred Qualifications:
  • High School Diploma or GED equivalent
  • Understanding of 5S principals; Sort, Simplify, Shine, Standardize and Sustain
  • SPC knowledge highly desirable


Benefits/Salary:

The position includes competitive wages and a comprehensive benefits package available day one of hire, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $19.00 to $24.00.

About Us

About Howmet Aerospace

Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at www.howmet.com/esg-report.

Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube.

Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.

If you need assistance to complete your application due to a disability, please email [email protected]

About the Team

Howmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.

  • CNC Operator

    2 weeks ago

    Fullerton, California, United States Swift Outsourcing Solutions OC, LLC Full time

    Job DescriptionJob DescriptionSOS is a purpose-driven organization with powerful convictions, we assume positive intent and proudly work hard to bring out the best in our associates. Continued growth is a vital part of our success; however, this is not our only driving factor. Our team aims to impact and improve our local communities by bringing an end to...

  • CNC Machine Operator

    1 month ago

    Fullerton, United States OurStaff, LLC Full time

    Job DescriptionJob DescriptionCNC MACHINE OPERATOR/ MACHINISTFullerton, CA1st and 2nd shiftJob Summary & ResponsibilitiesWe are looking for an CNC Lathe or Mill Operator/Machinist to work for a machine shop located in Fullerton, CA. The Operator/Machinist will be responsible to verify settings by measuring positions, first-run part, and sample work pieces;...

  • CNC Operator

    3 weeks ago

    Fullerton, United States Howmet Aerospace Full time

    ResponsibilitiesHowmet Fastening Systems (HFS) is seeking a CNC Operator - Chuckers at our aerospace manufacturing facility in the Fullerton, CA. Howmet Fastening Systems (HFS) holds the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material...

  • CNC Operator

    3 weeks ago

    Fullerton, United States Howmet Aerospace Full time

    ResponsibilitiesHowmet Fastening Systems (HFS) is seeking a CNC Operator - Chuckers at our aerospace manufacturing facility in the Fullerton, CA. Howmet Fastening Systems (HFS) holds the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material...

  • CNC Machine Operator

    2 weeks ago

    Fullerton, United States OurStaff, LLC Full time

    Job DescriptionJob DescriptionCNC MACHINE OPERATOR/ MACHINIST - Entry LevelFullerton, CA2nd shift (training on 1st shift)$17-$19/hr (DOE)Job Summary & ResponsibilitiesWe are looking for an CNC Lathe or Mill Operator/Machinist to work for a machine shop located in Fullerton, CA. The Operator/Machinist will be responsible to verify settings by measuring...

  • CNC General Machinist

    4 weeks ago

    Fullerton, California, United States Aerotek Full time

    Description:Large aerospace manufacturer in Fullerton. Looking for a 2nd shift (3pm-1:30am) Machinist who is have experience setting up CNC or conventional machines. Open to experience on Mill or Lathe machines. Plenty of OT hours available if wanted. Essential Functions:• Sets up and operates conventional lathe, knee and column mill, drill press, surface...

  • CNC General Machinist

    4 weeks ago

    Fullerton, California, United States Aerotek Full time

    Description:Large aerospace manufacturer in Fullerton. They have a diverse portfolio of products. Looking for a 2nd shift (3pm-1:30am) General Machinist, CNC lathe and Mill machinist who is capable of the following: Essential Functions:• Sets up and operates conventional lathe, knee and column mill, drill press, surface grinder, and honing machines.•...

  • CNC Mill Machinist

    3 weeks ago

    Fullerton, United States Aerotek Full time

    **Job Title: 2nd Shift Machinist** **Job Description** Join our team at a large aerospace manufacturer as a 2nd Shift Machinist. The role requires operating a variety of machines including 5 Axis Milling Machines, CNC Vertical Mills, and conventional machines such as lathes and mills. You will be responsible for setting up and operating these machines to cut...

  • CNC Machinist A

    4 weeks ago

    Fullerton, United States HydraFlow Full time

    EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. About the Organization Hydraflow provides fluid transfer solutions that...

  • 2nd Shift CNC Mill Machinist

    1 week ago

    Fullerton, United States Kimco Staffing Services Full time

    Job DescriptionJob DescriptionWe are looking for a CNC Mill Machinist, with experience on 4/5 axis experience. Don't miss out, submit your resume today!CNC Mill MachinistLocation: Fullerton, CAHours: 2nd Shift (3 PM Start Time + OT) Pay: $28.00 to $30.00 an hour DOEEssential Functions:Set up and operate 2 axis, sub-spindle and y-axis lathe machinesSets...

  • 2nd Shift CNC Mill Machinist

    1 week ago

    Fullerton, United States Kimco Staffing Services Full time

    Job DescriptionJob DescriptionWe are looking for a CNC Mill Machinist. Don't miss out, submit your resume today!CNC Mill MachinistLocation: Fullerton, CAHours: 2nd Shift (3 PM Start Time + OT) Pay: $28.00 to $30.00 an hour DOEEssential Functions:Set up and operate 2 axis, sub-spindle and y-axis lathe machinesSets up and operates 3, 4, and 5 axis CNC...

  • CNC General Machinist- APPLY NOW

    5 days ago

    Fullerton, California, United States Aerotek Full time

    Description:Large aerospace manufacturer in Fullerton. Facility produces a diverse portfolio of products (cockpit components, interior and exterior hardware, lavatory equipment). Looking for a 2nd shift (3pm-1:30am) Lead/supervisor General Machinist who is capable of the following: Requires preparation and set up of any machines such as Engine Lathes, Turret...

  • CNC Swiss Lathe Machinist

    1 month ago

    Fullerton, United States OurStaff, LLC Full time

    CNC SWISS LATHE MACHINIST Fullerton, CA2nd shiftPay rate: DOEJob Summary & ResponsibilitiesWe are looking for an CNC Swiss Lathe Machinist to work for a machine shop located in Fullerton, CA. The Swiss Lathe Machinist will be responsible to verify settings by measuring positions, first-run part, and sample work pieces; adhering to drawing and process control...

  • CNC Machinist A

    1 week ago

    Fullerton, United States HydraFlow Full time

    EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. About the Organization Hydraflow provides fluid transfer solutions that...

  • CNC Mill Machinist

    4 weeks ago

    Fullerton, United States Amtec Contract Full time

    Job DescriptionJob DescriptionPosition summary:Prepares and sets up the CNC mills within the department for the fabrication of a variety of hardware used in the aircraft industry.Essential Functions:Sets up and operates 3, 4, and 5 axis CNC Mills to produce quality parts within the standards on the route sheet.Uses rotary table, index head, and various...

  • CNC Swiss Lathe Machinist

    1 month ago

    Fullerton, United States OurStaff, LLC Full time

    Job DescriptionJob DescriptionCNC SWISS LATHE MACHINIST Fullerton, CA2nd shiftPay rate: DOEJob Summary & ResponsibilitiesWe are looking for an CNC Swiss Lathe Machinist to work for a machine shop located in Fullerton, CA. The Swiss Lathe Machinist will be responsible to verify settings by measuring positions, first-run part, and sample work pieces; adhering...

  • Operator III

    3 weeks ago

    Fullerton, California, United States The Gund Company Full time

    :OverviewJoin The Gund Company, where you will find friends who will support and challenge you to crush goals that provide amazing growth opportunities. We are in the business of electrical insulation manufacturing, but we really pride ourselves in just being a group of fun, driven, problem solvers who LOVE what we doThe Gund Company: Take Care of Each...

  • CNC Screw Machinist

    4 weeks ago

    Fullerton, United States Amtec Contract Full time

    Job DescriptionJob DescriptionPosition summary:Set-up and operates one or more CNC Screw Machines to perform a series of machining operations, such as boring, threading, facing, grooving, drilling, and turning.Essential Functions:Works from routers and standard work orders to produce parts to specifications.Loads bar feeders and monitors overall machine...

  • Mechanical Assembler

    3 weeks ago

    Fullerton, United States Pathway Group Full time

    Job DescriptionJob Description1st Shift 6 am start time plus OT Hourly Rate DOE: $18.00 - $20.00 Position summary: Works independently in the performance of short cycle assembly of mechanical products and subassemblies with a high level of complexity. Essential Functions:Assembles and tests precision assemblies and sub-assemblies such as regulators,...

  • Machinist A

    4 weeks ago

    Fullerton, United States HydraFlow Full time

    EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. About the Organization Hydraflow provides fluid transfer solutions that...