Current jobs related to Machinist III - Jacksonville - Ring Power
-
General Machinist III
4 weeks ago
Jacksonville, United States Kamatics Corporation Full timeOverviewSince our founding in 1945, Kaman has had a mindset of constant improvement and creativity. In this way, we fulfill our most important responsibility: providing our customers with solutions to their critical technical and systems challenges. With the resources to pursue large scale endeavors, we continue to recognize and encourage each person's...
-
General Machinist III
4 weeks ago
Jacksonville, United States Kaman Full timeOverviewSince our founding in 1945, Kaman has had a mindset of constant improvement and creativity. In this way, we fulfill our most important responsibility: providing our customers with solutions to their critical technical and systems challenges. With the resources to pursue large scale endeavors, we continue to recognize and encourage each person's...
-
Machinist III
2 weeks ago
Jacksonville, United States Kaman Aerospace Full time $21 - $32Machinist IIIOverview:The General Machinist III works under the general direction of the Supervisor, Operations, and daily direction of a Cell Leader with limited supervision. Sets up and operates conventional, special-purpose, and numerical control machines and machining centers such as mills, lathes, checkers, and honing machines to make metal parts to...
-
Machinist III
2 weeks ago
Jacksonville, United States Kaman Aerospace Full timeMachinist IIIOverview:The General Machinist III works under the general direction of the Supervisor, Operations, and daily direction of a Cell Leader with limited supervision. Sets up and operates conventional, special-purpose, and numerical control machines and machining centers such as mills, lathes, checkers, and honing machines to make metal parts to...
-
Machinist III
2 weeks ago
Jacksonville, United States Kaman Aerospace Full time $21 - $32Machinist IIIOverview:The General Machinist III works under the general direction of the Supervisor, Operations, and daily direction of a Cell Leader with limited supervision. Sets up and operates conventional, special-purpose, and numerical control machines and machining centers such as mills, lathes, checkers, and honing machines to make metal parts to...
-
General Machinist III
4 months ago
Jacksonville, United States Kaman Full timeOverviewThe General Machinist III works under the general direction of the Supervisor, Operations and daily direction of a Cell Leader with limited supervision. Sets up and operates conventional, special-purpose and numerical control machines and machining centers such as mills, lathes, chuckers and honing machines to make metal parts to exacting tolerances...
-
General Machinist III
4 months ago
Jacksonville, United States Kamatics Corporation Full timeOverviewThe General Machinist III works under the general direction of the Supervisor, Operations and daily direction of a Cell Leader with limited supervision. Sets up and operates conventional, special-purpose and numerical control machines and machining centers such as mills, lathes, chuckers and honing machines to make metal parts to exacting tolerances...
-
Machinist Specialist
1 week ago
Jacksonville, Florida, United States Kaman Aerospace Full timeMachinist III Job DescriptionAt Kaman Aerospace, we are seeking a highly skilled Machinist III to join our team. As a key member of our operations team, you will be responsible for setting up and operating conventional, special-purpose, and numerical control machines to produce high-quality metal parts.Key Responsibilities:Perform intricate hand grinding...
-
Outside Machinist III
3 weeks ago
Jacksonville, United States EPSILON SYSTEMS Full timeEpsilon Systems Mission Readiness Group is currently seeking a full-time Outside Machinist III in Mayport, FL.Summary: Repairs, modifies or overhauls various types of equipment or systems. Sets up and operates portable machining tools or equipment with constant supervision.Responsibilities: Reports directly to the Production Manager. Once assigned reports...
-
Outside Machinist III
3 weeks ago
Jacksonville, United States Epsilon Systems Full timeEpsilon Systems Mission Readiness Group is currently seeking a full-time Outside Machinist III in Mayport, FL.Summary: Repairs, modifies or overhauls various types of equipment or systems. Sets up and operates portable machining tools or equipment with constant supervision.Responsibilities: Reports directly to the Production Manager. Once assigned reports...
-
CNC Machinist III
3 weeks ago
Jacksonville, Florida, United States RTX Full timeAbout the RoleWe are seeking a highly skilled CNC Machinist III to join our team at Collins Aerospace in Jacksonville, FL. As a CNC Machinist III, you will be responsible for setting up and operating multiple CNC Machine Centers, machining complex composite products, and maintaining a safety-first and teamwork mindset.Key ResponsibilitiesSet up and operate...
-
Outside Machinist Specialist
3 weeks ago
Jacksonville, Florida, United States Epsilon Systems Full timeJob SummaryEpsilon Systems is seeking a highly skilled Outside Machinist III to join our team. As a key member of our production team, you will be responsible for repairing, modifying, and overhauling various types of equipment and systems.Key ResponsibilitiesRepair and modify equipment and systems to meet quality and safety standardsSet up and operate...
-
Advanced CNC Machinist III Position
1 month ago
Jacksonville, Florida, United States Raytheon Technologies Full timeCountry: United States of America Location: HFL04: ASG Jacksonville-Blount Island Overview: Collins Aerospace, a leader in the aerospace and defense industry and part of Raytheon Technologies, is looking for a skilled CNC Machinist III to work at our facility in Jacksonville, FL. This role is essential in our mission to innovate and enhance aerospace...
-
Advanced CNC Machinist Position
4 weeks ago
Jacksonville, Florida, United States Raytheon Technologies Full timeCountry: United States of America Location: Collins Aerospace facility Collins Aerospace is in search of a skilled CNC Machinist III for an onsite role. At Collins Aerospace, we offer more than just a job; we present an opportunity to engage in a transformative journey that is reshaping the future of aerospace and marine defense technology. As a...
-
CNC Machining Specialist III
1 month ago
Jacksonville, Florida, United States Raytheon Technologies Full timeCountry: United States of America Position Overview: Collins Aerospace is on the lookout for a skilled CNC Machinist III to join our operations. This role is essential for our advanced manufacturing processes and requires a high level of expertise in CNC machining. At Collins Aerospace, we are committed to pioneering the future of aerospace and marine...
-
Cell Lead, Machine Shop
3 weeks ago
Jacksonville, United States Kaman Aerospace Full timeSince our founding in 1945, Kaman has had a mindset of constant improvement and creativity. In this way, we fulfill our most important responsibility: providing our customers with solutions to their critical technical and systems challenges. With the resources to pursue large scale endeavors, we continue to recognize and encourage each person’s ability to...
Machinist III
3 months ago
Main Duties & Responsibilities:
Primary Job Role
Attends and successfully completes required training classes.
Conducts all assigned work in a safe manner, adhering to all applicable safety, environmental and contamination control policies, procedures and regulations. Wears proper personal protective equipment.
Interprets engineering prints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements with minimal support from supervisor or higher level machinists.
Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, jig borers, grinders, and shapers. Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enter commands to retrieve, input, or edit computerized machine control media with minimal support from supervisor or higher level machinists.
Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required. Verifies conformance of finished work piece to specifications with minimal support from supervisor or higher level machinists.. Fit and assemble parts, as necessary.
Approaches work in a positive manner, maintains conduct that is supportive of the work Team and sets the standard for others to follow. Contributes to Team efforts by accomplishing tasks on time while maintaining safety and quality expectations.
Monitors job expenses versus estimates and ensures that the supervisor is aware of any cost over run, prior to the job being completed.
Performs other duties as assigned.
Essential Job Competencies
Safety: fully supports, encourages and follows safe work behavior, and considers safety of paramount importance in the workplace.
Job Specific Skills: Demonstrates the required depth and mastery of knowledge and skill associated with the job as identified in the Learning Management System (LMS) and other applicable sources. Demonstrates the effective application of the job specific knowledge, skills and ability required to resolve job related challenges in the workplace. Refer to job specific training requirements for the job identified in the LMS.
Communication: Uses active listening skills, conveying information with the appropriate medium that is clear and easily understood. Uses feedback to verify effective and accurate communication has occurred. Ensures that others having a need to know are kept informed about developments, progress, problems and plans through consistent, effective communication. Avoids surprises.
Takes Initiative: Takes appropriate action to resolve issues without requiring direction. Seeks out others involved in a situation to learn their perspectives. Makes difficult decisions in a timely manner. Is willing to make decisions in difficult or ambiguous situations, when time is critical. Assertive in a group when it is necessary to facilitate change, overcome an impasse, face issues, or ensure that decisions are made.
Results Oriented: Has a strong sense of urgency and commitment to achieve desired results in the face of obstacles and frustrations. Remains focused, does not get bogged down in unnecessary detail. Identifies and utilizes the most efficient methods to successfully achieve tasks on time despite unforeseen events. Driven, maintains a sense of urgency and adjusts schedules as needed to achieve without sacrificing quality of work.
Confidence and Drive: Confident in one's own ideas and capability to be successful; willingness to take an independent position in the face of opposition. Approaches challenging tasks with a "can-do" attitude. Driven to see projects and tasks through to successful completion, is not swayed by resistance and focuses on achievement of the initiative.
Adaptability: Adapts to changing business needs, conditions, and work responsibilities. Adapts approach, goals, and methods to achieve solutions and results in dynamic situations. Recovers quickly from setbacks, and finds alternative ways to reach goals or targets. Open to different and new ways of doing things; willing to modify one's preferred way of doing things.
Credibility: Demonstrated concern to be responsible, reliable, and trustworthy. Maintains commitments. Respects the confidentiality of information or concerns shared by others. Is honest and forthright with people. Takes personal responsibility for the quality and timeliness of work. Punctual, follows instructions, policies, and procedures.
Personal Development: Takes responsibility for personal learning and development by acquiring and refining technical and professional skills needed in job related areas. Obtains developmental opportunities proactively. Actively seeks and embraces growth opportunities.
Company Overview:In 1962, Ring Power Corporation became a full-line Caterpillar dealer in North Florida, and later expanded its authorized territory to include Central Florida.
Today, Ring Power Corporate headquarters in St. Augustine oversees the operations of 18 branch locations throughout the state of Florida, including large regional facilities in Tampa and Orlando and crane and forklift sales and service facilities in Pompano. Ring Power also has eight facilities outside of Florida - The Carolinas, Georgia, Texas & Tennessee- to serve the needs of other specialized industries and customers.
Ring Power Corporation has become one of the largest Caterpillar dealers in the Southeastern United States through dedication to the mission of customer service. In order to preserve the "Customers First" reputation that Ring Power was built on, we continually train our employees and work closely with our customers to assure complete satisfaction, especially after the sale.
Currently, more than 2,300 employees at 20+ locations throughout Florida and the United States work hard to provide the highest quality construction equipment, backed by responsive, professional service and support at every level.
Qualifications:Education and Experience
Formal Education High School diploma or GED
Experience 1-2 years
Required / Credentials
Able to easily and effectively comprehend written material and communicate orally and in writing with employees and customers.
Successfully completed all required training curriculum to be designated Machinist III.
Moderate level capability in the use of a computer, Microsoft Office products and relevant Dealer software programs.
Not Required but Highly Desired Criteria
Proficient in the use of a computer, Microsoft Office products and relevant Dealer software programs.
Updating of Knowledge
Job requirements frequently change requiring re-training once or more per year.
Responsibility for Change, Innovation, Overall Improvement, and/or Effectiveness
Problem Solving Job requires basic problem solving ability using established examples / guidance.
Creativity Job requires no significant use of creativity in generating solutions or identifying improvement opportunities.
Autonomy Job is closely monitored and allows for no significant discretion or independence in scheduling or methods of completing assigned work.
Working EnvironmentStress Load Regular exposure to these stresses (20-80% of the time).
Workload Fluctuation Job frequently involves changes in priorities, complexity and/or quantity of work.
Work Schedule Work is typically performed during regular business hours with occasional requirements to work nights, holidays and weekends.
Organizational Impact
A person's performance in this job has noticeable immediate impact on expense, efficiencies or achievement of overall department objectives.
Supervisory Responsibility
Job has no subordinates / no supervisory responsibility (may work independently or as a member of a team).
Physical Demands
"NA": Not Applicable
"O": Occasionally - (up to 3 hours/day)
"F": Frequently - (3-6 hours/day)
"C": Constantly - (6-8 hours/day)
O: Climbing
O: Balancing
O: Stooping
O: Kneeling
O: Crouching
O: Crawling
O: Reaching
C: Standing
O: Sitting
F: Walking
O: Feeling
O: Fingering
C: Grasping
F: Repetitive Motion
O: Talking
F: Hearing
O: Pushing - Up to 25 lbs.
O: Pulling - Up to 25 lbs.
O: Lifting - Up to 25 lbs.
O: Pushing - 26-50 lbs
O: Pulling - 26-50 lbs.
O: Lifting - 26-50 lbs.
N/A: Pushing - Over 50 lbs.
N/A: Pulling - Over 50 lbs.
N/A: Lifting - Over 50 lbs.
Environmental Conditions
"NA": Not Applicable
"O": Occasionally - (up to 3 hours/day)
"F": Frequently - (3-6 hours/day)
"C": Constantly - (6-8 hours/day)
F: Inside conditions: Protection from weather but not necessarily from temperature change.
O: Outside environmental conditions: No effective protection from weather.
O: Extreme cold: Temperatures below 32 degrees for periods of more than one hour.
O: Extreme heat: Temperatures above 100 degrees for periods of more than one hour.
F: Noise: sufficient noise to cause the worker to shout to be heard above the ambient noise level
O: Vibration: Exposure to oscillating movements of the extremities of whole body.
F: Hazards: Includes a variety of physical conditions (i.e. proximity to moving mechanical parts, electrical current, working in high places, exposure to heat and/or chemicals.
O: Atmospheric conditions: One or more of the following conditions that affect the respiratory system or the skin: Fumes, odors, dust, mists, gases or poor ventilation.
F: Oils: There is air and/or skin exposure to oils and other cutting fluids.
O: Air particulates / contaminants: the worker is required to wear respirator.
RING POWER CORPORATION, INC. IS AN EQUAL OPPORTUNITY EMPLOYER