CNC Programmer

2 weeks ago

Houston, United States 1 Resource Group Staffing Full time

1 Resource Group is excited to announce a new opportunity for a CNC Programmer to join our clients team. As a CNC Programmer, you will play a key role in programming and operating CNC machines to create high-quality precision parts.

Responsibilities include:

  • Consults with Design Engineers during the design phase to foster economically producible and effective designs for machined parts
  • Creates CNC programs for precision machined parts on a variety of CNC machine tools including 3, 4, and 5 axis vertical and horizontal machining centers, CNC lathes, and wire EDMs
  • Maintains programs and documentation in a formal methodical system
  • Updates and streamlines older programs into new systems / machines
  • Provides support to the Manufacturing Machine Center and assists in problems solving
  • Recommends improvements in methods and tools utilizing the latest technologies to maximize manufacturing performance
  • Lowers cycle time and reduces scrap
  • Designs new product and implements tooling and fixtures needed by Machine Center
  • Recommends inspection tools and equipment
  • Provides run time and set-up time estimates for cost accounting
  • Writes clear set up instructions for each part
  • Designs Fixtures for New Products in consultation with Design Engineers, design layout tools, gage clamps, and assembly fixturing. Provides guidance to the Experimental Machinist to facilitate fabrication
  • Provides Design Engineers with advice in designing for practical and cost-effective machining
  • Completes technical training and company orientation as required to strengthen organizational and technical knowledge

Requirements

  • Maintains the work area and equipment in a clean, orderly condition and follows prescribed safety procedures
  • This position is responsible for adherence to all safety rules and regulations
  • Utilizes tools and technology provided in an effective and efficient manner
  • Ensure communication with customers, suppliers, vendors, and co-workers are professional and appropriate

Job Qualifications:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required to perform the essential functions of the job.

General -

Must be willing to work all shifts, overtime weekends and work well with others

Fit for duty in clean and presentable manner

Willing to attend on-going training to further professional development

Able to travel within and outside of the continental US

Education -

Required High school diploma or equivalent

Preferred Associates or bachelor's degree in CAD/CAM software or related field

Experience -

Required 5+ years' experience in manufacturing

Experience In SolidWorks, SolidCam, And MasterCam

Preferred experience on Okuma 5 axis machines

Preferred Knowledge Of Power And Oil & Gas Industries

Certifications/Licenses-

Valid Driver License

Passport

Skills

Active Learning Understanding the implications of new information for both current and future problem-solving and decision-making.

Active Listening Giving appropriate attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.

Attention to Detail Maintaining appropriate attention to detail based on the complexity of work performed.

Communication and Comprehension Conveying written and/or non-written information effectively; comprehending and understanding documentation and verbal or visual communications.

Complex Problem Solving Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions.

Critical Thinking Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.

Instructing Teaching others how to perform tasks by selecting and using training/instructional methods and procedures appropriate for the situation when teaching new things.

Judgment and Decision Making Considering the relative costs and benefits of potential actions to choose the most appropriate one.

Mathematics Using mathematics for calculations.

Monitoring Monitoring/Assessing performance of yourself or organizations to make improvements or take corrective action.

Service Orientation Actively looking for ways to help people.

Time Management Managing one's own time.

Abilities:

Category Flexibility The ability to generate or use different sets of rules for combining or grouping things in different ways.

Deductive Reasoning The ability to apply general rules to specific problems to produce answers that make sense.

Fluency of Ideas The ability to come up with a number of ideas about a topic.

Inductive Reasoning The ability to combine pieces of information to form general rules or conclusions.

Information Ordering The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).

Mathematical Reasoning and Number Facility The ability to choose the right mathematical methods or formulas to solve a problem; the ability to perform calculations quickly and correctly.

Originality The ability to come up with original or novel ideas for a certain situation, or to develop creative ways to solve a problem.

Problem Sensitivity The ability to tell when something is wrong or is likely to go wrong..

Selective Attention The ability to concentrate on a task over a period of time without being distracted.

Speed of Closure The ability to quickly make sense of, combine, and organize information into meaningful patterns.

Time Sharing The ability to shift back and forth between two or more activities or sources of information

Tools/Equipment Used:

Desktop and laptops computers

Flash drives

Copiers

Scanners

Telephones

Various Hand Tools, both power and manual

Technology Skills:

Basic Computer & Telephone

Electronic mail software Microsoft Outlook

Office suite software Microsoft Office 360

Spreadsheet software Microsoft Excel

CAD/CAM, ESPRIT, GIBBS, NX and SolidWorks software knowledge Benefits Medical, Dental , Vision

  • CNC Programmer

    3 weeks ago

    Houston, United States Carlton Staffing Full time

    Job DescriptionJob DescriptionDIRECT HIRE opportunity for a CNC Programmer in the Southeast Houston area! Apply today!Machining company in Southeast Houston is currently hiring an experienced CNC Programmer to join their team! In this role, the CNC Programmer will be responsible for programming CNC mills and lathes using ESPRIT CAM software. This position...

  • CNC Programmer

    1 week ago

    Houston, United States NES Fircroft Full time

    Responsibilities & Qualifications of the CNC Programmer include, but are not limited to : Required 5+ years’ experience in manufacturing Experience in SolidWorks, SolidCam, and MasterCam Preferred experience on Okuma 5 axis machines Preferred knowledge of Power and Oil & Gas industries Summary of Position The CNC Programmer position codes, tests, debugs,...

  • CNC Programmer

    3 weeks ago

    Houston, United States ProSource Staffing Full time

    Skilled CNC operator/programmer with experience with Gibbs Cam, MasterCam, Fanuc and HAAS Controls. Set up, operate, and edit/adjust program in both horizontal and vertical mills. Monitor machine operations for any malfunctions and adjust as needed. Knowledge of metal and other material properties. Physical stamina and strength to lift and adjust heavy items...

  • CNC Programmer

    3 weeks ago

    Houston, United States ProSource Staffing Full time

    Skilled CNC operator/programmer with experience with Gibbs Cam, MasterCam, Fanuc and HAAS Controls. Set up, operate, and edit/adjust program in both horizontal and vertical mills. Monitor machine operations for any malfunctions and adjust as needed. Knowledge of metal and other material properties. Physical stamina and strength to lift and adjust heavy items...

  • CNC Programmer

    3 weeks ago

    Houston, United States ProSource Staffing Full time

    Skilled CNC operator/programmer with experience with Gibbs Cam, MasterCam, Fanuc and HAAS Controls. Set up, operate, and edit/adjust program in both horizontal and vertical mills. Monitor machine operations for any malfunctions and adjust as needed. Knowledge of metal and other material properties. Physical stamina and strength to lift and adjust heavy items...

  • CNC Programmer

    2 weeks ago

    Houston, United States NES Fircroft Full time

    Responsibilities & Qualifications of the CNC Programmer include, but are not limited to:Required 5 years’ experience in manufacturingExperience in SolidWorks, SolidCam, and MasterCamPreferred experience on Okuma 5 axis machinesPreferred knowledge of Power and Oil & Gas industriesSummary of Position The CNC Programmer position codes, tests, debugs,...

  • CNC Programmer

    2 days ago

    Houston, United States LSI Staffing Full time

    *LSI Staffing Houston has an Immediate CNC Mill-Programmer position at our client in NE Houston.**LEAD Machine SHOP!! WEEKLY PAY!**CNC Machinist programmer/ MILL must have 5 years of experience!! *The primary function of the Machinist is to operate available machinery to manufacture products that meet or exceed customer specifications.*Principle Duties and...

  • CNC Machinist/Programmer

    5 hours ago

    Houston, United States Voyig Full time

    Job DescriptionOverviewWe are looking for a CNC Machinist / CNC programmer to join its growing facility and team. This person will produce machined parts by programming, setting up, and operating a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. Put your experience and...

  • CNC Programmer

    3 weeks ago

    Houston, United States 1 Resource Group Full time

    Job DescriptionJob Description1 Resource Group is excited to announce a new opportunity for a CNC Programmer to join our clients team. As a CNC Programmer, you will play a key role in programming and operating CNC machines to create high-quality precision parts.Responsibilities include:Consults with Design Engineers during the design phase to foster...

  • CNC Programmer

    4 weeks ago

    Houston, Texas, United States 1 Resource Group Full time

    1 Resource Group is excited to announce a new opportunity for a CNC Programmer to join our clients team. As a CNC Programmer, you will play a key role in programming and operating CNC machines to create high-quality precision parts. Responsibilities include: Consults with Design Engineers during the design phase to foster economically producible and...

  • CNC Operator

    4 weeks ago

    Houston, United States Carlton Staffing Services Full time

    We are looking for experienced, reliable, hard-working employees who can interview immediately! DESCRIPTION OF YOUR DREAM JOB: - Job Title: CNC Operator (Programmer) HAAS Lathe - Location: Houston, TX - Pay: Negotiable - Hours: Monday through Friday 8:00-5:00pm - Duration: Temp to Hire - Description of Duties: Operate controls, load parts, and approve...

  • CNC Programmer

    3 days ago

    Houston, TX, United States LSI Staffing Full time

    *LSI Staffing Houston has an Immediate CNC Mill-Programmer position at our client in NE Houston.**LEAD Machine SHOP!! WEEKLY PAY!**CNC Machinist programmer/ MILL must have 5 years of experience!! *The primary function of the Machinist is to operate available machinery to manufacture products that meet or exceed customer specifications.*Principle Duties and...

  • CNC Programmer

    4 weeks ago

    South Houston, United States Vu Enterprise, Inc Full time

    Job DescriptionJob DescriptionJob Title: CNC ProgrammerDepartment: ProductionReports To: Shop ManagerJob SummaryProduce CNC programs and assist machinist in set up, operation and troubleshooting of parts. Based on need will operate CNC machines and perform maintenance on machinery. General AccountabilitiesDevelops CNC programs using only company provided...

  • CNC Operator

    4 weeks ago

    Houston, United States Carlton Staffing Services Full time

    We are looking for experienced, reliable, hard-working employees who can interview immediately! DESCRIPTION OF YOUR DREAM JOB: - Job Title: CNC Operator (Programmer) Mazak Mill w/ Mazatrol - Location: Houston, TX - Pay: $24-$28 - Hours: Monday through Friday 8:00-5:00pm - Duration: Temp to Hire - Description of Duties: Operate controls, load parts, and...

  • CNC Programmer

    3 weeks ago

    Houston, United States NOV Full time

    JOB DESCRIPTIONNational Oilwell Varco (NOV) is a leading provider of technology, equipment, and services to the global oil and gas industry that supports customers' full-field drilling, completion, and production needs. Since 1862, NOV has pioneered innovations that improve the cost-effectiveness, efficiency, safety, and environmental impact of oil and gas...

  • CNC Programmer

    1 week ago

    Houston, United States Cypress Creek Personnel Full time

    Job DescriptionJob DescriptionValve company seeking Programmer to program from CAD and transfer to HAAS Machines6am-3pm but may work until 5pm depending on workload.  Monday through Friday. Temp to hire. Great Benefits. Location: 249/Beltway 8 

  • CNC Programmer

    2 weeks ago

    Houston, United States GP&C Full time

    Responsibilities:•Create and develop documents for new and existing products from engineering drawings.•Read and interpret blueprints and related technical data to determine tooling requirements, control settings, machining methods, and operational sequences.•Design, create, and implement new CNC Programs to include improvements in tooling, machine...

  • CNC Programmer

    4 weeks ago

    Houston, United States General Plastics & Composites, LP Full time

    **Responsibilities**: - Create and develop documents for new and existing products from engineering drawings. - Read and interpret blueprints and related technical data to determine tooling requirements, control settings, machining methods, and operational sequences. - Design, create, and implement new CNC Programs to include improvements in tooling,...

  • CNC Programmer

    9 hours ago

    Houston, United States GP&C Full time

    Responsibilities: •Create and develop documents for new and existing products from engineering drawings. •Read and interpret blueprints and related technical data to determine tooling requirements, control settings, machining methods, and operational sequences. •Design, create, and implement new CNC Programs to include improvements in tooling, machine...

  • CNC Programmer

    4 hours ago

    Houston, United States GP&C Full time

    Job DescriptionResponsibilities:• Create and develop documents for new and existing products from engineering drawings.• Read and interpret blueprints and related technical data to determine tooling requirements, control settings, machining methods, and operational sequences.• Design, create, and implement new CNC Programs to include improvements in...