![Air Force Materiel Command](https://media.trabajo.org/img/noimg.jpg)
Toolmaker
4 weeks ago
Summary Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position TOOLMAKER WG-3416-11 pot 13, is to fabricate, overhaul, calibrate, and repair tools, jigs, fixtures, and gages used by workers performing machining and assembly work; develop, fabricate, and repair various types of punches and dies for use in metal working press operations; and fabricate and repair molds, and other materials. Responsibilities Fabricate, overhaul, calibrate, and repair tools, jigs, fixtures, and gages used by workers performing machining and assembly work; develops, fabricates, and repairs various types of punches and dies for use in metal working press operations; and fabricates and repairs molds for use in molding and shaping plastics, rubber and other materials. Set up and operate common machine tools and attachments to perform special and precise machining operations by devising and constructing fixtures and holding devices. Use a variety of precision instruments and equipment. Utilize safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment. Requirements Conditions of Employment Qualifications In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C. QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-3400 Machine Tool Work Family.. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time. The screen out element for this position is: Ability To Do The Work Of The Position Without More Than Normal Supervision. JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Operation of machine tools 2. Technical practices (theoretical, precise, artistic) 3. Ability to use shop drawings 4. Measurement and layout 5. Ability to use hand tools for machine shop 6. Knowledge of metals PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.You will receive credit for all qualifying experience, including volunteer experience. PHYSICAL EFFORT: The work requires standing, stooping, bending, and reaching. Frequently handles, lifts, and carries objects weighing up to 40 pounds, and occasionally lifts and moves heavier items with assistance. WORKING CONDITIONS: Work is performed inside in a machine shop environment wherein there is danger to the skin and eyes from flying metal chips, abrasive particles, and hot metal; possibility of skin irritations from contact with coolants, lubricants, and abrasive compounds; and danger to fingers, hands, and other body parts from cutting tools, grinding wheels, rotating pieces, and moving parts of machines. Subjected to dirt and noise of machine shop activities. Education Additional Information Hill Air Force Base provides worldwide engineering and logistics management for the F-16 Fighting Falcon, A-10 Thunderbolt II, and the Minuteman III ICBM, and performs depot maintenance of the F-16, A-10, and C-130 Hercules aircraft. The base is located between Ogden and Salt Lake City. The area is known for year round activities, including skiing, hiking, boating, extreme sports, fishing and hunting, with four distinct seasons, low humidity and moderate snow fall in the valley. Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here. To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location. Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information. 120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur. Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click here to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist. Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click here to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement. Direct Deposit: All federal employees are required to have direct deposit. Incentives: Recruitment and/or retention incentives may or may not be used. If you have questions regarding this announcement and have hearing or speech difficulties click here.
-
Machinery Operations Leader
7 days ago
Hill AFB, United States Air Force Materiel Command Full timePosition OverviewThe Toolmaker Leader plays a crucial role in guiding a team of skilled tradespeople to execute machining and labor tasks effectively. This position requires a blend of leadership and hands-on expertise in the machining field.Key ResponsibilitiesSupervise and coordinate the activities of a team of trades and labor workers.Engage in...
-
Machining Team Supervisor
2 days ago
Hill AFB, United States Air Force Materiel Command Full timePosition OverviewThe Toolmaker Leader role at Air Force Materiel Command is designed for individuals who excel in leading teams of skilled tradespeople and laborers. This position involves overseeing a group of three or more workers to ensure the successful execution of trades and labor tasks on a consistent basis.Key ResponsibilitiesGuide and mentor a team...