Quality Inspector Ii

2 weeks ago

Hudson, United States The Entwistle Company Full time

The Entwistle company is looking for a motivated and self-starter individual to fill an opening for a full-time Inspector. This full-time position is Monday through Friday 7:00am to 3:30pm with a 30-minute lunch.

**SUMMARY**

Set-up and perform a wide variety of mechanical and visual inspections, to close tolerances, on highly diversified and complex parts and/or assemblies. High degree of customer and government representative(s) interfacing.

Willingness to work/train towards becoming an NDT Level III Inspector in VT, MT, and PT should the need arise. These duties would entail the visual inspection, magnetic particle inspection, and/or liquid penetrant inspection of welds and surfaces of finished parts.

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the physical demands, work environment, knowledge, and skills that pertain to this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is conducive of a manufacturing shop environment.

**ESSENTIAL DUTIES AND RESPONSIBILITIES **include, but not limited to, the following. Other duties may be assigned.

Determine inspection set-up and determine inspection methods. Notify manufacturing / assembly when non-conforming conditions are detected. Request corrective action; monitor output to assess effectiveness of corrective action. Complete record of inspection results and originate related inspection reports as prescribed by procedure. Utilize statistical quality control techniques such as X and R charts, machine and process capability analyses, and selection and utilization of appropriate sampling plans. Review data for quality trend evaluation. Notify supervisor when action is needed.

Use a complete range of mechanical inspection equipment such as CMM machine, FARO Arm, Keyence Wide Area CMM, micrometer, height stand, surface plate, thread and plug gauges, hardness tester, optical comparator, gauge blocks and plating thickness gauge. Recommend new or improved inspection equipment and more efficient and economical inspection methods.

Perform final product and assembly inspections and tests.

Perform first piece inspection, when required, for very complicated parts.

Inspect vendor supplied items for purchase order compliance.

Maintain work area neat and orderly.

Observe all health and safety requirements.

Perform other similar and related duties as assigned.

**OUR MISSION STATEMENT**

To be an essential provider of mission-critical defense components & systems, spanning air, land, sea and space, recognized for our specialized capabilities, quality and dependability.

To design, manufacture & build-to-print innovative and cost-effective products.

To help our DoD, Prime and Foreign Military customers and US warfighter succeed in their missions.

**REQUIREMENTS**
- Associate’s Degree or equivalent technical school training
- 5-10 years’ Inspection experience preferred.
- Attention to detail.
- Excellent organization and analytical skills.
- Ability to manage multiple tasks simultaneously.
- Problem solver and ability to take initiative.
- Ability to work in a team environment.

**WHAT WE OFFER**

401k

Paid time off

Employer Paid Life Insurance

Employer Paid Family and Medical Leave

Generous Health Insurance Coverage

Voluntary Dental & Vision Insurance

Pay: From $28.00 per hour

**Benefits**:

- 401(k)
- 401(k) matching
- Dental insurance
- Health insurance
- Life insurance
- Paid time off
- Referral program
- Tuition reimbursement
- Vision insurance

Experience level:

- 5 years

Schedule:

- 8 hour shift

Work setting:

- In-person
- Manufacturing facility

**Experience**:

- Quality control: 5 years (required)
- Steel Manufacturing: 5 years (required)

Ability to Relocate:

- Hudson, MA 01749: Relocate before starting work (required)

Work Location: In person

  • Quality Inspector II

    2 weeks ago

    Hudson, New Hampshire, United States Adecco Full time

    Adecco Staffing is working with a manufacturer in Hudson, NH who is looking to hire an experienced Quality Inspector for 1st shift - This is a temporary position. CMM experience - HIGHLY PREFERRED Job Title: Quality Inspector II Pay Rates: $24.00 to $34.00 per hour depending on experience (CMM experience) Schedule: Monday through Friday - 7AM...

  • Quality Inspector II

    2 weeks ago

    Hudson, New Hampshire, United States Adecco US, Inc. Full time

    Adecco Staffing is working with a manufacturer in Hudson, NH who is looking to hire an experienced Quality Inspector for 1st shift - This is a temporary position.CMM experience - HIGHLY PREFERRED *Job Title:Quality Inspector IIPay Rates:$24.00 to $34.00 per hour depending on experience (CMM experience)Schedule:Monday through Friday - 7AM to 3PMJob...

  • Quality Inspector

    1 month ago

    Hudson, United States Trexon Full time

    Job DescriptionJob DescriptionTo provide quality control and assurance of products to meet specifications and quality requirements.Responsibilities:Responsible for performing in-process and final inspection duties on various types of cable assemblies, harnesses and mechanical assemblies.Inspector will inspect to IPC-620 standards and record results in log on...

  • Quality Control Inspector

    1 week ago

    Hudson, United States Butterfly Recruitment Full time

    Job DescriptionJob DescriptionBecome Part of a Legacy: Join a Trusted Defense Manufacturer!+ Job OverviewA Quality Control Inspector is needed to rigorously uphold our product standards and contribute to our ongoing mission of excellence. This role requires a methodical individual with a keen eye for detail and an unyielding commitment to quality.+ Essential...

  • Quality Control Inspector

    2 weeks ago

    Hudson, United States Butterfly Recruitment Full time

    Job DescriptionJob DescriptionBecome Part of a Legacy: Join a Trusted Defense Manufacturer!+ Job OverviewA Quality Control Inspector is needed to rigorously uphold our product standards and contribute to our ongoing mission of excellence. This role requires a methodical individual with a keen eye for detail and an unyielding commitment to quality.+ Essential...

  • Quality Inspector

    3 weeks ago

    Hudson, United States MRPC Full time

    **_QA Inspector - 2nd Shift Hudson, NH_** : Under the general supervision of the VP or Manager of Quality, the Quality Inspector is responsible to insure that parts being produced meet the specifications and standards provided by our customers. Inspectors will perform routine repetitive inspection activities using predetermined and prescribed methods and...

  • Mechanical Quality Inspector

    4 weeks ago

    Hudson, United States VANTEDGE Full time

    Mechanical Inspector Full-time / Permanent Hourly 2nd Shift *We are not accepting candidates from third party agencies.About Us: Vantedge Medical is the premier metals-based med-tech solutions partner from concept to full-scale manufacturing. We are at the forefront of precision engineering and innovation, specializing in the development and manufacturing of...

  • Mechanical Quality Inspector

    4 weeks ago

    Hudson, United States OMNI Components Corp Full time

    Job DescriptionJob DescriptionMechanical InspectorFull-time / Permanent Hourly 2nd Shift*We are not accepting candidates from third party agencies.About Us:Vantedge Medical is the premier metals-based med-tech solutions partner from concept to full-scale manufacturing. We are at the forefront of precision engineering and innovation, specializing in the...

  • Mechanical Quality Inspector

    4 weeks ago

    Hudson, United States OMNI Components Corp Full time

    Job DescriptionJob DescriptionMechanical InspectorFull-time / Permanent Hourly 2nd Shift (3:00pm - 11:30pm M-F)*We are not accepting candidates from third party agencies.About Us:Vantedge Medical is the premier metals-based med-tech solutions partner from concept to full-scale manufacturing. We are at the forefront of precision engineering and innovation,...

  • Gate Clerk

    3 weeks ago

    Hudson, United States ITS Technologies & Logistics Full time

    Overview We are hiring for Gate Clerk - Inspectors! ConGlobal is HIRING IMMEDIATELY with offers on the spot! Paid Training! No experience necessary! Great Benefits! Competitive Pay! Starting Pay $20.00! Gate Clerk - Inspector Do you like working outdoors? Are you looking for a career in the railroad industry? Are you looking for a career with great...

  • Gate Clerk

    1 month ago

    Hudson, United States ITS ConGlobal Full time

    Overview We are hiring for Gate Clerk - Inspectors! ConGlobal is HIRING IMMEDIATELY  with offers on the spot! Paid Training! No experience necessary! Great Benefits! Competitive Pay! Starting Pay $20.00! Gate Clerk - Inspector Do you like working outdoors? Are you looking for a career in the railroad industry? Are you looking for...

  • Gate Clerk

    3 weeks ago

    Hudson, United States ITS Technology and Logistics, LLC Full time

    Overview We are hiring for Gate Clerk - Inspectors! ConGlobal is HIRING IMMEDIATELY with offers on the spot! Paid Training! No experience necessary! Great Benefits! Competitive Pay! Starting Pay $20.00! Gate Clerk - InspectorDo you like working outdoors? Are you looking for a career in the railroad industry? Are you looking for a career with great...

  • Gate Clerk

    3 weeks ago

    Hudson, United States ITS Technologies & Logistics Full time

    Overview We are hiring for a Part-time Gate Clerk - Inspectors! ConGlobal is HIRING IMMEDIATELY with offers on the spot! Paid Training! No experience necessary! Great Benefits! Competitive Pay! Starting Pay $20.00! Gate Clerk - Inspector Do you like working outdoors? Are you looking for a career in the railroad industry? Are you looking for a career...

  • Gate Clerk

    3 weeks ago

    Hudson, United States ITS Technology and Logistics, LLC Full time

    Overview We are hiring for a Part-time Gate Clerk - Inspectors! ConGlobal is HIRING IMMEDIATELY with offers on the spot! Paid Training! No experience necessary! Great Benefits! Competitive Pay! Starting Pay $20.00! Gate Clerk - InspectorDo you like working outdoors? Are you looking for a career in the railroad industry? Are you looking for a career...

  • Gate Clerk

    3 weeks ago

    Hudson, United States ITS ConGlobal Full time

    OverviewWe are hiring for a Part-time Gate Clerk - Inspectors!ConGlobal is HIRING IMMEDIATELY with offers on the spot!Paid Training! No experience necessary!Great Benefits!Competitive Pay!Starting Pay $20.00!Gate Clerk - InspectorDo you like working outdoors? Are you looking for a career in the railroad industry? Are you looking for a career with great...

  • General Laborer

    2 weeks ago

    Hudson, United States ITS ConGlobal Full time

    Overview We are hiring for a Part-time Gate Clerk - Inspectors! ConGlobal is HIRING IMMEDIATELY  with offers on the spot! Paid Training! No experience necessary! Great Benefits! Competitive Pay! Starting Pay $20.00! Gate Clerk - Inspector Do you like working outdoors? Are you looking for a career in the railroad industry? Are you...

  • Field Roof Inspector

    4 weeks ago

    Hudson, United States Hancock Claims Consultants Technicians Full time

    Hancock Claims Consultants specialize in Ladder Assist and Property Inspection Services, collaborating directly with numerous insurance agencies for efficient claims management. At Hancock, we are at the forefront of claims resolution services, offering nationwide coverage, swift and comprehensive claims inspections, and unparalleled quality and precision....

  • Field Roof Inspector

    1 month ago

    Hudson, United States Hancock Claims Consultants Technicians Full time

    Job DescriptionJob DescriptionHancock Claims Consultants specialize in Ladder Assist and Property Inspection Services, collaborating directly with numerous insurance agencies for efficient claims management.At Hancock, we are at the forefront of claims resolution services, offering nationwide coverage, swift and comprehensive claims inspections, and...

  • Quality Inspector New Hudson B Shift 6pm 6am

    1 month ago

    New Hudson, United States Webasto Roof Systems Inc Full time

    Quality Inspector - New Hudson B Shift (6pm - 6am) Location: New Hudson, MI, US Entry Level: Career Starters (0-3 years) Function: Production & Operations Type of Contract: Permanent Job ID: 31540 Feel the Drive- for us that means making mobility something you can experience with all your senses. We work for more comfort, wind in your hair, the perfect...

  • Quality Engineer

    1 month ago

    Hudson, United States C & M Machine Products, Inc. Full time

    Job DescriptionJob DescriptionThe Quality Engineer is responsible for the identification, analysis and documentation of Quality issues, working with various groups in the organization to find solutions and improvements to product and processes, as it relates to Quality.Essential FunctionsReasonable accommodations may be made to enable individuals with...