See more Collapse

CNC / Mazak Operator 2

2 months ago

Houston, United States Pennsylvania Machine Works Full time

**SUMMARY**

Perform routine and repetitive duties to operate machines for production operations and set up.

**ESSENTIAL DUTIES AND RESPONSIBILITIES **include the following. Other duties may be assigned.

Work from shop prints, work orders, prescribed production procedures to receive stock material, requisition tooling and program to prepare machine for operation.

Check all fluid levels, grease fittings and transmission.

Load programs, insert tooling for touch off of tooling, reference points for dry run of first piece.

Produce first piece with approval or assistance of more experienced personnel for measurement of critical dimensions.

Check production pieces following quality procedures.

Move, lift, carry and place materials in bins and boxes.

Clean work and machine areas.

Change oils and fluids as needed.

Assist other operators to learn machine operations and advance skills to meet expected job performance.

Use data terminal to log jobs and record production data.

Remove and place chips in designated disposal area.

Operate one or more CNC machine, saw and use precision measuring instruments.

Refer questionable conditions to supervisor or appropriate personnel.

Responsible to prepare and submit/record production records, accurate piece counts, reports and forms required by company procedures.

If applicable, when a supplier designated inspector (hardware) is certified by our customer, operator is required to do a minimum of 3 level 1 type orders per calendar quarter to maintain his/her proficiency of certification.

Observe all company policies and regulations including safety, housekeeping and quality of work with support of ISO procedures and standards.

Utilize individually and/or further the use of total quality concepts, tools and techniques to support continuous quality improvement in all processes in which the position participates with a positive "Can Do" attitude.

Support, encourage and maintain a positive team working atmosphere throughout the company.

Perform other duties as requested or necessary to meet business conditions and changes.

**SUPERVISORY RESPONSIBILITIES**:

- N/A

**QUALIFICATIONS **To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.

At a minimum each individual must be trained on the following work instructions:
CW-HR-021-IN (Deliberate Malpractice Prevention)

CW-INSP-200-IN (In Process and Final Inspection for All Manufacturing Departments)

CW-INSP-249-FM (Penn Machine - All Machines Inspection Log)

CW-INSP-249-IN (PMW Codes and Sampling Schedules for Inspection Log)

CW-ID-888-CH (Chips Sorting Chart)

**EDUCATION and/or EXPERIENCE**:
High school diploma or general education degree (GED); or nine to twelve months related experience and/or training; or equivalent combination of education and experience.

**LANGUAGE SKILLS**

Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.

**MATHEMATICAL SKILLS**

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to draw and interpret bar graphs.

**REASONING ABILITY**
- or two-step instructions. Ability to deal with standardized situations with only occasional or no variables.

**CERTIFICATES, LICENSES, REGISTRATIONS**:

- Customer certifications (if applicable).

**PHYSICAL DEMANDS **The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to stand and walk. The employee frequently is required to use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee must regularly lift and/or move up to 40 pounds and occasionally lift and/or move up to 70 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.

**WORK ENVIRONMENT **The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually loud.

4 days on / 4 days off - Night Shift 5:00 PM to 3:30 AM

We have other current jobs related to this field that you can find below

  • CNC Machinist

    3 weeks ago

    Houston, United States TPI Staffing, Inc Full time

    Job DescriptionJob DescriptionTPI Staffing is Hiring for a CNC Operator Mazak 350 with Mazatrol Programming. This is a Temp-to-Hire Position in NW Houston, paying $20 - $27 per hour. Shift hours are 7:30 - 4:30, M-F working additional hours on Saturday and some overtime.Manufacturing valve components for the Petrochemical Industry.Qualifications2+ years CNC...

  • Mazak/ CNC Programmer

    3 months ago

    Houston, United States Allied Group Full time

    Job DescriptionJob DescriptionCNC Operator Job DescriptionResponsibilities:The CNC operator is responsible for the set-up, maintenance, and operation of one or more CNC machines. This includes mills and/or lathes. The Operator must safely operate these machines while adhering to all company procedures and policies.Safety:· Attend weekly safety meeting.·...

  • CNC Machinist Mazak

    4 weeks ago

    Houston, Texas, United States Weldforce Group Full time

    We are needing CNC Machinist for multiple locations in Houston Tx. Call JOB SUMMARY: Responsible for using expert knowledge to operate and control computer numerically controlled (CNC) machines.PRIMARY RESPONSIBILITIES: Under the direction of a supervisor and/or experienced machinist, responsible for quality parts produced on CNC machines.We are needing VTL,...

  • CNC Machinist

    2 months ago

    Houston, United States EnerStaff LLC Full time

    Job DescriptionJob DescriptionCNC Operator (Temp-to-Hire)Location: Houston, TX 77073 (Greenspoint/ Westfield)Pay: $18-$22Shift: 4am-4pm or 4pm-4am 5-6 days/weekKey Responsibilities include:Assist in performing setups.Operate CNC lathe in accordance to operating instructions.Skillfully make necessary adjustment to CNC program or machine control offsets to...

  • CNC Machinist

    3 months ago

    Houston, United States EnerStaff LLC Full time

    Job DescriptionJob DescriptionCNC Operator (Temp-to-Hire)Location: Houston, TX 77073 (Greenspoint/ Westfield)Pay: $18-$22Shift: 4am-4pm or 4pm-4am 5-6 days/weekKey Responsibilities include:Assist in performing setups.Operate CNC lathe in accordance to operating instructions.Skillfully make necessary adjustment to CNC program or machine control offsets to...

  • CNC Machinist

    7 days ago

    Houston, United States EnerStaff LLC Full time

    Job DescriptionJob DescriptionCNC Operator (Temp-to-Hire)Location: Houston, TX 77073 (Greenspoint/ Westfield)Pay: $18-$22Shift: 4pm-4am 5-6 days/weekKey Responsibilities include:Assist in performing setups.Operate CNC lathe in accordance to operating instructions.Skillfully make necessary adjustment to CNC program or machine control offsets to assure...

  • CNC Lathe Machinist

    4 weeks ago

    Houston, United States 1 Resource Group Full time

    Job DescriptionJob Description1 Resource Group is currently seeking a highly skilled CNC Machinist to join our client's team of machinists in South Houston, TX. As a CNC Machinist, you will be responsible for operating and maintaining our CNC machines to produce high-quality machinery parts within the machinery industry. You will work closely with other...

  • CNC Lathe Machinist

    4 weeks ago

    Houston, United States 1 Resource Group Full time

    Job DescriptionJob Description1 Resource Group is currently seeking a highly skilled CNC Machinist to join our client's team of machinists in South Houston, TX. As a CNC Machinist, you will be responsible for operating and maintaining our CNC machines to produce high-quality machinery parts within the machinery industry. You will work closely with other...

  • CNC Machinist

    3 weeks ago

    Houston, United States TPI Staffing, Inc Full time

    Job DescriptionJob DescriptionTPI Staffing is Hiring for Three CNC Machinist . This is a Temp-to-Hire Position in NW Houston, paying $20 - $32 per hour. Shift hours are 7:30 - 4:30, M-F working additional hours on Saturday and some overtime.Mazak 350 with Mazatrol ProgrammingHorizontal Boring Mill Vertical Turret Lathe 36" - 74" Machining and manufacturing...

  • CNC Machinist

    3 weeks ago

    Houston, United States TPI Staffing, Inc Full time

    Job DescriptionJob DescriptionTPI Staffing is Hiring for Three CNC Machinist . This is a Temp-to-Hire Position in NW Houston, paying $20 - $32 per hour. Shift hours are 7:30 - 4:30, M-F working additional hours on Saturday and some overtime.Mazak 350 with Mazatrol ProgrammingHorizontal Boring Mill Vertical Turret Lathe 36" - 74" Machining and manufacturing...

  • Application Engineer Trainee

    3 weeks ago

    Houston, United States Mazak Full time

    Description Mazak Corporation is looking for an Applications Engineer Trainee to join the Applications team at our Southwest Technology Center located in Houston, TX. The ideal candidate will have strong technical/mechanical aptitude and background as well as be willing to work hands-on. They will demonstrate the desire to learn and develop the skills...

  • Machinist - Mazak (Night Shift)-Stabil Drill

    1 month ago

    Houston, United States Superior Energy Full time

    Stabil Drill, A Superior Energy Services Company,is a global company that provides tough, durable tools to support the energy industry in some of the most demanding drilling applications. We have the most talented team of knowledgeable people who work together to deliver on our promise of integrity, strength and innovation.Stabil Drill is currently seeking a...

  • CNC Mechanic

    4 weeks ago

    Houston, United States EnerStaff LLC Full time

    Job DescriptionJob DescriptionCNC MechanicQualificationsDemonstrated experience in electrical and/or electronic and mechanical maintenance including motors, controls, power supplies, AC/DC theory, power distribution, PLC's, hydraulics/pneumatics, lubrication, and power transmissions.Demonstrated ability to follow all established safe work procedures...

  • CNC Mechanic

    2 months ago

    Houston, United States EnerStaff LLC Full time

    Job DescriptionJob DescriptionCNC MechanicQualificationsDemonstrated experience in electrical and/or electronic and mechanical maintenance including motors, controls, power supplies, AC/DC theory, power distribution, PLC's, hydraulics/pneumatics, lubrication, and power transmissions.Demonstrated ability to follow all established safe work procedures...

  • CNC Lathe and Mill Machinist

    3 weeks ago

    Houston, United States interesse international inc. Full time

    Job DescriptionJob DescriptionThe seal products manufacture is seeking to fill the position- CNC Lathe and Mill Machinist in Houston, TX. Title: CNC Lathe & Mill MachinistWork Location: Houston, TX 77086Work Hours: @21:00- 6:00 (2nd NIGHT shift)Report To: Production ManagerHourly Salary: $19.00Start; 8/13/2024-Status: Temp to a Direct Hire (about 3 months...

  • CNC Lathe and Mill Machinist

    3 weeks ago

    Houston, United States interesse international inc. Full time

    Job DescriptionJob DescriptionThe seal products manufacture is seeking to fill the position- CNC Lathe and Mill Machinist in Houston, TX. Title: CNC Lathe & Mill MachinistWork Location: Houston, TX 77086Work Hours: @21:00- 6:00 (2nd NIGHT shift)Report To: Production ManagerHourly Salary: $19.00Start; 8/13/2024-Status: Temp to a Direct Hire (about 3 months...

  • CNC Lathe and Mill Machinist

    1 day ago

    Houston, United States interesse international inc. Full time $20

    Job DescriptionJob DescriptionThe seal products manufacture is seeking to fill the position- CNC Lathe and Mill Machinist in Houston, TX. Title: CNC Lathe & Mill MachinistWork Location: Houston, TX 77086Work Hours: @21:00- 6:00 (2nd NIGHT shift)Report To: Production ManagerHourly Salary: $20.00Start; ASAPStatus: Temp to a Direct Hire (about 3 months for a...

  • CNC Operator

    2 months ago

    Houston, United States Vallourec - North America Full time

    Key Responsibilities include:•Assist in performing setups.•Operate CNC lathe in accordance to VAM USA operating instructions.•Skillfully make necessary adjustment to CNC program or machine control offsets to assure compliance to all dimensions and quality requirements.•Use precision gages, micrometers and other applicable measurement instruments to...

  • CNC Field Service Technician

    1 month ago

    Houston, United States Staffing Agency Full time

    Job DescriptionJob DescriptionCNC Field Service TechnicianQualificationsDemonstrated experience in electrical and/or electronic and mechanical maintenance including motors, controls, power supplies, AC/DC theory, power distribution, PLC's, hydraulics/pneumatics, lubrication, and power transmissions.Demonstrated ability to follow all established safe work...

  • CNC Field Service Technician

    3 weeks ago

    Houston, United States EnerStaff Full time

    CNC Mechanic Pay:$40-$50/ hour Location: Houston, TX 77073 Qualifications Demonstrated experience in electrical and/or electronic and mechanical maintenance including motors, controls, power supplies, AC/DC theory, power distribution, PLC's, hydraulics/pneumatics, lubrication, and power transmissions. Demonstrated ability to follow all established safe work...