Inspector B Day Shift

2 weeks ago

Camarillo, United States Wilwood Engineering Full time

**Wilwood Engineering**, The Leader in Aftermarket High Performance Disc Brake Systems is looking for Inspector B for our Day Shift Team.

**Scope**: Non-Supervisory position - Labor Grade 6

**Summary**: Inspects incoming materials, various machined parts and assemblies for conformance to specifications.

**Essential Duties and Responsibilities**:

- Visually, mechanically and physically inspects various purchased, machined and assembled product against drawings and specifications.
- Interprets documents such as engineering drawings, specifications, test reports and certifications to verify product conformance.
- Uses a wide variety of measuring equipment including micrometers, calipers, bore gages, plug and ring gages, thread gages, optical comparator, hardness tester, and coordinate measuring machine.
- Performs calibration of company and employee owned measuring equipment.
- Completes various documents used for records of product acceptance and maintains the integrity of these records for audit and traceability purposes.
- Assists with purging and screening of defective product when necessary.
- Performs other related duties as assigned by Supervision or Management.
- Responsible for following company policies and safety guidelines.
- Responsible for, and given organizational freedom to report quality deficiencies, recommend solutions, and implement approved corrective and preventative actions.

**Qualification Requirements**:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the education, experience, knowledge, skills and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

**Education and/or Experience**:
High School Diploma or General Education Degree (GED) and 6 months to 2 years related experience, or equivalent combination of education/experience.

**Skills and Abilities**:

- Able to read and understand blueprints, specifications, test reports and manufacturing related documents such as manufacturing routers and equipment manuals.
- Able to add, subtract, multiply and divide whole numbers and decimals.
- Able to carry out instructions, and deal with problems involving concrete variables.
- Able to use micrometers, calipers, comparator and functional and dial gage tools

**Physical Demands**:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; talk or hear. The employee is occasionally required to reach with hands and arms, stoop, kneel, crouch or crawl. The employee must occasionally lift and/or move up to 10 lbs. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and the ability to adjust focus.

Wilwood Engineering is an equal-opportunity employer that is committed to providing all with a work environment free of discrimination and harassment. All qualified applicants will receive consideration for employment without regard to race, color, religion, marital status, national origin, ancestry, sex, sexual orientation, gender identity, disability, medical condition, pregnancy, protected veteran status, age, citizenship, or any other characteristic protected by applicable laws.

Pay: $16.00 - $18.50 per hour

Expected hours: 50 per week

**Benefits**:

- 401(k)
- 401(k) matching
- Dental insurance
- Health insurance
- Paid time off
- Vision insurance

Experience level:

- Under 1 year

Schedule:

- 8 hour shift
- Overtime

Work setting:

- In-person
- Manufacturing facility

Work Location: In person

  • Inspector B

    1 month ago

    Camarillo, United States Wilwood Disc Brakes Full time

    Job Title: Inspector B Scope: Non-Supervisory position Summary: Inspects incoming materials, various machined parts and assemblies for conformance to specifications. Essential Duties and Responsibilities: Visually, mechanically and physically inspects various purchased, machined and assembled product against drawings and specifications. Interprets documents...

  • Inspector B

    4 weeks ago

    Camarillo, United States Wilwood Disc Brakes Full time

    Job Title: Inspector B Scope: Non-Supervisory position Summary: Inspects incoming materials, various machined parts and assemblies for conformance to specifications. Essential Duties and Responsibilities: Visually, mechanically and physically inspects various purchased, machined and assembled product against drawings and specifications. Interprets documents...

  • Inspector B

    1 week ago

    Camarillo, California, United States Wilwood Disc Brakes Full time

    Job Title: Inspector B Scope: Non-Supervisory position Summary: Inspects incoming materials, various machined parts and assemblies for conformance to specificationsEssential Duties and Responsibilities:Visually, mechanically and physically inspects various purchased, machined and assembled product against drawings and specifications.Interprets documents such...

  • Inspector a Night Shift

    2 weeks ago

    Camarillo, United States Wilwood Engineering Full time

    **Wilwood Engineering**, The Leader in Aftermarket High Performance Disc Brake Systems is looking for Inspector A for our Night Shift Team. **Scope**: Non-Supervisory position - Labor Grade 4 **Summary**: Inspects incoming materials, various machined parts and assemblies for conformance to specifications. **Essential Duties and Responsibilities**: -...

  • QC Inspector

    5 days ago

    Camarillo, United States PrideStaff Full time

    QC InspectorA midsize electronics manufacturer is looking for a Quality Control QC Inspector II (level 2). The company provides their products to aerospace, military communication, TV broadcast and NMR. Location: Camarillo, CA Salary: $19.00 - 21.00/hr (DOE) Schedule: Mon-Fri 7.30 am - 4.00 pm with possible overtime This is a full time, temp-to-hire position...

  • Quality Inspector

    1 month ago

    Camarillo, United States Aerotek Full time

    Quality Inspector $17- $18/ hr - 2nd or 3rd shift' Camarillo, CA, US Description: Quality inspector will provide support to the packaging area. Will be responsible for oversight of adherence to cGMPs, FDA and DEA compliance. Reads and understands SOPs, also adheres to cGMPs including good housekeeping, protection of product quality and personal...

  • Quality Inspector Ii

    4 days ago

    Camarillo, United States Eaton Full time

    Eaton’s IS AER ITD division is currently seeking a Quality Inspector II. The hourly rate for this position is $27.00 per hour. The hours for first shift are as follows; 7:00 am - 3:30 pm. **What you’ll do**: **Position Function**: Performs and verifies visual, dimensional, electrical, mechanical, environmental and chemical, inspection functions...

  • Quality Inspector II

    2 weeks ago

    Camarillo, California, United States Eaton Full time

    Eaton's IS AER ITD division is currently seeking a Quality Inspector II.The hourly rate for this position is $27.00 per hour. The hours for first shift are as follows; 7:00 am - 3:30 pm.Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations.What you'll do:Position Function:Performs and verifies...

  • QC Inspector

    2 days ago

    Camarillo, United States Ultimate Staffing Full time

    QC Inspector Needed in Camarillo Industry: Electronics ManufacturingPay Range: $18 - $24/hour DOESchedule: 7:30 am - 4:00pm Monday - Friday (Possible Overtime) Desired skills and experience:· Comfortable working under a microscope for an 8 hour shift· Computer Data Entry Skills· Experience in SMT PCB assembly environment (2-5 years)· Experience in...

  • QC Inspector

    2 days ago

    Camarillo, United States Ultimate Staffing Full time

    QC Inspector Needed in Camarillo Industry: Electronics ManufacturingPay Range: $18 - $24/hour DOESchedule: 7:30 am - 4:00pm Monday - Friday (Possible Overtime) Desired skills and experience:· Comfortable working under a microscope for an 8 hour shift· Computer Data Entry Skills· Experience in SMT PCB assembly environment (2-5 years)· Experience in...

  • Quality Inspector/cmm Programmer and Operator:

    2 weeks ago

    Camarillo, United States GC International, Inc. DBA A. L. Johnson Company Full time

    **Quality Inspector/CMM Programmer**: GC International, Inc. is an AS9100 certified machine shop and foundry supplying aluminum and zinc parts to the medical instrumentation, aerospace, and military industries. Our company offers a wide range of benefits including paid time off, holiday pay, company paid long term disability, company paid life insurance,...

  • Receiving/mechanical Inspector

    2 weeks ago

    Camarillo, United States Kinamed, Inc Full time

    Job Summary: Monday - Friday 7:00am - 3:40pm Occasional overtime during the work week or Saturdays **Responsibilities**: - Perform detailed inspections of mechanical components, assemblies and products to verify compliance with specifications - Utilize precision measuring instruments such as micrometers, calipers, and gauges - Optical measuring systems...

  • F&B Attendant

    4 weeks ago

    Camarillo, United States Lucky Strike Full time

    Overview: Imagine your ideal job. Now add bowling. And arcade games. And parties every day of the week. This isnt any ordinary workplace; its the beginning of a bowled new career as a Food & Beverage Attendant/Runner with Bowlero Corp. Applicants must be at least 18 years of age to qualify for a position. WHAT OUR FOOD & BEVERAGE ATTENDANTS/RUNNERS DO Our...

  • Shift Leader

    3 weeks ago

    Camarillo, United States BLVD BRGR CO Full time

    **Job Summary**: **Responsibilities**: - Oversee daily operations during assigned shifts - Ensure excellent customer service and satisfaction - Supervise staff and provide guidance as needed - Assist in food preparation and service when necessary - Manage POS system for order processing - Support the General Manager in various tasks **Experience**: - Food...

  • Shift Leader>

    2 months ago

    Camarillo, United States Wingstop Full time

    Wingstop - 2508 Las Posas Rd - [Restaurant Shift Manager] As a Shift Leader @ Wingstop, you'll: Be responsible for managing the day-to-day aspects of a Wingstop; Help direct and train Team Members; Assist in goals driven by the GM and AGM; Be at a perfect starting point for those with a management mindset and would like to learn more about Leadership in the...

  • Shift Leader>

    4 weeks ago

    Camarillo, United States Wingstop Full time

    Wingstop - 2508 Las Posas Rd - [Restaurant Shift Manager] As a Shift Leader @ Wingstop, you'll: Be responsible for managing the day-to-day aspects of a Wingstop; Help direct and train Team Members; Assist in goals driven by the GM and AGM; Be at a perfect starting point for those with a management mindset and would like to learn more about Leadership in the...

  • Warehouse Associate

    2 days ago

    Camarillo, United States Aerotek Full time

    **Job Title: Warehouse Associate (Day)** **Job Description** We are seeking a dedicated Warehouse Associate to join our dynamic team. The successful candidate will be responsible for operating both sit-down and stand-up forklifts, using our ERP system, and handling tasks related to packaging and cleaning. Key responsibilities include bringing boxes of...

  • CleanPack Chemist

    3 weeks ago

    Camarillo, United States Clean Harbors Full time

    Clean Harbors in Camarillo, CA is seeking an Environmental Field Chemist Driver Class B (CleanPack Chemist) to handle, segregate, pack, and inspect chemical waste in accordance with Federal/State/Local regulations and our company policies and procedures. This position will work both indoors and outdoors at plants, labs, customer sites and are responsible for...

  • Swing Shift Bike Patrol Security Officer

    2 weeks ago

    Camarillo, United States Securitas Full time

    Swing Shift Bike Patrol Security Officer We help make your world a safer place.  Securitas is a global company that offers the most advanced and sustainable security solutions in the industry. We are located in 47 countries and have 355,000 employees worldwide and over 150,000 clients.  Securitas plays an essential role for our clients and in...

  • CleanPack Chemist

    13 hours ago

    Camarillo, United States Clean Harbors Full time

    Must have Class B w/ hazmat + 5K sign on bonus Tanker to obtain upon hire w/in 6 months $26–$27 10–12 hour days manual labor Occasional overnight travel 1–2 days out of the week Route covers 1–5 stops w/in Ventura, LA, Kern, Santa Barbara, SLO Must be OK w/ general labor– packing haz sites, documentation– computer literacy Working in teams of 2...