Inspector Ii
3 weeks ago
**Inspector II**
**SUMMARY**
Inspector II performs routine inspection work in petroleum and petrochemical terminals and refineries; also performs inspection work on board barges and ships following industry standards and the procedures published by API and Saybolt.
**ESSENTIAL DUTIES AND RESPONSIBILITIES **(Includes the following, other duties may be assigned)
- Perform visual cleanliness inspections of tanks including entering confined spaces
- Verify the accuracy of measurement equipment
- Work safely in the presence of hazardous materials as defined in the appropriate Material Safety Data Sheets
- Take product measurements and samples; accurately and promptly perform related calculations; complete required reports and forms clearly and promptly; perform inventories; do non-petroleum or chemical inspection assignments
- Perform other inspection department duties assigned by the Manager or Scheduler
- Exercise procedural, safety and quality requirements specified in Saybolt procedures manuals, the Global Safety Manual, and Core Laboratories/Saybolt Company policies
- Attend training and pass appropriate examinations in petroleum, chemical and gas inspection procedures, including Right-to-Know training, hazardous materials transportation, and other safety training required by applicable regulations
- Gain knowledge of basic and advanced laboratory procedures through cross training in laboratory
**QUALIFICATION REQUIREMENTS**
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
**EDUCATION AND/OR EXPERIENCE**
- A high school diploma or equivalent (general education degree).
- 3 years as an Inspector or related experience.
- IFIA Certification required.
**SPECIAL KNOWLEDGE, SKILLS AND ABILITIES**
- Exhibit professional appearance and customer service orientation
- Ability to communicate and work productively with multiple stakeholders
- Ability to work independently
**LANGUAGE SKILLS**
Ability to read, and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to other employees of the organization. Ability to communicate written and verbally in English.
**MATHEMATICAL SKILLS**
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, percent, and quantities (linear, volumetric, or weight) and to read and interpolate applicable data and tables.
**REASONING ABILITY**
**CERTIFICATES, LICENSES, REGISTRATIONS**
- Inspectors must have a vehicle in good, safe operating condition that can be used on the job for both personal and sample transportation in all ambient weather conditions. Vehicles used for sample transportation must be able to accommodate the secondary sample containers issued for sample transportation.
- Inspectors are required to maintain the proper levels of automobile liability insurance and meet all state requirements on vehicles used for Saybolt assignments.
- Inspectors must also maintain a valid driver’s license with a satisfactory driving record.
- Local travel and occasional out-of-town assignments are required.
**PHYSICAL DEMANDS**
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with certain disabilities to perform the essential functions when safety is not compromised.
- The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
**WORK ENVIRONMENT**
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions when safety is not compromised.
- While performing the duties of this job, the employee is regularly exposed to fumes or airborne particles. The employee is frequently exposed to toxic or caustic chemicals. The noise level in the work environment is usually moderate
- Core Laboratories, including all of its affiliated and related entities, is an equal opportunity employer and is committed to creating an inclusive environment for everyone. Employment decisions are made regardless of characteristics including, but not limited to, race, color,
-
Quality Inspector II
2 months ago
Orchard Park, United States Path Engineering Full timeRole As a Quality Inspector II (also known as Quality Control Inspector, Quality Assurance Inspector), your primary duties will include performing receiving and in-process inspections on parts and products, working with approved inspection checklists, engineering drawings, and specifications, and utilizing Non-Conforming Material Control process to document...
-
Quality Inspector II
2 weeks ago
Orchard Park, New York, United States Path Engineering Full timeRoleAs a Quality Inspector II (also known as Quality Control Inspector, Quality Assurance Inspector), your primary duties will include performing receiving and in-process inspections on parts and products, working with approved inspection checklists, engineering drawings, and specifications, and utilizing Non-Conforming Material Control process to document...
-
Quality Inspector II
4 weeks ago
Orchard Park, United States Path Engineering Full timeRole As a Quality Inspector II (also known as Quality Control Inspector, Quality Assurance Inspector), your primary duties will include performing receiving and in-process inspections on parts and products, working with approved inspection checklists, engineering drawings, and specifications, and utilizing Non-Conforming Material Control process to document...
-
Ndt Pt Inspector
3 weeks ago
Canoga Park, United States L3Harris Technologies Full time**Aerojet Rocketdyne** is seeking a **NDT PT Inspector - Material Testing Inspector** to join our team in **Canoga Park, California** (Los Angeles area). Union position. In this position, the inspector will be working alongside other LII fluorescent penetrant inspectors until individual certification is attained. (OJT). **Enjoy work/life balance **at our...
-
Inspector II
4 weeks ago
Brooklyn Park, United States Cirtec Medical Full timeJOB SUMMARY This position is primarily responsible for performing receiving, first piece, in-process and final inspection or test on a wide variety of parts and document results. Indicate inspection status, maintain product traceability and non-conforming material control. Participate in internal audits, statistical process control and assist control of...
-
Inspector II
4 weeks ago
Brooklyn Park, United States Cirtec Medical Full timeJOB SUMMARY This position is primarily responsible for performing receiving, first piece, in-process and final inspection or test on a wide variety of parts and document results. Indicate inspection status, maintain product traceability and non-conforming material control. Participate in internal audits, statistical process control and assist control of...
-
Inspector II
1 week ago
Brooklyn Park, Minnesota, United States Cirtec Medical Full timeJOB SUMMARY This position is primarily responsible for performing receiving, first piece, in-process and final inspection or test on a wide variety of parts and document results. Indicate inspection status, maintain product traceability and non-conforming material control. Participate in internal audits, statistical process control and assist control of...
-
Quality Manager
1 month ago
Deer Park, United States Rescar Companies Full timeJob DescriptionJob DescriptionStart your new career today at Rescar! Immediate openings in Deer Park, TX for Quality Assurance Manager!Manages Rescar’s Quality Assurance (QA) program / system to achieve compliance by Rescar Service Center (RSC) personnel. Will ensure that Rescar’s processes are consistent and compliant with Rescar’s Quality System...
-
Quality Manager
4 weeks ago
Deer Park, United States Rescar Companies Full timeJob DescriptionJob DescriptionStart your new career today at Rescar! Immediate openings in Deer Park, TX for Quality Assurance Manager!Manages Rescar’s Quality Assurance (QA) program / system to achieve compliance by Rescar Service Center (RSC) personnel. Will ensure that Rescar’s processes are consistent and compliant with Rescar’s Quality System...
-
Inspector - NACE Coating Montgomery County
4 weeks ago
Takoma Park, United States Alpha Corporation Full timeJob DescriptionJob DescriptionNACE Coatings Inspector Alpha Corporation established in 1979, is a full-service woman-owned firm, providing civil, structural engineering, program and construction management, project controls, and technology services for various building types, transportation, and heavy infrastructure projects. We provide services to a broad...
-
Fire Sprinkler Inspector
2 weeks ago
San Carlos Park, United States DynaFire Inc Full timeThe Fire Sprinkler Service Inspector is responsible for conducting fire sprinkler inspections per NFPA 25 and NFPA 72 for all of DynaFire's clients and national accounts.Responsibilities:Perform fire sprinkler inspections and services to a wide range of clients with various applications of fire protection systems.Schedule inspections with clients.Build and...
-
Investigator II
20 hours ago
Research Triangle Park, United States Biogen Idec Full timeJob Description About This Role This site-based role supports Small Scale manufacturing, primarily during core weekday business hours, but may require off-hours support. The Investigator II is responsible for maximizing organizational learning and improvement from Quality deviations. This team applies systematic and analytical cause analysis techniques in...
-
Investigator II
10 hours ago
Research Triangle Park, United States Biogen Idec Full timeJob Description About This Role This site-based role supports Small Scale manufacturing, primarily during core weekday business hours, but may require off-hours support. The Investigator II is responsible for maximizing organizational learning and improvement from Quality deviations. This team applies systematic and analytical cause analysis techniques in...
-
Supplier Quality Engineer II
1 month ago
Franklin Park, United States Sloan Full timeReq ID: 11067 Sloan is the world’s leading manufacturer of commercial plumbing systems and has been in operation since 1906. We are at the forefront of the green building movement and provide sustainable restroom solutions. We manufacture water-efficient products including flush valves, electronic faucets, soap dispensing and sink systems along with...
-
Supplier Quality Engineer II
4 weeks ago
Franklin Park, United States Sloan Full timeReq ID: 11067 Sloan is the world’s leading manufacturer of commercial plumbing systems and has been in operation since 1906. We are at the forefront of the green building movement and provide sustainable restroom solutions. We manufacture water-efficient products including flush valves, electronic faucets, soap dispensing and sink systems along with...
-
Park Ridge, United States FM Global Full timeResponsibilities FM Global is a leading property insurer of the world's largest businesses, providing more than one-third of FORTUNE 1000-size companies with engineering-based risk management and property insurance solutions. FM Global helps clients maintain continuity in their business operations by drawing upon state-of-the-art loss-prevention engineering...
-
Park Ridge, United States FM Global Gruppe Full timeFM Global is a leading property insurer of the world's largest businesses, providing more than one-third of FORTUNE 1000-size companies with engineering-based risk management and property insurance solutions. FM Global helps clients maintain continuity in their business operations by drawing upon state-of-the-art loss-prevention engineering and research;...
-
Park Ridge, United States FM Global Full timeResponsibilities FM Global is a leading property insurer of the world's largest businesses, providing more than one-third of FORTUNE 1000-size companies with engineering-based risk management and property insurance solutions. FM Global helps clients maintain continuity in their business operations by drawing upon state-of-the-art loss-prevention engineering...
-
Park Ridge, United States FM Global Full timeFM Global is a leading property insurer of the world's largest businesses, providing more than one-third of FORTUNE 1000-size companies with engineering-based risk management and property insurance solutions. FM Global helps clients maintain continuity in their business operations by drawing upon state-of-the-art loss-prevention engineering and research;...
-
Park Ridge, United States FM Global Full timeFM Global is a leading property insurer of the world's largest businesses, providing more than one-third of FORTUNE 1000-size companies with engineering-based risk management and property insurance solutions. FM Global helps clients maintain continuity in their business operations by drawing upon state-of-the-art loss-prevention engineering and research;...
