CNC Process Engineer M/F

2 weeks ago

Santa Maria, California, United States AEROCONTACT Full time


• Perform technical analysis on materials for the CNC process across all products/programs that demonstrates production constraints and recognize opportunities.

• Evaluate the current state of industrial capacity and capability relative to material requirements & propose changes to program plans to ensure that production cost, quality and delivery objectives can be met.

• Work with manufacturing leaders to establish process documents and use materials for the CNC process specification.

• Create and update materials and process standards/specifications to support engineering and manufacturing practices, including establishing certification and recertification criteria.

• Innovate and evaluate new materials for use in the CNC process.

• Review, approve and document usage of material specification, cabin and industrial standards for the CNC process.

• Implement best practices related to the CNC process; ensure standardization, and develop related documentation and training.

• Travel to other Safran sites with similar processes to learn, document, and deploy best practices internally.

• Develop and implement next generation processes, prepare advance technology, and transition from manual processes towards automation when applicable.

• Measure performance across products/programs in these processes and work with Production staff to address and solve problems.

• Train Production staff on new CNC processes.

• Serve as the Safran Cabin site expert for the CNC process, with the willingness to join the Safran Expert network as a CNC Expert.

• Act as the focal for Industrialization on the CNC process as required during the development of our products ensuring that the best practices, materials, and processes are used in our designs.

• Champion and implement Lean principles to improve process performance and capability.

• Lead and participate in Kaizen and workshop events to develop improvement plans.

• Identify, evaluate, and mitigate risks and possible failures within the CNC process.

• Training and Compliance: Conduct training programs to educate production staff on established and new CNC processes, safety protocols, and best practices, ensuring compliance with industry regulations and internal standards.

• Root Cause Analysis: Investigate and resolve process-related issues or failures, utilizing root cause analysis techniques to determine and implement effective corrective and preventive actions.

• Collaboration and Communication: Collaborate closely with cross-functional teams, including design, quality, and paint departments, to coordinate process integration, resolve issues, and communicate process changes or improvements.
Education: BS in Industrial, Aeronautical, Mechanical Engineering or Manufacturing Engineering
Experience: Minimum 7 years' experience with the CNC process
Computer Skills: Basic knowledge of Microsoft Office (Word, Excel, PowerPoint, Outlook)
Other Skills:

• Effective communication skills, both written and verbal.

• Ability to establish collaborative relationships to achieve objectives.

• Ability to work independently and follow through on assignments with limited direction; ability to work within and lead in a team-oriented environment.

• Excellent attention to detail.

• Project management experience.

• Experience in manufacturing process set-up or adaptation.

• Experience in problem solving and risk management.

Additional Preferred Qualifications/Skills: (not required)

• MS degree in Materials or Industrial Processes.

• Structured problem solving (QRQC, 8D, etc.).

• Lean Sigma (DMAIC).

• Experience with Industrialization processes, PFMEA or DFMEA, and Continuous Improvement Tools.

#J-18808-Ljbffr

  • Bonding Process Engineer M/F

    3 weeks ago

    Santa Maria, California, United States Safran Full time

    Bonding Process Engineer M/FCompany : Safran CabinJob field : Industrial EngineeringLocation : Santa Maria , California , United StatesContract type : PermanentContract duration : Full-timeRequired degree : Bachelor's DegreeRequired experience : More than 5 yearsProfessional status : Employees / StaffSpoken language(s) :English FluentSalary range : $68,640 -...

  • Production Engineer 2 M/F

    1 week ago

    Santa Maria, California, United States AEROCONTACT Full time

    Safran est un groupe international de haute technologie operant dans les domaines de l'aeronautique (propulsion, equipements et interieurs), de l'espace et de la defense. Sa mission : contribuer durablement à un monde plus sûr, où le transport aerien devient toujours plus respectueux de l'environnement, plus confortable et plus accessible. Implante sur...

  • Production Engineer 2 M/F

    1 day ago

    Santa Maria, California, United States AEROCONTACT Full time

    Safran est un groupe international de haute technologie operant dans les domaines de l'aeronautique (propulsion, equipements et interieurs), de l'espace et de la defense. Sa mission : contribuer durablement un monde plus sr, o le transport aerien devient toujours plus respectueux de l'environnement, plus confortable et plus accessible. Implante sur tous les...

  • Production Engineer 2 M/F

    3 weeks ago

    Santa Maria, California, United States AEROCONTACT Full time

    Production Engineer 2 M/F (H/F) SAFRAN CABINSanta Maria - Etats-Unis (région non définie)CDISafran est un groupe international de haute technologie opérant dans les domaines de l'aéronautique (propulsion, équipements et intérieurs), de l'espace et de la défense. Sa mission : contribuer durablement à un monde plus sûr, où le transport aérien...

  • Production Engineer 2 M/F

    1 week ago

    Santa Maria, California, United States AEROCONTACT Full time

    Production Engineer 2 M/F (H/F) SAFRAN CABIN Santa Maria - Etats-Unis (rgion non dfinie) CDI Safran est un groupe international de haute technologie oprant dans les domaines de l'aronautique (propulsion, quipements et intrieurs), de l'espace et de la dfense. Sa mission : contribuer durablement un monde plus sr, o le transport arien devient toujours plus...

  • Preparation Process Engineer M/F

    3 weeks ago

    Santa Maria, California, United States AEROCONTACT Full time

    Responsibilities:Perform technical analysis on materials for the Composites Preparation processes that demonstrate production constraints and recognize opportunities.Evaluate the current state of industrial capacity and capability relative to material requirements and propose changes to program plans to ensure that production cost, quality, and delivery...

  • Preparation Process Engineer M/F

    3 weeks ago

    Santa Maria, California, United States AEROCONTACT Full time

    Responsibilities:Perform technical analysis on materials for the Composites Preparation processes that demonstrate production constraints and recognize opportunities.Evaluate the current state of industrial capacity and capability relative to material requirements & propose changes to program plans to ensure that production cost, quality, and delivery...

  • Bonding Process Engineer M/F

    3 weeks ago

    Santa Maria, California, United States AEROCONTACT Full time

    Responsibilities:Perform technical analysis on materials for the Bonding process that demonstrates production constraints and recognize opportunities.Evaluate the current state of industrial capacity and capability relative to material requirements and propose changes to program plans to ensure that production cost, quality, and delivery objectives can be...

  • Production Engineer 3 M/F

    3 weeks ago

    Santa Maria, California, United States AEROCONTACT Full time

    Responsibilities:Ensure Cabin and Divisional industrialization standards are followed throughout the lifecycle of the program.Anticipate and take account of difficulties encountered, act as interface with production engineering methods and process methods, and propose the necessary improvements.Support production workshops and teams on improvement topics and...

  • Senior Training Engineer M/F

    3 weeks ago

    Santa Maria, California, United States AEROCONTACT Full time

    Responsibilities:Defines, implements and validates the development of training plans at a site level.Manages and leads training initiatives.Design and implement internal training to address identified gaps as necessary.Research and evaluate effectiveness of training options and determine appropriate internal or external training solutions and adjust strategy...

  • CNC Engineer Leader

    2 days ago

    Santa Ana, California, United States Actalent Full time

    Aerospace Production Leadership RoleWe are seeking an experienced Manufacturing Engineer to lead our aerospace production team. The successful candidate will have a strong background in CNC machining, process improvement, and team leadership.Key ResponsibilitiesLead the production team in optimizing manufacturing processes.Develop and implement new...

  • CNC Machinist

    1 week ago

    Santa Clarita, California, United States Jobot Full time

    We are a global manufacturing company looking for a 2nd shift Lathe Set-up Machinist to join our growing team This Jobot Consulting Job is hosted by: Ryan Rubino Salary: $28 - $32 per hour We are a global manufacturing company looking for a 2nd shift Lathe Set-up Machinist to join our growing team Our organization is seeking a highly skilled,...

  • Forklift Operators

    2 days ago

    Santa Maria, California, United States Oak Harbor Freight Lines Part time

    Forklift Operators / Dock Workers / Part Time, M-F, 6am-10am Santa Maria, CA, USA Req #1175 Monday, June 3, 2024 Join the Oak Harbor Freight Lines family, where success and tradition meet in a regional trucking story spanning over a century. With 107 years and counting of dedicated service across Washington, Oregon, Idaho, Nevada, Utah, Arizona, and...

  • CNC Machinist Fabricator

    7 days ago

    Santa Clara, California, United States Volt Full time

    At Volt, we're looking for a skilled CNC Machinist to join our team. As a CNC Machinist, you will be responsible for programming, setting up, and operating CNC machines, manual machinery, and tools to fabricate prototype parts from design specifications.The ideal candidate will have experience with CNC machining processes, including milling, turning, and...

  • CNC Prototype Machinist

    4 hours ago

    Santa Cruz, California, United States Joby Aviation Full time

    Overview Joby Aviation is seeking an experienced CNC Prototype Machinist to join our subtractive prototyping team. This individual's role is to setup, operate, program, make fixtures, jigs, test articles, and flight components while collaborating with engineers and other technicians through hands-on experience. You will be responsible for the...

  • Engineering Process Optimization Expert

    2 days ago

    Santa Ana, California, United States Actalent Full time

    Actalent Aerospace Production Job DescriptionWe are Actalent, a global leader in engineering and sciences services. We are seeking an experienced Manufacturing Engineer to join our aerospace production team. As a leader, you will optimize manufacturing processes, collaborate with the team, and analyze data to drive business success.Main ResponsibilitiesLead...

  • CNC Lathe Machinist

    3 weeks ago

    Santa Clarita, California, United States Jobot Full time

    We are a global manufacturing company looking for a 2nd shift Lathe Set-up Machinist to join our growing teamThis Jobot Consulting Job is hosted by: Ryan RubinoAre you a fit? Easy Apply now by clicking the "Apply" buttonand sending us your resume.Salary: $28 - $32 per hourA bit about us:We are a global manufacturing company looking for a 2nd shift Lathe...

  • CNC Mill Machinist

    3 weeks ago

    Santa Clarita, California, United States Jobot Full time

    We are a global manufacturing company looking to hire a CNC Mill machinist to join our growing teamThis Jobot Consulting Job is hosted by: Ryan RubinoAre you a fit? Easy Apply now by clicking the "Apply" buttonand sending us your resume.Salary: $28 - $32 per hourA bit about us:We are a global manufacturing company looking to hire a CNC Mill machinist to join...

  • CNC Programmer Specialist

    6 days ago

    Santa Ana, California, United States Euler Products, Inc. Full time

    We are seeking a skilled CNC Programmer to join our team in Orange County. The ideal candidate will have experience working with wood, a strong mechanical background and proficiency in programming CNC machines to produce high-quality parts.This role is crucial for ensuring precision and efficiency in our manufacturing processes. The CNC Programmer will work...

  • CNC Prototype Machinist

    1 day ago

    Santa Cruz, California, United States Joby Aviation Full time

    Joby OverviewLocated in Northern California, the team at Joby Aviation is driven by our goal of creating an affordable, all-electric air transportation system. Imagine a piloted air taxi that takes off vertically, then quietly carries you and your fellow passengers over the congested city streets below, enabling you to spend more time with the people and...