Maintenance Mechanic
2 days ago
Responsibilities
- Initiate line/equipment tooling requirements in support of new products.
- Understand pneumatic and hydraulic systems in the plant.
- Install, check, adjust, and repair machinery, conveyors, and miscellaneous equipment.
- Develop skills to meet required change-over standards.
- Complete set-up of all filling and assembly equipment.
- Maintain material usage to keep scrap levels at or below allowable standards.
- Change and adjust process equipment such as filling heads, capper torque check weighers, labelers, pumps, and ancillary equipment.
- Load components into hoppers or bins during initial startup and assist line service if required.
- Respond to job assignments plant-wide.
- Inspect and make repairs to maintain preventive maintenance programs.
- Maintain records such as major maintenance, PM, IQOQPQ.
- Operate all shop equipment except the CNC.
- Make adjustments/repairs in electrical panels as defined in electrical Safe Practices for Mechanics.
- Comply with company policy regarding GMP, good housekeeping, and all safety regulations.
- High school diploma or GED
- 3 - 5 years of experience
- Ability to read and work from detailed blueprints and schematics
- Good knowledge of plant equipment and systems
- Basic applicable computer skills
- Minimum score of 46.64 on the Standard Timing Model Test
- Ability to train other Tech Levels and Tech Level A employees
- Operate power shop tools and common hand tools safely and effectively
- Provide hand tools as required
- Ability to lift and carry up to 50 pounds and manipulate bulk drums weighing up to 400 pounds
- Push and pull objects weighing up to 50 lbs
- Stand and/or walk 90% of an 8-hour day, including climbing ladders or steps
- Meet vision and hearing requirements
- Hydraulics
- Pneumatics
- Motors
- Mechanical repair
- HVAC
- Presses
- Metering
- Industrial and heavy equipment
Work Environment Climate-controlled, very clean, and highly automated facility. Work hours during training will be 40 hours per week, transitioning to 50-60 hours per week post-training, usually over 5 days. Shifts include first shift (6:45 AM - 3:30 PM), second shift (2:45 PM - 11:15 PM), and third shift (10:45 PM - 7:15 AM).
Job Type & Location This is a Contract to permanent Hire position based out of Oxford, North Carolina.
Pay and Benefits The pay range for this position is $26.00 - $33.00
Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following:
•Medical, dental & vision
•Critical Illness, Accident, and Hospital
•401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available
•Life Insurance (Voluntary Life & AD&D for the employee and dependents)
•Short and long-term disability
•Health Spending Account (HSA)
•Transportation benefits
•Employee Assistance Program
•Time Off/Leave (PTO, Vacation or Sick Leave)
Workplace Type This is a fully onsite position in Oxford,NC.
Application Deadline This position will be accepting applications until Jan 30, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Aerotek
-
Mechanical Maintenance Technician
2 days ago
Oxford, NC, United States Aerotek Full timeJob Title: Mechanical Maintenance Technician Job Description The Technician is tasked with maintaining the condition of the manufacturing equipment. This includes repairing and/or replacing failed components and performing preventative maintenance measures when applicable. The technician will also develop short and/or long-term repairs aimed at improving...
-
Maintenance Mechanic
16 hours ago
Oxford, NC, United States Saint Gobain Full timePourquoi a-t-on besoin de vous ? PRIMARY OBJECTIVE: This position is for the new, state-of-the-art fiber glass matting plant in Oxford, NC! This position is responsible for preventative maintenance tasks on industrial machinery, maintain industrial equipment as necessary. Trouble shoot machine break down and repair situations and safely restore the...
-
Maintenance Mechanic
2 days ago
Statesville, NC, United States Leggett & Platt Incorporated Full timeThe Leggett & Platt Flooring division, located in Statesville, NC is searching for Maintenance Mechanic. The Maintenance Mechanic will help successfully implement designs and build parts/machines to improve current processes in the production of carp Maintenance Mechanic, Mechanic, Maintenance Supervisor, Maintenance, Automotive Leggett & Platt Incorporated
-
Maintenance Mechanic
2 days ago
Raleigh, NC, United States Pactiv Evergreen, Inc. Full timeMaintain equipment to meet safety, quality, and production goals. Diagnose problems, replace or repair parts, and make adjustments. Work on pneumatic and hydraulic systems. Work on gear boxes, bearings, belts, chains, rollers, pumps. Read and interpr Maintenance Mechanic, Maintenance, Mechanic, Maintenance Associate, Mechanical, Manufacturing, Automotive,...
-
Maintenance Mechanic
2 days ago
Charlotte, NC, United States Menzies Aviation, plc Full timeThis job is on site at Charlotte International Airport We are looking for an applicant with 3-8 years' experience as a mechanic in oil and gas, military, or industrial setting such as manufacturing Pay: $28.00/hour - $33/hour - Pay will be commensura Maintenance Mechanic, Maintenance, Mechanic, Mechanical, Automotive, Airline, Health Menzies Aviation,...
-
Maintenance Mechanic
16 hours ago
Lexington, NC, United States Nucor Full timeJob Details Division: Nucor Steel Lexington Location: Lexington, NC, United States Other Available Locations: N/A Short Description Who is Nucor? A Fortune 500 Industry Leader- We are the largest and most diversified steel and steel products company in the United States, producing everything from raw materials, steel, and industrial gasses to...
-
Industrial Maintenance Mechanic
16 hours ago
Oxford, GA, United States 84 Lumber Full time84 Lumber - JobID: 16377 [Maintenance Mechanic] As an Industrial Maintenance Worker at 84 Lumber, you'll: Assist in maintaining, troubleshooting, and repairing industrial machinery and equipment, ensuring the smooth operation of the facility; Perform regularly scheduled maintenance of all equipment/machinery; Maintain equipment/machinery within tolerance...
-
Maintenance Mechanic A
10 hours ago
Butner, NC, United States ADUSA Distribution Full timeADUSA Distribution is the distribution company of Ahold Delhaize USA, providing distribution services to one of the largest grocery retail supply chains in the nation. ADUSA Distribution fosters a culture that inspires and empowers our associates to always deliver exceptional service and value. Our team is supporting the supply chain network evolution to an...
-
Maintenance Mechanic
16 hours ago
Clayton, NC, United States Dunkin' Full timeDescription Maintenance Mechanic Reports to: Plant Manager Scope The Maintenance Mechanic is responsible to keep all of the equipment and the facility in working order. The Maintenance Mechanic must keep current with all preventative maintenance, maintain a spare parts level, perform repairs as needed and work with equipment service representatives as...
-
Maintenance Mechanic
2 days ago
Cofield, NC, United States Perdue Farms Full timePerdue AgriBusiness is part of Perdue Farms, a family-owned company heading into it's second century of growth and innovation. An international agricultural products and services company, we handle agricultural commodities and have a diverse portfolio of products and businesses. Summary Perdue AgriBusiness has an exciting opportunity for a Maintenance...
-
Maintenance Mechanic
2 days ago
Oxford, United States Saint Gobain Full timePourquoi a-t-on besoin de vous ?PRIMARY OBJECTIVE: This position is for the new, state-of-the-art fiber glass matting plant in Oxford, NC! This position is responsible for preventative maintenance tasks on industrial machinery, maintain industrial equipment as necessary. Trouble shoot machine break down and repair situations and safely restore the machine...
-
Mechanical/Electrical Maintenance Mechanic
13 hours ago
Monroe, NC, United States C S R Full timeElectrical maintenance mechanic needed with plastics experience in a manufacturing environment. Qualified individual must be willing to work 12 hr shifts and /or be flexible with work days.. Person will be helping to set up and maintain injection molding machinery. May be doing assembly on heavy hydraulic equipment. Pay depends on experience....
-
Maintenance Mechanic
2 days ago
Charlotte, NC, United States US Foods Full timeARE YOU A CURRENT US FOODS EMPLOYEE? PLEASE APPLY DIRECTLY THROUGH OUR INTERNAL WORKDAY CAREER SITE Join Our Community of Food People! BASIC PURPOSE Responsible for upkeep and maintenance of warehouse-related equipment (i.e. pallet jacks, highlifts, forklifts, batteries, etc). This keeps day and night warehouse operations functional to ensure efficient...
-
Maintenance Mechanic II
2 days ago
Durham, NC, United States United Therapeutics Corporation Full timeCalifornia, US residents click here. The job details are as follows:What We Do. We build on the strength of our research and development expertise and a distinctive, entrepreneurial culture that encourages diversity, innovation, creativity, sustainab Maintenance Mechanic, Maintenance, Mechanic, Monitoring, Equipment, Systems, Automotive United Therapeutics...
-
Maintenance Mechanic A
1 day ago
Mount Airy, NC, United States Carpenter Co. Full timeDo you want to be part of a team that aspires to improve the quality of life for others? Are you interested in efficient manufacturing processes that promote sustainability? Do you feel a sense of accomplishment in a job well done? At Carpenter Co., we challenge our employees to learn from and inspire one another - all levels of the company collaborate,...
-
Maintenance Mechanic Specialist
4 hours ago
Gastonia, NC, United States Daimler Trucks North America Full timePosition Summary:Daimler Trucks North America is seeking a skilled Tradesperson to join our team as a Maintenance Mechanic. As a key member of our manufacturing facility, you will provide technical support for the production process.Key Responsibilities:Maintain and repair manufacturing equipment and facilities to ensure optimal performance and...
-
Maintenance Mechanic
12 hours ago
Chapel Hill, NC, United States Government Jobs Full timeGovernment Jobs - Full Time - $44,969.00 - $59,578.00 Annually Summary If you're passionate about fostering inclusive communities where everyone has access to affordable housing and opportunities to thrive, the Town of Chapel Hill is excited to invite you to consider the role of Maintenance Mechanic supporting the Affordable Housing and Community...
-
Maintenance Mechanic
13 hours ago
Charlotte, NC, United States Frito-Lay Full timeCountry: United States of America State: North Carolina City: Charlotte Zip Code: 28273 Job Category: Maintenance Mechanic Req ID: 466382 Is Full Time?: Yes Employment Type: Employee Pay Rate: $36 - $41.67 / hour Work Schedule: 3rd shift, Wednesday-Friday w/ Every Other Saturday, 12-hour shifts Job Description Sign On Bonus...
-
Mechanical Maintenance Technician
2 days ago
Whitakers, NC, United States Manpower Engineering Full timeOur client in the manufacturing industry is seeking Mechanical Maintenance Technicians to join their team. As a Mechanical Maintenance Technician, you will be part of the maintenance department supporting the production operation. The ideal candidate will have strong problem-solving skills, a proven track record of working in a team environment, and the...
-
Mechanical Maintenance Technician
16 hours ago
Fletcher, NC, United States Wilsonart Full timeDescription Position at Wilsonart JOB SUMMARY Perform all mechanical maintenance, preventive maintenance and monitor the operations of equipment in the facility under the direction of the Maintenance Supervisor and Crew Foreman. Perform other tasks as required. ESSENTAIL DUTIES AND RESPONSIBILITIES Perform mechanical repairs on equipment breakdowns...