Lead, Electrical Engineer-Avionics Product Hardware
4 weeks ago
Job Title: Lead, Electrical Engineer-Avionics Product Hardware
Job Code: 18001
Job Location: St Petersburg, FL, or Grand Rapids, MI
Schedule: 9/80 alt with every other Friday off
Job Description:
The Lead Product Hardware Engineer is the engineering focal and owner for sustainment of all Technical Aspects of the Recorders Product Line. The Product HW Engineer provides technical leadership to engineering team members that are also supporting the product line. He/She owns technical decision-making process for the product, enabling the team to make decisions in a rapid and successful manner. Product HW Engineer is responsible for engaging other engineering participants with discipline specific backgrounds to resolve issues and provide a unified engineering response. The engineer is a key participant representing engineering for the product line in all major Product Improvements and Design Changes, with a focus on continuity for the product’s technical strategy. Product HW Engineer will act as the primary product line engineering point of contact for Program Management Office, Quality, Factory Operations, Supply Chain (Procurement), Repair & Overhaul and Customer Support. The individual will ensure technical, schedule and cost targets are met.
Essential Functions:
- Review parts obsolescence and find replacement parts, including full evaluation of replacement to determine the scope of work involved with implementing the replacement
- Responsible for writing or contributing to generation of Hardware Change Impact Analysis (HCIA) for proposed part changes
- Lead robust Root Cause Failure Investigations including generation of 9S reports
- Experience designing or troubleshooting high reliability electronics
- Good understanding of product development lifecycle processes
- Knowledge of engineering design standards for commercial aviation industry
- Experience with troubleshooting Test Software, RF Test Equipment, RF circuitry, power supplies, digital circuits, embedded software, and mechanical assemblies
- Exhibit good leadership skills and have the ability to coach teammates on technical issues
- Experience working in a Continuous Improvement Culture with LEAN engineering practices
- Ability to work in a teaming environment, while possessing good interpersonal and communications skills
- Self-motivated to identify performance issues and provide potential solutions through strong organizational, analytical and problem-solving skills
Qualifications:
- Bachelor’s Degree and minimum 10 years of prior relevant experience. Graduate Degree and a minimum of 8 years of prior related experience.
- Must be a US CItizen or Green Card holder
Preferred Additional Skills:
- Partner with the Program Manager to ensure the success of the program technical, schedule and cost targets properly defined and met.
- Constantly engage with cross-functional leaders, defending the program's needs and priorities
- Provide engineering technical support for Operations to help ensure the correct Production Processes and Acceptance Testing of the Product occurs.
- Engineering Technical support for Supplier Quality and Supply Chain to help ensure that the correct technical decisions are being made for non-conformances, part substitutions and supplier manufacturing alterations.
- Engineering Technical support for Customer Support to help customers with technical issues and questions related to the Product.
- Support Operations, Quality and Return & Overhaul in analyzing issue reports (for example: DFM, DFT and/or yield), to identify systemic design or test issues.
- Initiate continuous improvements that involve engineering and factory working together to improve efficiency and quality.
- Ensure that any potential certification compliance issues are escalated and coordinated with Engineering Management.
- Maintain historical understanding of the Product's configurations (hardware, software and test)
#LI-JV1
-
Grand Rapids, United States L3Harris Technologies Full timeJob Title: Lead, Electrical Engineer-Avionics Product HardwareJob Code: 18001Job Location: St Petersburg, FL, or Grand Rapids, MISchedule: 9/80 alt with every other Friday off Job Description: The Lead Product Hardware Engineer is the engineering focal and owner for sustainment of all Technical Aspects of the Recorders Product Line. The Product HW...
-
Grand Rapids, United States L3Harris Technologies Full timeJob Title: Lead, Electrical Engineer-Avionics Product HardwareJob Code: 18001Job Location: St Petersburg, FL, or Grand Rapids, MISchedule: 9/80 alt with every other Friday off Job Description: The Lead Product Hardware Engineer is the engineering focal and owner for sustainment of all Technical Aspects of the Recorders Product Line. The Product HW...
-
Grand Rapids, United States L3Harris Technologies Full timeJob Title: Lead, Electrical Engineer-Avionics Product HardwareJob Code: 18001Job Location: St Petersburg, FL, or Grand Rapids, MISchedule: 9/80 alt with every other Friday off Job Description: The Lead Product Hardware Engineer is the engineering focal and owner for sustainment of all Technical Aspects of the Recorders Product Line. The Product HW...
-
Sr. Associate, Electrical Engineering-Avionics
2 weeks ago
Grand Rapids, MI, United States L3Harris Technologies Full timeJob Title: Sr. Associate, Electrical Engineering-Avionics Job Code: 15730 Job Location: Grand Rapids MI or St Petersburg FL (relocation available for those that qualify) Schedule: 9/80 reg (every other Friday off) Job Description: As an avionics electrical engineer, you are focused on designing and documenting electrical circuit card assemblies. The...
-
Lead Avionics Engineer
4 weeks ago
Los Angeles, CA, United States Hermeus Full timeLos Angeles, CA / Atlanta, GA / Los Angeles, CAEngineering – Avionics Hardware /Full-time /On-siteHermeus is an aerospace and defense technology company founded to radically accelerate air travel by delivering hypersonic aircraft. The company aims to develop hypersonic aircraft quickly and cost-effectively by integrating hardware-rich, iterative...
-
Lead Avionics Engineer
3 days ago
Los Angeles, CA, United States Hermeus Full timeLos Angeles, CA / Atlanta, GA / Los Angeles, CAEngineering – Avionics Hardware /Full-time /On-siteHermeus is an aerospace and defense technology company founded to radically accelerate air travel by delivering hypersonic aircraft. The company aims to develop hypersonic aircraft quickly and cost-effectively by integrating hardware-rich, iterative...
-
Lead Electrical Engineer
3 weeks ago
Grand Rapids, United States L3Harris Technologies Full timeJob Title: Lead, Electrical Engineer-Avionics Product HardwareJob Code: 18001Job Location: St Petersburg, FL, or Grand Rapids, MISchedule: 9/80 alt with every other Friday offJob Description:The Lead Product Hardware Engineer is the engineering focal and owner for sustainment of all Technical Aspects of the Recorders Product Line. The Product HW Engineer...
-
Lead Electrical Engineer
3 weeks ago
Grand Rapids, United States L3Harris Technologies Full timeJob Title: Lead, Electrical Engineer-Avionics Product Hardware Job Code: 18001 Job Location: St Petersburg, FL, or Grand Rapids, MI Schedule: 9/80 alt with every other Friday offJob Description: The Lead Product Hardware Engineer is the engineering focal and owner for sustainment of all Technical Aspects of the Recorders Product Line. The Product HW...
-
Senior Avionics Electrical Engineer
4 weeks ago
Los Angeles, CA, United States Hermeus Full timeAtlanta, GA / Los Angeles, CAEngineering – Avionics Hardware /Full-time /On-siteHermeus is an aerospace and defense technology company founded to radically accelerate air travel by delivering hypersonic aircraft. The company aims to develop hypersonic aircraft quickly and cost-effectively by integrating hardware-rich, iterative development with modern...
-
Principal Avionics Electrical Engineer
3 days ago
Los Angeles, CA, United States Hermeus Full timeLos Angeles, CA / Atlanta, GAEngineering – Avionics Hardware /Full-time /On-siteHermeus is an aerospace and defense technology company founded to radically accelerate air travel by delivering hypersonic aircraft. The company aims to develop hypersonic aircraft quickly and cost-effectively by integrating hardware-rich, iterative development with modern...
-
Senior Avionics Electrical Engineer
1 week ago
Los Angeles, CA, United States Source Group International Full timeJob Title: Senior Avionics Electrical EngineerLocation: Los Angeles Reports to: Manager/Director of Electrical EngineeringJob Type: Full-TimeJob Overview:We are seeking a highly experienced and motivated Senior Avionics Electrical Engineer to join our client based in Los Angeles. This role involves designing, testing, and integrating electrical systems for...
-
Test Equipment Engineer
2 days ago
Grand Rapids, Michigan, United States Saige Partners Full timeWe are seeking a highly skilled Lead Test Systems Design Engineer - Avionics to join our team at Saige Partners. As a key member of our engineering group, you will be responsible for designing and developing automated test systems (ATEs) and test programs for design verification and production testing of electronic avionics assemblies.Your primary...
-
Senior Electronics Design Engineer
3 weeks ago
Grand Rapids, United States GE Aerospace Full timeJob Description Summary About GE Aerospace Working at GE Aerospace means you are bringing your unique perspective, innovative spirit, drive, and curiosity to a collaborative and diverse team working to advance aerospace for future generations. If you have ideas, we will listen. Join us and see your ideas take flight! Engineering is at the center of what we...
-
Electrical Product Development Engineer
3 weeks ago
Grand Rapids, United States Medix Full timeAre you a product development engineer with experience in electrical components? Do you have a passion for IoT and emerging technologies in engineering? This role could be exactly what you're looking for!About the RoleWe are seeking an Electrical Product Development Engineer to join a collaborative and innovative engineering team. This role will focus on...
-
Lead FPGA Hardware Engineer
4 weeks ago
Cedar Rapids, United States Futran Tech Solutions Pvt. Ltd. Full timePrimary Skills Strong technical knowledge related to FPGA development and verification Working knowledge of Xilinx development tools set Working knowledge with Labview and Labview FPGA a plus Have familiarity with DO-254 process 3 New open Positions- Lead FPGA Hardware Engineer: 1. FPGA + DO-254 2. FPGA + UVM 3. Avionics + FPGA + DO-254
-
Lead, Electrical Engineering
4 weeks ago
Mason, OH, United States L3Harris Technologies Full timeJob Title: Lead, Electrical Engineering - Digital DesignJob Code: 19886Job Location: Mason, OHSchedule: 9/80 About Space & Sensors: L3Harris Space & Sensors Division, headquartered in Mason, Ohio, designs, develops, and manufactures complex systems (electronic, avionics, transceivers, transmitters, electro-optical, and electro-mechanical) for the...
-
San Diego, CA, United States Northrop Grumman Full timeRequisition ID: R10169930Category: Engineering Location: San Diego, California, United States of America Clearance Type: Secret Telecommute: Yes-May consider hybrid teleworking for this position Shift: 1st Shift (United States of America) Travel Required: Yes, 10% of the Time Relocation Assistance: Relocation assistance may be available Positions...
-
Electrical Product Development Engineer
3 weeks ago
Grand Rapids, United States Medix™ Full timeAre you a product development engineer with experience in electrical components? Do you have a passion for IoT and emerging technologies in engineering? This role could be exactly what you’re looking for! About the Role We are seeking anElectrical Product Development Engineerto join a collaborative and innovative engineering team. This role will focus on...
-
Electrical Controls Engineering
3 weeks ago
Grand Rapids, MI, United States Kion Group AG Full timeDematic has immediate needs for all levels of Electrical Controls Engineers in our Customer Service Modernizations & Upgrades group! Candidates will have a minimum of 5-8 years of experience in controls engineering or 8-10+ years of experience for senior level positions. Qualified candidates are proficient in planning, creating schematic and panel...
-
DTS Lead Systems Engineer
3 weeks ago
Grand Rapids, United States GE Aerospace Full timeJob Description Summary The DTS Lead Systems Engineer will provide Systems engineering design expertise to the Data Transfer Systems product team. Systems is a cross-functional engineering discipline centered on the product development approach, mindset, and process and includes activities that consider both the business and the technical needs of the...