CNC Operator

2 months ago

Tolleson AZ, United States AirBorn Inc. Full time

SUMMARY: Operates automated and manual equipment.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following:  Other duties may be assigned. 

  • Reads job specifications or work instructions to determine machine adjustments and material requirements. 
  • Sets stops or guides to specified length as indicated by scale, rule, or template, as required. 
  • Positions work piece against stops or aligns layout marks with die or blade. 
  • Locks pieces in place. 
  • Pushes button or depresses pedal to activate machine. 
  • Reports work piece defects or machine malfunction to working foreman. 
  • Makes minor adjustments. 
  • Measures work piece dimensions to determine accuracy of machine operation. 
  • Inspects parts per SPC requirements and charts when needed or required and enters into computer. 
  • Performs minor machine maintenance such as oiling machines, dies or work pieces. 
  • Operates hand tools to remove burrs, sharp edges, rust or scale from work piece. 
  • Assists in machine set up, and stacks, marks, packs, and transports finished work pieces. 

KNOWLEDGE, SKILLS, AND ABILITIES  Requires knowledge typically acquired through:

  • Completion of a high school diploma or general education degree (GED),
  • One to three years related experience or training; and/or equivalent combination of education and experience.
  • Ability to read and comprehend simple instructions, short correspondence, and memos. 
  • Ability to write simple correspondence. 
  • Ability to add and subtract two digit numbers and to multiply and divide with 10’s and 100’s.
  • Ability to comprehend simple decimals and fractions. 
  • Ability to understand and carry out detailed but uninvolved written or oral instructions. 
  • Ability to deal with problems involving a few concrete variables in standardized situations.
  • Ability to perform minor adjustments to tools and equipment. 
  • Ability to maintain tools and equipment utilized in assignments. 

QUALIFICATIONS  To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.  The requirements listed above are representative of the knowledge, skill and/or ability required.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

PHYSICAL DEMANDS  The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.  While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger, handle, or feel objects, tools, and controls, and reach with arms and hands. The employee may be required to regularly lift and/or move up to 10 pounds and occasionally lift and/or move from 25 to 50 pounds.  Specific vision abilities required by this job include close vision, depth perception and the ability to adjust focus.

WORK ENVIRONMENT  The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.  While performing the duties of this job, the employee regularly works near moving mechanical parts and is occasionally exposed to fumes or airborne particles, risk of electrical shock, and vibration.  The noise level in the work environment is usually moderate to loud.

[Equal Opportunity Employer - Disability/Vet]

This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.  Learn more about the ITAR here.  

  • CNC Machinist III

    4 weeks ago

    Tolleson, Arizona, United States TriMas Corporation Full time

    CNC Machinist III Job DescriptionWe are seeking a highly skilled CNC Machinist III to join our team at TriMas Corporation. As a CNC Machinist III, you will be responsible for setting up and operating various conventional and numerically controlled machining centers on complex and difficult jobs.Key Responsibilities:Run multiple machines efficiently, which...

  • CNC Machinist III

    4 weeks ago

    Tolleson, Arizona, United States TriMas Corporation Full time

    CNC Machinist III Job DescriptionWe are seeking a highly skilled CNC Machinist III to join our team at TriMas Corporation. As a CNC Machinist III, you will be responsible for setting up and operating various conventional and numerically controlled machining centers on complex and difficult jobs.Key Responsibilities:Run multiple machines efficiently, which...

  • Manufacturing Engineer/CNC Programmer

    2 weeks ago

    Tolleson, Arizona, United States TriMas Corporation Full time

    Job SummaryWe are seeking a highly skilled Manufacturing Engineer/CNC Programmer to join our team at TriMas Corporation. As a key member of our production engineering team, you will be responsible for creating and editing manufacturing processes and workflows to ensure the highest quality products and efficient production operations.Key...

  • CNC Machinist III

    1 month ago

    Tolleson, United States TriMas Corporation Full time

    CNC Machinist III Company:Martinic Engineering Inc Primary Location:8505 West McDowell Road, Tolleson, AZ 85353 USA Employment Type: Hourly | Full-Time Function:Manufacturing Production / Distribution Equal Opportunity Employer Minorities/Women/Veterans/Disabled Main Duties & Responsibilities Summary: Sets up and operates various conventional and/or...

  • MFG Engineer/CNC Programmer

    18 hours ago

    Tolleson, United States TriMas Corporation Full time

    MFG Engineer/CNC ProgrammerCompany:Martinic Engineering IncPrimary Location:8505 West McDowell Road, Tolleson, AZ 85353 USAEmployment Type: Salaried | Full-TimeFunction:EngineeringEqual Opportunity Employer Minorities/Women/Veterans/Disabled Main Duties & ResponsibilitiesCNCProgrammer / MFG Engineer - Mastercam experience requiredPosition...

  • MFG Engineer/CNC Programmer

    2 days ago

    Tolleson, United States TriMas Corporation Full time

    MFG Engineer/CNC ProgrammerCompany:Martinic Engineering IncPrimary Location:8505 West McDowell Road, Tolleson, AZ 85353 USAEmployment Type: Salaried | Full-TimeFunction:EngineeringEqual Opportunity Employer Minorities/Women/Veterans/Disabled Main Duties & ResponsibilitiesCNCProgrammer / MFG Engineer - Mastercam experience requiredPosition...

  • CNC Operator

    2 months ago

    Tolleson, United States AirBorn Inc. Full time

    SUMMARY: Operates automated and manual equipment.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following:  Other duties may be assigned. Reads job specifications or work instructions to determine machine adjustments and material requirements. Sets stops or guides to specified length as indicated by scale, rule, or template, as required. Positions...

  • CNC Operator

    7 days ago

    Gilbert, AZ, United States AirBorn Inc. Full time

    SUMMARY: Operates automated and manual equipment. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.  Reads job specifications or work instructions to determine machine adjustments and material requirements.  Sets stops or guides to specified length as indicated by scale, rule, or template, as required. ...

  • Tolleson - Injection Mold Maker

    2 weeks ago

    Tolleson, Arizona, United States Ewing Outdoor Supply Full time

    Job SummaryWe are seeking an experienced Injection Mold Maker to join our team at Ewing Outdoor Supply. As an Injection Mold Maker, you will be responsible for creating, repairing, and maintaining precision molds used in the injection molding process for manufacturing plastic products.The ideal candidate should have a strong attention to detail, excellent...

  • Injection Mold Maker

    2 weeks ago

    Tolleson, Arizona, United States Ewing Outdoor Supply Full time

    Job SummaryWe are seeking an experienced Injection Mold Maker to join our team at Ewing Outdoor Supply. As an Injection Mold Maker, you will be responsible for creating, repairing, and maintaining precision molds used in the injection molding process for manufacturing plastic products.Key Responsibilities:Interpret blueprints, technical drawings, and CAD...

  • Assembly Technician

    1 month ago

    Prescott Valley, AZ, United States Elwood Staffing Full time

    Assembly Job DescriptionElwood Staffing is seeking a skilled Assembly Technician to join their team in Prescott, AZ. As an Assembly Technician, you will be responsible for assembling and inspecting firearms, operating CNC machines, and performing other duties as assigned.Key Responsibilities:Assemble and inspect firearms to ensure quality and accuracyOperate...

  • Manufacturing Engineering Specialist

    1 week ago

    Kingman, AZ, United States Crown Equipment Full time

    Job Summary:Crown Equipment is seeking a skilled Manufacturing Engineering Contractor to join our team. As a key member of our manufacturing operations, you will be responsible for supporting current process technology and implementing improvements to department/plant operations based on manufacturing engineering analysis of existing operations compared to...

  • Sr Lead Machinist Tech

    4 weeks ago

    Tucson, AZ, United States Raytheon Full time

    Date Posted: 2024-09-25 Country: United States of America Location: AZ872: RMS AP Bldg East Hermans Road Building 914, Tucson, AZ, 85756 USA Position Role Type: Onsite At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength...

  • Manufacturing Process Specialist

    1 week ago

    Kingman, AZ, United States Crown Equipment Full time

    Job Summary:Crown Equipment Corporation is a leading innovator in world-class forklift and material handling equipment and technology. As one of the world's largest lift truck manufacturers, we are committed to providing the customer with the safest, most efficient and ergonomic lift truck possible to lower their total cost of ownership.Key...

  • Sr Lead Machinist Tech

    3 weeks ago

    Tucson, AZ, United States Raytheon Full time

    Date Posted:2024-09-25Country:United States of AmericaLocation:AZ872: RMS AP Bldg East Hermans Road Building 914, Tucson, AZ, 85756 USAPosition Role Type:OnsiteAt Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than...