Sheetmetal Technician II

2 months ago

SAN PEDRO CA, United States Gulfstream Aerospace Corporation Full time

Sheetmetal Technician II in  GAC Van Nuys


Unique Skills:

Van Nuys

First shift role 

The compensation range for this role is:

   $28.05 to  $31.00 per Hour

Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.


 

 

Education and Experience Requirements High School Diploma or GED required. 2 years experience of sheetmetal and/or fabrication experience. Valid Driver’s License required.

Position Purpose:

The Sheetmetal Technician II works under general supervision to safely layout, fabricate and install parts, equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Job Description

Principle Duties and Responsibilities:

Essential Functions:
  1. Safely perform sheet-metal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft under general supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications.

Use blueprints to cut and form plastics and follow standard operating procedures when using adhesives, sealants and solvents.

Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information.

Safely operate shop equipment such as: brakes, presses, riveting equipment, shears, and hand tools associated with sheet-metal functions. Use the proper hardware for various sheetmetal applications.

Comply with all safety, 5S, and housekeeping policies. Use personal protective equipment as required. Ensure aircraft interior is protected (PTP).

Assist in monthly 5S audits.

Use the material tracking system to create parts demand, track squawks and to sign-off work.

Assist in developing initiatives to meet individual OGSM requirements, as required.

Additional Functions:
  1. Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.). .

Properly use and maintain company-provided tools and equipment and returns items to tool room after use. .

Ensure standard operating procedures are followed when operating ground support equipment. .

Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. .

Ensure accurate daily job charging to the aircraft. .

Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership. .

Assist in maintaining shop equipment and associated JSAs. .

Perform other duties as assigned.

Other Requirements:
  1. A working knowledge of sheet-metal installation and fabrication processes (measuring, cutting, bending, forming, and drilling of aluminum sheet stock, angle and honeycomb) is required.

Ability to read and interpret blueprints and engineering documentation.

Valid drivers license required. to operate towing and other Gulfstream transportation equipment.

Ability to read, write, speak, and understand the English language.

Able to use tools and equipment associated with sheetmetal installation and fabrication work.

Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift.

Must have a good working knowledge of computers and experience working with Microsoft Office suite.

Must be able to read, write, speak, and understand the English language.

Additional Information

Requisition Number: 221323

Category: Operations

Percentage of Travel: Up to 25%

Shift: First

Employment Type: Full-time

Posting End Date: 08/02/2024 

 

Equal Opportunity Employer/Veterans/Disabled.

 

 

Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.

 

 Legal Information | Site Utilities | Contacts | Sitemap
Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.
 

Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

  • Sheetmetal Technician Sr

    1 week ago

    San Pedro, United States Gulfstream Aerospace Corporation Full time

    Sheetmetal Technician Sr in GAC Van Nuys Unique Skills:Must have strong aircraft modification and sheetmetal skillsMust be available to work any shiftThe compensation range for this role is:$35. 20 to $38. 90 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications,...

  • Sheetmetal Technician Sr

    2 months ago

    San Pedro, United States Gulfstream Aerospace Corporation Full time

    Sheetmetal Technician Sr in  GAC Van Nuys Unique Skills: Must have strong aircraft modification and sheetmetal skills Must be available to work any shift The compensation range for this role is:    $35.20 to  $38.90 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred...

  • Sheetmetal Technician Sr

    1 month ago

    San Pedro, United States Gulfstream Aerospace Corporation Full time

    Sheetmetal Technician Sr in  GAC Van Nuys Unique Skills: Must have strong aircraft modification and sheetmetal skills Must be available to work any shift The compensation range for this role is:    $35.20 to  $38.90 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred...

  • Sheetmetal Technician Sr

    1 month ago

    San Pedro, CA, United States Gulfstream Aerospace Corporation Full time

    Sheetmetal Technician Sr in  GAC Van Nuys Unique Skills: Must have strong aircraft modification and sheetmetal skills Must be available to work any shift The compensation range for this role is:    $35.20 to  $38.90 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred...

  • Sheetmetal Technician II

    1 month ago

    Los Angeles, CA, United States Gulfstream Aerospace Corporation Full time

    Sheetmetal Technician II in  GAC Van Nuys Unique Skills: Van Nuys First shift role  The compensation range for this role is:    $28.05 to  $31.00 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience...

  • Sheetmetal Technician Senior

    1 day ago

    Long Beach, CA, United States Gulfstream Aerospace Corporation Full time

    Job Summary:The Sheetmetal Technician Senior will work under minimal supervision to safely lay-out, fabricate and install parts, equipment and fabricated items on aircraft following established operating procedures. This role requires advanced knowledge of sheetmetal or fabrication processes and the ability to read and interpret blueprints and engineering...

  • Sheetmetal Technician Sr

    2 months ago

    Lynwood, CA, United States Gulfstream Aerospace Corporation Full time

    Sheetmetal Technician Sr in GAC Van Nuys Unique Skills: Must have strong aircraft modification and sheetmetal skills Must be available to work any shift The compensation range for this role is: $35.20 to $38.90 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred...

  • Sheetmetal Technician Sr

    2 months ago

    Lynwood, CA, United States Gulfstream Aerospace Corporation Full time

    Sheetmetal Technician Sr in GAC Van Nuys Unique Skills: Must have strong aircraft modification and sheetmetal skills Must be available to work any shift The compensation range for this role is: $35.20 to $38.90 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred...

  • Sheetmetal Technician Sr

    2 months ago

    Long Beach, CA, United States Gulfstream Aerospace Corporation Full time

    Sheetmetal Technician Sr in  GAC Van Nuys Unique Skills: Must have strong aircraft modification and sheetmetal skills Must be available to work any shift The compensation range for this role is:    $35.20 to  $38.90 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred...

  • Experienced Sheetmetal Fabricator

    2 months ago

    San Francisco, California, United States Gulfstream Aerospace Corporation Full time

    Sheetmetal Technician II OverviewUnique Skills:First shift roleThe compensation range for this role is: $28.05 to $31.00 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location. Education and Experience...

  • Sheetmetal Fabrication Specialist

    2 days ago

    Long Beach, CA, United States Gulfstream Aerospace Corporation Full time

    Job Summary:The Sheetmetal Technician Senior is a key member of our team at Gulfstream Aerospace Corporation, responsible for safely laying out, fabricating, and installing parts, equipment, and fabricated items on aircraft. This role requires strong sheetmetal and fabrication skills, as well as the ability to read and interpret blueprints and engineering...

  • Sheetmetal Fabrication Specialist

    1 month ago

    Palos Verdes Peninsula, CA , USA, United States Gulfstream Aerospace Corporation Full time

    Job SummaryWe are seeking a skilled Sheetmetal Technician II to join our team at Gulfstream Aerospace Corporation. As a key member of our operations team, you will be responsible for safely laying out, fabricating, and installing parts, equipment, and fabricated items on aircraft.Key ResponsibilitiesSafely perform sheet-metal layout, fabrication, and...

  • Sheetmetal Fabrication Specialist

    1 month ago

    Palos Verdes Peninsula, CA , USA, United States Gulfstream Aerospace Corporation Full time

    Job SummaryWe are seeking a skilled Sheetmetal Technician II to join our team at Gulfstream Aerospace Corporation. As a key member of our operations team, you will be responsible for safely laying out, fabricating, and installing parts, equipment, and fabricated items on aircraft.Key ResponsibilitiesSafely perform sheet-metal layout, fabrication, and...

  • Traveling Operations Technician

    2 months ago

    Lynwood, CA, United States Gulfstream Aerospace Corporation Full time

    Sheetmetal Technician Sr in GAC Van Nuys Unique Skills: Must have strong aircraft modification and sheetmetal skills Must be available to work any shift The compensation range for this role is: $35.20 to $38.90 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred...

  • Sheetmetal Superintendent

    4 weeks ago

    San Antonio, Texas, United States K2 Staffing Full time

    Job OverviewWe are seeking a highly skilled and experienced Sheetmetal Superintendent to join our team at K2 Staffing. As a key member of our team, you will be responsible for supervising the installation of pipefitting projects ranging from $250,000 to $8,000,000.Key ResponsibilitiesSupervise work performed on systems ranging in difficulty from small basic...

  • Sheetmetal Superintendent

    1 week ago

    San Antonio, Texas, United States K2 Staffing Full time

    Job OverviewK2 Staffing is seeking a highly skilled Sheetmetal Superintendent to join our team. As a key member of our organization, you will be responsible for supervising the installation of pipefitting projects, ensuring timely completion, and maintaining a safe work environment.Key ResponsibilitiesSupervise work performed on systems ranging from small...

  • Avionics Electronics Technician II

    2 weeks ago

    San Pedro, United States Gulfstream Aerospace Corporation Full time

    Avionics Electronics Technician II in  GAC Van Nuys Unique Skills: The compensation range for this role is: $35.19 - 38.90 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.     ...

  • Avionics Electronics Technician II

    2 weeks ago

    San Pedro, United States Gulfstream Aerospace Corporation Full time

    Avionics Electronics Technician II in  GAC Van Nuys Unique Skills: The compensation range for this role is: $35.19 - 38.90 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.     ...

  • RS Avionics Electrical Technician II

    1 month ago

    San Pedro, United States Gulfstream Aerospace Corporation Full time

    RS Avionics Electrical Technician II in  GAC Van Nuys Unique Skills: Day Shift - Van Nuys The compensation range for this role is:  $35.19 - 38.90 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and...

  • Pharmacy Technician II

    7 days ago

    San Antonio, Texas, United States Christus Health Full time

    Job SummaryWe are seeking a highly skilled Pharmacy Technician II to join our team at Christus Health. As a Pharmacy Technician II, you will play a vital role in providing exceptional pharmacy services to our patients and customers.Key ResponsibilitiesAssist pharmacists with medication histories and verify patient medication records accurately.Train and...