Current jobs related to Sheet Metal Fabricator - Allen - Manpower

  • CNC Programmer

    2 days ago

    Allen, United States All Metals Fabricating Full time

    Job DescriptionJob DescriptionEssential Duties and Responsibilities:  ·        Perform related duties as assigned by supervisor.·        Maintain compliance with all company policies and procedures.·        Assume accountability for time management and job tracking.·        Develop and maintain an open mind to learn new...

  • Metal Fabricator II

    2 weeks ago

    Allen Park, Michigan, United States HRU Inc Technical Resources Full time

    Job SummaryThe Fabricator II (Metal) is responsible for preparing, cutting, shaping, and welding metal using hand tools and equipment such as band saws, material brakes, and material shears. This role will provide fabrication support for the garage and shop services teams, performing independent project tasks and collaborating with customers to meet...

  • Misc Metals Fabricator

    3 weeks ago

    Glen Allen, United States Custom Ornamental Iron Inc Full time

    Fabricator for a Misc Metals Shop-Cut metal materials. Read blueprints. Experience in rail fabrication. Aluminum. MIG welding. Must know degree cuts. Must be able to use a tape measure. 40+ hours a week. Must have reliable transportation. Experience building decks & interior stairs is an added benefit. Please make sure relevant experience is listed on your...

  • Misc Metals Fabricator

    3 weeks ago

    Glen Allen, United States Custom Ornamental Iron Inc Full time

    Fabricator for a Misc Metals Shop-Cut metal materials. Read blueprints. Experience in rail fabrication. Aluminum. MIG welding. Must know degree cuts. Must be able to use a tape measure. 40+ hours a week. Must have reliable transportation. Experience building decks & interior stairs is an added benefit. Please make sure relevant experience is listed on your...

  • Fabricator II

    3 weeks ago

    Allen Park, United States Nesco Resource Full time

    To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.The requirements listed below are representative of the knowledge, skill, and/or ability required.Reasonable accommodations may be made to enable individuals with disabilities to perform theessential job functions.Job Summary:The Fabricator II (Metal)...

  • Fabricator - PM (Afternoons)

    4 weeks ago

    Allen Park, United States Global Technology Associates Full time

    Job DescriptionJob DescriptionFabricatorSchedule: 3:15pm-12:00AM (plus weekends and OT as needed)Additional Benefits: Health, Dental, Vision, 401(k), company-paid holidays and more!Type of hire: Contract, long-term with ongoing potential.Position Summary :The Fabricator will prepare, cut, shape, and weld metal using hand tools and equipment suchas band saws,...

  • Fabricator II

    4 weeks ago

    Allen Park, United States Nesco Resource Full time

    3:15pm to 12am Monday-Friday, OT as needed To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.The requirements listed below are representative of the knowledge, skill, and/or ability required.Reasonable accommodations may be made to enable individuals with disabilities to perform theessential job...

  • Welder - Pipe Fabrication Specialist

    2 months ago

    Port Allen, Louisiana, United States Turner Industries Full time

    Job SummaryWe are seeking a skilled Welder - Pipe Fabrication Specialist to join our team at Turner Industries. As a key member of our pipe fabrication team, you will be responsible for welding pipe spools and interpreting weld maps and procedures.Key ResponsibilitiesInterpret and follow weld maps and procedures to ensure high-quality weldsIdentify and weld...

  • Maintenance Specialist

    1 month ago

    Port Allen, Louisiana, United States Precoat Metals Full time

    {"Job Title": "Maintenance Technician", "Company Description": "Precoat Metals is a leading provider of metal coating solutions. Our team is dedicated to delivering high-quality products and services to our customers.", "Job Description": "We are seeking a skilled Maintenance Technician to join our team at our Baton Rouge facility. As a Maintenance...

  • R&D Engineer III

    2 weeks ago

    Allen, Texas, United States Quest Medical, Inc. Full time

    Job Title: R&D Engineer IIIQuest Medical, Inc. is seeking a highly skilled R&D Engineer III to join our team. As a key member of our product development team, you will be responsible for designing and developing new products within our existing product portfolio, as well as exploring new markets for our company.Key Responsibilities:Design and develop...

  • R&D Engineer II/III

    4 weeks ago

    Allen, Texas, United States Quest Medical, Inc. Full time

    Job Title: R&D Engineer II/IIIQuest Medical, Inc. is seeking a highly skilled R&D Engineer II/III to join our team. As a key member of our product development team, you will be responsible for designing and developing new products within our existing product portfolio, as well as exploring new markets for our company.Key Responsibilities:Design and develop...

  • R&D Engineer III

    3 weeks ago

    Allen, United States Quest Medical, Inc. Full time

    Summary:The R&D Engineer III will design and develop new products within the existing product portfolio (Cardiac Surgery, Ophthalmology and IV Therapy) as well as new markets for Quest Medical. The R&D Engineer III will be the project leader for these products and will be expected to lead a cross-functional team to ensure all phases of the design controls...

  • R&D Engineer III

    1 week ago

    allen, United States Quest Medical, Inc. Full time

    Summary:The R&D Engineer III will design and develop new products within the existing product portfolio (Cardiac Surgery, Ophthalmology and IV Therapy) as well as new markets for Quest Medical. The R&D Engineer III will be the project leader for these products and will be expected to lead a cross-functional team to ensure all phases of the design controls...

  • R&D Engineer III

    3 weeks ago

    Allen, United States Quest Medical, Inc. Full time

    Summary:The R&D Engineer III will design and develop new products within the existing product portfolio (Cardiac Surgery, Ophthalmology and IV Therapy) as well as new markets for Quest Medical. The R&D Engineer III will be the project leader for these products and will be expected to lead a cross-functional team to ensure all phases of the design controls...

  • Maintenance Specialist

    3 weeks ago

    Port Allen, Louisiana, United States AZZ Inc. Full time

    Job SummaryAZZ Inc. is seeking a skilled Maintenance Technician to join our team at our Baton Rouge facility. As a key member of our maintenance team, you will be responsible for performing routine preventive maintenance on equipment and buildings, diagnosing mechanical problems, and repairing or replacing defective equipment parts.Key...

  • Prototype Development Engineer

    3 weeks ago

    Allen Park, Michigan, United States Ford Motor Company Full time

    Job Title: Prototype Development EngineerAt Ford Motor Company, we are seeking a highly skilled Prototype Development Engineer to join our team. As a key member of our Product Development team, you will be responsible for designing, planning, and producing components, fixtures, and prototypes for development and production needs.Key Responsibilities:Provide...

  • Pipefitter

    1 week ago

    Port Allen, Louisiana, United States Turner Industries Full time

    Job SummaryTurner Industries is a leading industrial contractor seeking a skilled Pipefitter to join our team. As a Pipefitter, you will be responsible for laying out, fabricating, assembling, installing, and maintaining piping and piping systems for various industrial processes.Key Responsibilities:Lay out and fabricate piping and piping systems according...

  • Pipefitter Maintenance Specialist

    4 weeks ago

    Port Allen, Louisiana, United States Turner Industries Full time

    Job SummaryTurner Industries is seeking a skilled Pipefitter to join our team in Port Allen, LA. As a Pipefitter, you will be responsible for laying out, fabricating, assembling, installing, and maintaining piping and piping systems, fixtures, and equipment for various industrial processes.Key ResponsibilitiesLay out, fabricate, assemble, install, and...

  • Marine Foreman

    4 weeks ago

    Allen, TX, United States McMillen Full time

    The Marine Foreman is responsible for maintaining & operating pile driving equipment, barge movement, skiff operations, tying up barges line handling, loading and unloading piling, material, and equipment. Performing all tasks associated with placing steel beams for templates including welding and burning, rigging and signaling crane to pick beams, piling,...

  • Aftertreatment Systems Architect

    4 days ago

    Allen Park, Michigan, United States Advantage Technical Full time

    Position Overview:We are seeking a highly skilled Aftertreatment Systems Architect to join our team at Advantage Technical. As a key member of our OEM team, you will play a critical role in defining and developing innovative aftertreatment systems for our smart vehicles.Key Responsibilities: Define "Best-In Class" aftertreatment system architecture,...

Sheet Metal Fabricator

3 months ago

Allen, United States Manpower Full time

Our client, an innovator in the elevator industry, is seeking a Fabricator to join their team. As a Fabricator, you will be part of the Fabrication Team supporting Production. The ideal candidate will have solid attendance history, strong work ethic, and attention-to-detail, which will align successfully in the organization.
 
Job Title: Sheet Metal Fabricator / Press Brake Operator
Location: Allen, TX
Pay Range: $24++ / hour depending on experience

What’s the Job?
Requires:

  • Ability to use / run press brake machines to make components for larger products
  • Knowledgeable in laser-cutting 
  • Duties include reading blueprints & schematics
  • Assemble and construct metal products, ensuring that the final product is accurate, functional, and meets the required specification
  • These skills considered a plus: nesting / programming, laser marking, and mechanical engraving
 
What’s Needed?
  • Sheet Metal Fabrication experience: 12 months
  • Press Brake experience: 12 months
  • Laser Cutting experience: 12 months
  • Assembly experience: 6 months
  • Ability to read and interpret drawings / schematics / blueprints
 
Why you should choose Manpower:
  • Free training to upgrade your skills, including a free college tuition program
  • Medical, dental, vision, 401k
  • Weekly pay with direct deposit
  • Dedicated Career Partner to help you achieve your career goals
  • Voted #1 Best Places to Work by Glassdoor 2021


If this is a role that interests you and you’d like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you
 
About ManpowerGroup, Parent Company of:  Manpower, Experis, Talent Solutions, and Jefferson Wells
ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands – Manpower, Experis, Talent Solutions, and Jefferson Wells – creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2022 ManpowerGroup was named one of the World's Most Ethical Companies for the 13th year - all confirming our position as the brand of choice for in-demand talent.