CNC Machinist

2 weeks ago

East Granby, United States Barnes Group Full time
Position Details:

1st Shift 6:30am-3pm Mon-Fri

Your Expertise:

  • 2-5 years of experience machining in an aerospace environment
  • Experience in machining plasma coatings and K/E seals on rotating aircraft parts
  • Strong mathematical skills and knowledge of GD&T
  • Familiar with Statistical Process Control (SPC)
  • Willing to learn basic CNC Programming


Is your expertise different from the above? If you have a good attitude and a willingness to learn and new trade or skill, we want to hear from you. Apply today

Your Challenge:

  • Set-up and operate NC VTL machines for pre-machining and finish machining for required operations or the repair of aircraft parts.
  • Work from process traveler, blueprints, parts drawings, manuals, specifications, operations sheets and verbal directions to determine proper dimensions and tolerances of finished part, sequence of operations, and set-up requirements for machining functions
  • Verify dimensions using standard measuring instruments, such as micrometers, depth gage, height gage, and vernier
  • Work with engineering department regarding material conditions, best positioning of part, tool pressure, etc. as required


Education Requirements:

  • High school diploma or equivalent required


This position is a safety sensitive position. Applicant must comply with all applicable FAA and DOT drug and alcohol testing rules.

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

  • CNC Machinist

    1 week ago

    East Granby, United States Barnes Group Full time

    Barnes Aerospace MRO East Granby Division has an exciting and challenging career opportunity for a CNC Machinist Mill operator. This position requires experience, initiative and ingenuity and the ability to work independently to produce the highest level of quality and productivity against established standards. You will work constructively with Engineering,...

  • CNC Machinist

    12 hours ago

    East Stroudsburg, United States BuildSubmarines.com Full time

    Overview Morgan Advanced Materials is a world leader in advanced materials science and engineering of ceramics, carbon and composites. We operate in a series of well-defined markets where our applications expertise offers our customers a valuable differentiator, engineering high-specification materials, components and sub-assembly parts that solve their...

  • CNC Machinist

    Found in: Resume Library US A2 - 7 days ago

    East Stroudsburg, Pennsylvania, United States Morgan Advanced Materials Full time

    Overview: Morgan Advanced Materials is a world leader in advanced materials science and engineering of ceramics, carbon and composites. We operate in a series of well-defined markets where our applications expertise offers our customers a valuable differentiator, engineering high-specification materials, components and sub-assembly parts that solve their...

  • CNC Machinists

    6 days ago

    East Aurora, United States EverFab Inc Full time

    CNC Machinists Set-up and Programming Mill • Lathe • Multi-Axis (Hourly $22 - $40) Email Resume to: direct apply To learn more about our company and view all of our current opening, go to below link. Family owned and operated in WNY for 44 years We offer signing bonus’ and competitive wages. Full time benefits include 10½ paid holidays, personal...

  • CNC Mill Machinist

    6 days ago

    East Aurora, United States EverFab Inc Full time

    WE ARE LOOKING FOR AN EXPERIENCED CNC MAZAK MACHINIST WITH MASTERCAM. DO YOU LIKE TO BE CHALLENGED? DO YOU HAVE A GOOD WORK ETHIC? THEN WE ARE LOOKING FOR YOU TO JOIN OUR TEAM!!! Signing bonus applicable $2,500. Experience and skill considered in Final Wage determination. EverFab, Inc. is a leading precision manufacturer in the East Aurora area for over 43...

  • CNC Mill Machinist

    1 week ago

    East Aurora, United States EverFab, Inc. Full time

    WE ARE LOOKING FOR AN EXPERIENCED CNC MAZAK MACHINIST WITH MASTERCAM. DO YOU LIKE TO BE CHALLENGED? DO YOU HAVE A GOOD WORK ETHIC? THEN WE ARE LOOKING FOR YOU TO JOIN OUR TEAM!!! Signing bonus applicable $2,500. Experience and skill considered in Final Wage determination. EverFab, Inc. is a leading precision manufacturer in the East Aurora area for over 43...

  • CNC Machinist 2

    Found in: Talent US C2 - 2 weeks ago

    East Windsor, United States Hanwha Aerospace USA Full time

    CNC Machinist 2 – Non-ExemptHanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents.Plan and...

  • CNC Machinist

    6 days ago

    East Granby, United States Barnes Group Full time

    Position Details:Weekend Shift: Fri - Sun 5:00am - 5:00pm plus 20% differentialYour Expertise: 2-5 years of experience machining in an aerospace environment Experience in machining plasma coatings and K/E seals on rotating aircraft parts Strong mathematical skills and knowledge of GD&T Familiar with Statistical Process Control (SPC) Willing to learn basic...

  • CNC Machinist

    6 days ago

    East Granby, United States BuildSubmarines.com Full time

    Position Details: Weekend Shift: Fri - Sun 5:00am - 5:00pm plus 20% differential Your Expertise: 2-5 years of experience machining in an aerospace environment Experience in machining plasma coatings and K/E seals on rotating aircraft parts Strong mathematical skills and knowledge of GD&T Familiar with Statistical Process Control (SPC) Willing to learn...

  • CNC Machinist

    5 days ago

    East Granby, United States BuildSubmarines.com Full time

    Position Details: 1st Shift 6:30am-3pm Mon-Fri Your Expertise: 2-5 years of experience machining in an aerospace environment Experience in machining plasma coatings and K/E seals on rotating aircraft parts Strong mathematical skills and knowledge of GD&T Familiar with Statistical Process Control (SPC) Willing to learn basic CNC Programming Is your...

  • CNC Machinist

    1 week ago

    East Granby, United States Barnes Group Full time

    Position Details:2nd Shift 3:00pm-11:30pm Mon-Thurs + 12% Differential3rd Shift 11:00pm-7:00am Mon-Thurs + 17% DifferentialYour Expertise: 2-5 years of experience machining in an aerospace environment Experience in machining plasma coatings and K/E seals on rotating aircraft parts Strong mathematical skills and knowledge of GD&T Familiar with Statistical...

  • CNC Machinist

    1 week ago

    East Granby, United States Barnes Group Full time

    Position Details:Weekend Shift: Fri - Sun 5:00am - 5:00pm plus 20% differentialYour Expertise: 2-5 years of experience machining in an aerospace environment Experience in machining plasma coatings and K/E seals on rotating aircraft parts Strong mathematical skills and knowledge of GD&T Familiar with Statistical Process Control (SPC) Willing to learn basic...

  • CNC Machinist

    1 week ago

    East Granby, United States Barnes Group Full time

    Position Details:1st Shift 6:30am-3pm Mon-FriYour Expertise: 2-5 years of experience machining in an aerospace environment Experience in machining plasma coatings and K/E seals on rotating aircraft parts Strong mathematical skills and knowledge of GD&T Familiar with Statistical Process Control (SPC) Willing to learn basic CNC Programming Is your expertise...

  • CNC MILLING MACHINIST

    Found in: Careerbuilder One Red US C2 - 1 week ago

    East Hartford, CT 06108, USA, United States ATI Full time

    ATI - East Hartford [Production Operator / Machinist] As a Machinist at ATI, you'll: Set up and operate machine tools, adjusting stops, feeds and speeds for efficient machining; Receive instructions from supervisor and review with off-going machine operator all material in-process; Select tooling in accordance to the machinability of the material and at...

  • CNC Programmer

    1 week ago

    East Syracuse, United States Kelly Science Engineering Technology & Telecom Full time

    CNC Programmer - East Syracuse, NY $70,000 to $90,000 Full Time / Direct Hire Summary/Objective The CNC Programmer prepares detailed manufacturing instructions and programming data to produce machined parts and sub-assemblies using horizontal and vertical CNC machining centers to meet engineering drawings and specifications. The CNC Programmer determines...

  • CNC Programmer

    1 week ago

    East Syracuse, United States Kelly Science, Engineering, Technology & Telecom Full time

    CNC Programmer - East Syracuse, NY$70,000 to $90,000 Full Time / Direct HireSummary/Objective: The CNC Programmer prepares detailed manufacturing instructions and programming data to produce machined parts and sub-assemblies using horizontal and vertical CNC machining centers to meet engineering drawings and specifications. The CNC Programmer determines...

  • CNC Programmer

    Found in: Appcast US C2 - 1 week ago

    East Syracuse, United States Kelly Science, Engineering, Technology & Telecom Full time

    CNC Programmer - East Syracuse, NY$70,000 to $90,000 Full Time / Direct HireSummary/Objective: The CNC Programmer prepares detailed manufacturing instructions and programming data to produce machined parts and sub-assemblies using horizontal and vertical CNC machining centers to meet engineering drawings and specifications. The CNC Programmer determines...

  • CNC Programmer

    Found in: Appcast Linkedin GBL C2 - 2 weeks ago

    East Syracuse, United States Kelly Science, Engineering, Technology & Telecom Full time

    CNC Programmer - East Syracuse, NY$70,000 to $90,000 Full Time / Direct HireSummary/Objective: The CNC Programmer prepares detailed manufacturing instructions and programming data to produce machined parts and sub-assemblies using horizontal and vertical CNC machining centers to meet engineering drawings and specifications. The CNC Programmer determines...

  • CNC Programmer

    Found in: Talent US C2 - 2 weeks ago

    East Syracuse, United States MyKelly Full time

    CNC PROGRAMMER - East Syracuse, NY$70,000 to $100,000 - Full Time / Direct Hire w/ BenefitsSummary/Objective:The CNC Programmer prepares detailed manufacturing instructions and programming data to produce machined parts and sub-assemblies using horizontal and vertical CNC machining centers to meet engineering drawings and specifications. The CNC Programmer...

  • Toolmaker

    4 days ago

    East Canton, United States Job Juncture Full time

    Title: Toolmaker Are you a skilled machinist with a passion for precision manufacturing? We are seeking an experienced and enthusiastic Toolmaker to join our team. As a Toolmaker, you will play a crucial role in fabricating tooling, fixtures, and complex assemblies with tight tolerances. If you have a strong background in machining and a keen eye for...