I&C Engineer

1 week ago

Camden, United States Holtec International Full time

Job Description: Holtec International, a global turnkey supplier of equipment and systems for the nuclear, solar, geothermal and fossil power generation sectors of the energy industry, is seeking to add an Instrumentation and Controls Engineer to their SMR-160 nuclear reactor engineering team. The Engineer is responsible for the design and analysis of safety and non-safety related I&C systems for the SMR-160 Small Modular Reactor (SMR) under the direction of a senior engineer and regularly interfacing with the mechanical, nuclear, and electrical engineering teams for I&C design and consultation. This Engineer applies his or her knowledge and experience, industry best practices, regulatory guidance, codes and standards, and good engineering judgment to ensure the design is compliant with International regulatory criteria and industry best practices. Specific Area of Responsibility:
Develop Control System Descriptions for plant systems
Review and provide I&C insight into P&ID development
Read, interpret and develop logic diagrams, Instrument and I/O Lists
Develop system function and design requirement specifications and other system design documents
Preform Human Factors analysis of plant systems.
Perform sizing and specifying I&C (transmitters, operators, control valves, switches, etc.) equipment
Perform I&C calculations: setpoint, loop calibration, and instrument calibration tolerances
Perform instrument vendor selection and vetting

Minimum Requirements:
BS in Engineering from an ABET accredited college or university.
0-5 years of demonstrated applicable experience in power generation (nuclear, fossil, etc.) I&C system design
Demonstrated technical writing skills and effective communication skills.
Demonstrated good judgment, ability to act independently, flexibility, adaptability and leadership skills.
Ability to plan and organize work tasks and meet deadlines.
Strong inter-personal skills; effective in a team environment.
Eligible to work in accord with Department of Energy 10 CFR Part 810.

Desired Qualifications:
MS in I&C/Electrical Engineering or a closely related field of study from an accredited college or university.
>5 years of demonstrated applicable experience in power generation (nuclear, fossil, etc.) I&C system design
Experience designing or supporting I&C systems such as neutron flux monitoring, control rod drive systems, radiation monitoring, plant protection systems, integrated control systems.
Experience in performing Human Factors analysis of plant systems, especially in the nuclear fields.
Experience in integrated plant control design and tuning or major system commissioning including testing development.
Experience with NUREG 0800, Chapters 7 and 18.
Knowledge and understanding of US domestic or international licensing standards.
Experience with applicable (including nuclear-specific) IEEE, IEC, EPRI, ISA, ANSI, and IAEA codes and standards.
Experience with Cyber Security/CDAs.

  • I&C Engineer

    1 week ago

    Camden, United States Holtec International Full time

    Job DescriptionJob DescriptionJob Description:Holtec International, a global turnkey supplier of equipment and systems for the nuclear, solar, geothermal and fossil power generation sectors of the energy industry, is seeking to add an Instrumentation and Controls Engineer to their SMR-160 nuclear reactor engineering team. The Engineer is responsible for the...

  • Simulator Design Engineer

    1 week ago

    Camden, United States Holtec International Full time

    Job DescriptionJob DescriptionHoltec International and its subsidiary companies are designing an unfailingly safe and secure source of clean energy using nuclear fission, called the SMR-160 small modular reactor. The position is offered by SMR LLC as a member of the Holtec International family, a global turnkey supplier of equipment and systems for nuclear,...

  • Simulator Design Engineer

    2 hours ago

    Camden, United States Holtec International Full time

    Job DescriptionJob DescriptionHoltec International and its subsidiary companies are designing an unfailingly safe and secure source of clean energy using nuclear fission, called the SMR-160 small modular reactor. The position is offered by SMR LLC as a member of the Holtec International family, a global turnkey supplier of equipment and systems for nuclear,...

  • Principal Simulator Design Engineers

    1 week ago

    Camden, United States CareerBuilder Full time

    The Principal Simulator Design Engineers will contribute to the designing process of a SMR-160 small modular reactor (an unfailingly safe and secure source of clean energy using nuclear fission). Responsibilities: Develop and maintain software utilized in the SMR-160 simulator; Apply industry best practices, codes and standards, and regulatory guidance to...

  • Principal Simulator Design Engineers

    1 week ago

    Camden, United States Holtec International Full time

    The Principal Simulator Design Engineers will contribute to the designing process of a SMR-160 small modular reactor (an unfailingly safe and secure source of clean energy using nuclear fission). Responsibilities: Develop and maintain software utilized in the SMR-160 simulator; Apply industry best practices, codes and standards, and regulatory guidance to...

  • Electrical Engineer

    2 weeks ago

    Camden, United States Holtec International Full time

    Job DescriptionJob DescriptionJob Description:Holtec International, a global turnkey supplier of equipment and systems for the nuclear, solar, geothermal and fossil power generation sectors of the energy industry, is seeking to add an Electrical Engineer to their SMR-160 nuclear reactor engineering team. The Engineer is responsible for the design and...

  • Field Engineer

    1 week ago

    Camden, United States Holtec International Full time

    Job DescriptionJob DescriptionCIVIL FIELD ENGINEER POSITIONHoltec International is seeking a Civil Field Engineer to assist in the management of construction projects at various Nuclear Power Plants across the United States. Essential Duties and Responsibilities: The Civil Field Engineer reports to both the Civil Engineering Manager and the Construction...

  • Software Engineer

    7 days ago

    Camden, United States Harris Geospatial Solutions Full time

    We are seekinga Software Engineer to join our team in Huntsville, AL. Under general supervision and following established policies the Software Engineer performs professional assignments that require general use and application of concepts, practices and techniques. Essential Functions: Configure and implement Operational Technology (OT) operating system,...

  • FPGA/ASIC Design Engineer with Security Clearance

    Found in: Dice One Red US C2 - 1 week ago

    Camden, United States Indotronix International Corp Full time

    Job Title: FPGA/ASIC Design EngineerLocation: Camden, NJDuration: 12 MonthsPay: $125/hr on W2Active Secret Clearance Major purpose: The FPGA/ASIC Design Engineer will be responsible for the architecture, implementation, verification/validation through Software integration test, for delivery of complex FPGAs AND/OR ASICs systems. This is a key, high impact,...

  • FPGA/ASIC Design Engineer with Security Clearance

    Found in: Careerbuilder One Red US C2 - 2 weeks ago

    Camden, NJ, United States Indotronix International Corp Full time

    Job Title: FPGA/ASIC Design EngineerLocation: Camden, NJDuration: 12 MonthsPay: $125/hr on W2Active Secret Clearance Major purpose: The FPGA/ASIC Design Engineer will be responsible for the architecture, implementation, verification/validation through Software integration test, for delivery of complex FPGAs AND/OR ASICs systemsThis is a key, high impact,...

  • CNC Machinist- Relocation Assistance Provided

    2 weeks ago

    Camden, United States Holtec International Full time

    Job DescriptionJob DescriptionCompany Description:Holtec International is an advantage leading manufacturing company specializing in precision machining and fabrication. We are currently seeking experienced CNC Machinists to join our team. If you are a skilled professional with a strong background in CNC machining, blueprint reading, and setup operations, we...

  • CNC Machinist- Relocation Assistance Provided

    1 week ago

    Camden, United States Holtec International Full time

    Job DescriptionJob DescriptionCompany Description:Holtec International is an advantage leading manufacturing company specializing in precision machining and fabrication. We are currently seeking experienced CNC Machinists to join our team. If you are a skilled professional with a strong background in CNC machining, blueprint reading, and setup operations, we...