General Technician Assembly or Process Technician PrePaint

4 weeks ago

Tulsa, United States Navistar, Inc. Full time

Position OverviewThis requisition is for Contractor Conversion purposes.ResponsibilitiesGeneral Technician:
Prepare weld area appropriately to result in good weld penetration and meets structural integrity criteria
Collaborate with peers to accomplish projects or tasks
Develop and maintain relationships with peers and customers
Participate in group discussions and meetings
Perform checks on product and process
Ensure material integrity by routine inspection by following established procedures and quality processes and specifications
Ensure piece and work output meets specifications
Sort and separate defective materials and parts
Assemble/disassemble and fasten/unfasten parts larger than hand using tools; fit, bolt, weld, cut or otherwise connect components and equipment according to specifications
Assemble/disassemble small parts not requiring precision alignment or small tolerances
Assemble/disassemble small parts requiring precision alignment and small tolerances
Performs any other assigned task

Process Technician Pre-Paint:
Prepare paint area appropriately to result in good paint application that meets paint specification criteria
Paint components using appropriate spray techniques
Knowledgeable on how to adjust the spray equipment
Prep the bus to mask the areas that they will paint
Knowledgeable of proper spray techniques
Mix paints and work with solvents
Identify paint defects
Maintain their equipment
Knowledgeable on basic safety precautions when handling paints/solvents
Perform tasks in full gear of painter's personal protective equipment (PPE)
Perform any other assigned tasks

Minimum RequirementsNone
Additional Requirements
Qualified candidates, excluding current International Motors employees, must be legally authorized on an unrestricted basis (US Citizen, Legal Permanent Resident, Refugee or Asylee) to be employed in the United States. International Motors does not anticipate providing employment related work sponsorship for this position (e.g., H-1B status)
Ability to read and follow work procedures
Ability to work in areas that are hard to reach and in awkward positions
Ability to stand, crouch, climb 10 hours per day (in addition to overtime) in a non-climate controlled manufacturing environment with intermittent noise, fumes, solvents and paints
Ability to lift up to 35 pounds on a regular basis and work around moving vehicles, on ladders and scaffolding, below ground level, with vibratory tools
This position is safety sensitive and may involve the operation of vehicles, operation of equipment, and/or involve work with power tools, or handling of hazardous materials, that could result in injury or damage to person/property/manufacturing process

Desired SkillsGeneral Technician:
Experience using hand tools and power tools including, but not limited to: wrenches, clamps, benders, box knives, power drills, and fastening tools
Ability to achieve high performance goals with changing work directions
Experience with body repair

Process Technician Pre-Paint:
At least a year of automotive hands on experience
At least 3 months of automotive painting work
Ability to achieve high performance goals with changing work directions
Good mechanical aptitude

Company OverviewABOUT INTERNATIONAL AND NFCFrom a one-man company built on the world-changing invention of the McCormick reaper in 1831, to the 15,000-person-strong company we are today, few companies can lay claim to a history like International. Based in Lisle, Illinois, International Motors, LLC* creates solutions that deliver greater uptime and productivity to our customers throughout the full operation of our commercial vehicles. We build International® trucks and engines and IC Bus® school and commercial buses that are as tough and as smart as the people who drive them. We also develop Fleetrite® aftermarket parts. In everything we do, our vision is to accelerate the impact of sustainable mobility to create the cleaner, safer world we all deserve. As of 2021, we joined Scania, MAN and Volkswagen Truck & Bus in TRATON GROUP, a global champion of the truck and transport services industry. To learn more, visit www.International.com.NFC is the captive finance company for International that is the provider of InternationalTM Financial services.*International Motors, LLC is d/b/a International Motors USA in Illinois, Missouri, New Jersey, Ohio, Texas, and Utah.EEO StatementInternational is an Equal Opportunity Employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics.If you are a qualified individual with a disability and require a reasonable accommodation to access the online application system or participate in the interview process due to your disability, please email [email protected] to request assistance. Kindly specify Job Requisition Number / Job Title and Location in response. Otherwise, your request may not be considered.

  • Assembly Technician

    3 weeks ago

    Tulsa, Oklahoma, United States Navistar Full time

    Job Title: General Technician Assembly or Process Technician PrePaintAt Navistar, we are seeking a skilled General Technician Assembly or Process Technician PrePaint to join our team. As a key member of our manufacturing team, you will be responsible for ensuring the quality and efficiency of our production processes.Responsibilities:General Technician:...

  • Assembly Technician

    3 weeks ago

    Tulsa, Oklahoma, United States International UTC of Columbus Full time

    Job Title: General Technician Assembly or Process Technician PrePaintJob Summary:We are seeking a skilled General Technician or Process Technician PrePaint to join our team at International Motors, LLC. As a key member of our production team, you will be responsible for ensuring the quality and efficiency of our manufacturing...

  • General Technician Assembly or Process Technician PrePaint

    1 month ago

    Tulsa, United States Navistar Full time

    Position Overview: This requisition is for Contractor Conversion purposes. Responsibilities: General Technician: Prepare weld area appropriately to result in good weld penetration and meets structural integrity criteria Collaborate with peers to accomplish projects or tasks Develop and maintain relationships with peers and customers Participate in group...

  • General Technician Assembly or Process Technician PrePaint

    1 month ago

    Tulsa, United States Navistar Full time

    Position OverviewThis requisition is for Contractor Conversion purposes.Responsibilities General Technician: Prepare weld area appropriately to result in good weld penetration and meets structural integrity criteria Collaborate with peers to accomplish projects or tasks Develop and maintain relationships with peers and customers Participate in group...

  • General Technician Assembly or Process Technician PrePaint

    4 weeks ago

    Tulsa, United States Navistar Full time

    Position OverviewThis requisition is for Contractor Conversion purposes.Responsibilities General Technician: Prepare weld area appropriately to result in good weld penetration and meets structural integrity criteria Collaborate with peers to accomplish projects or tasks Develop and maintain relationships with peers and customers Participate in group...

  • General Technician Assembly or Process Technician PrePaint

    3 weeks ago

    Tulsa, United States Navistar Full time

    Position OverviewThis requisition is for Contractor Conversion purposes.ResponsibilitiesGeneral Technician: Prepare weld area appropriately to result in good weld penetration and meets structural integrity criteria Collaborate with peers to accomplish projects or tasks Develop and maintain relationships with peers and customers Participate in group...

  • General Technician Assembly or Process Technician PrePaint

    3 weeks ago

    Tulsa, United States Navistar Full time

    Position OverviewThis requisition is for Contractor Conversion purposes.ResponsibilitiesGeneral Technician: Prepare weld area appropriately to result in good weld penetration and meets structural integrity criteria Collaborate with peers to accomplish projects or tasks Develop and maintain relationships with peers and customers Participate in group...

  • Mechanical Assembly Technician

    2 weeks ago

    Tulsa, United States MCELROY MANUFACTURING Full time

    McElroy Mechanical Assembly Technicians generally work in our climate-controlled Fulton or Mingo Facility where we assemble all our machines. In addition to great pay, a full stack of benefits and a sign on bonus, McElroy Assembly Technicians receive paid on the job training. They work with the mechanical and hydraulic components such as diesel engines,...

  • Assembly Technician

    4 days ago

    Tulsa, Oklahoma, United States RADIANT Full time

    Job Summary:At RADIANT, we are seeking a skilled Assembly Technician to join our team. As an Assembly Technician, you will be responsible for assembling and testing Artificial Lift products under strict supervision. Your key responsibilities will include reviewing work orders, acquiring parts for new product assembly, and coordinating with manufacturing as...

  • Assembly Technician

    1 month ago

    Tulsa, Oklahoma, United States Crusoe Full time

    About Crusoe EnergyCrusoe Energy is a pioneering company that aims to unlock value in stranded energy resources through the power of computation. By co-locating mobile data centers with stranded energy resources, Crusoe delivers low-cost, carbon-negative distributed computing solutions.Job DescriptionWe are seeking a skilled Assembly Technician to join our...

  • Assembly Technician

    1 week ago

    Tulsa, Oklahoma, United States HSM Solutions Full time

    Job SummaryWe are seeking a skilled Assembly Technician to join our team at HSM Solutions. As an Assembly Technician, you will be responsible for assembling and testing various components and products. This is a great opportunity to work in a fast-paced manufacturing environment and contribute to the production of high-quality products.Key...

  • Assembly Technician

    3 weeks ago

    Tulsa, Oklahoma, United States Lloyd Richards Personnel Services Full time

    Assembly TechnicianWe are seeking a skilled Assembly Technician to join our team at Lloyd Richards Personnel Services. As an Assembly Technician, you will be responsible for assembling large and heavy parts using hand tools or air tools.Key Responsibilities:Assemble large and heavy partsUse hand tools or air toolsBasic math and reading skills requiredRead...

  • Assembly Technicians

    3 weeks ago

    Tulsa, Oklahoma, United States Lloyd Richards Personnel Services Full time

    Job SummaryLloyd Richards Personnel Services is seeking skilled Assembly Technicians to join our team. As an Assembly Technician, you will be responsible for assembling large and heavy parts, using hand tools or air tools, and performing basic math calculations.Key Responsibilities:Assemble large and heavy parts using hand tools or air toolsPerform basic...

  • Assembly Technician

    1 month ago

    Tulsa, Oklahoma, United States Barracuda Staffing Full time

    Assembly Technician Job DescriptionWe are seeking a skilled Assembly Technician to join our team at Barracuda Staffing. As an Assembly Technician, you will play a crucial role in assembling equipment from fabricated and welded components.Key Responsibilities:Assemble equipment from fabricated and welded componentsWork in a fast-paced manufacturing...

  • Assembly Technician

    3 weeks ago

    Tulsa, Oklahoma, United States Lloyd Richards Personnel Services Full time

    Assembly TechnicianLloyd Richards Personnel Services is seeking a skilled Assembly Technician to join our team. As an Assembly Technician, you will be responsible for reading and interpreting piping and instrumentation diagram drawings and blueprints, cutting and threading pipe, and completing tasks as directed by manufacturing schedules with minimum...

  • Assembly Technician

    4 days ago

    Tulsa, Oklahoma, United States International UTC of Columbus Full time

    Job Summary:We are seeking a skilled Assembly Technician to join our team at International UTC of Columbus. As an Assembly Technician, you will be responsible for preparing weld areas, collaborating with peers, and ensuring material integrity.Key Responsibilities:Prepare weld areas to ensure good weld penetration and structural integrityCollaborate with...

  • Assembly Technician

    1 week ago

    Tulsa, Oklahoma, United States Stand-By Personnel Full time

    Job Summary:Stand-By Personnel is seeking a skilled Assembly Technician to join our team. As an Assembly Technician, you will be responsible for the assembly, fabrication, and maintenance of parts and products. This role requires strong attention to detail and the ability to interpret blueprints and schematics.Key Responsibilities: Assemble and fabricate...

  • Assembly Technicians

    2 weeks ago

    Tulsa, Oklahoma, United States Lloyd Richards Personnel Services Full time

    Assembly TechnicianAt Lloyd Richards Personnel Services, we are seeking a skilled Assembly Technician to join our team.Key Responsibilities:Assemble large and heavy parts using hand tools or air toolsOperate cranes, hoists, and grindersBlast parts to prepare for assemblyRead and interpret blueprints, operating instructions, and procedure manualsPerform basic...

  • Assembly Technician

    1 month ago

    Tulsa, Oklahoma, United States Piedmont Technical College Full time

    Job Title: Assembly TechnicianWe are seeking a skilled Assembly Technician to join our team at Piedmont Technical College. As an Assembly Technician, you will be responsible for assembling wire harnesses, final assembled products, and sub-assemblies.Key Responsibilities:Follow established safety and environmental rules and regulations.Read and interpret...

  • Assembly Technician

    2 weeks ago

    Tulsa, Oklahoma, United States Stand-By Personnel Full time

    Job Summary:Stand-By Personnel is seeking a skilled Assembly Technician to join our team. As an Assembly Technician, you will be responsible for assembling and fabricating parts and products, as well as performing maintenance and repair tasks.Key Responsibilities:• Assemble and fabricate parts and products according to blueprints and schematics• Perform...