CNC Technician

3 weeks ago

New Hampton, United States ATEK Companies, LLC Full time

SUMMARY: CNC technicians are responsible for operating computer numerically controlled (CNC) machines. The machines are used to create a wide range of products, from car parts to furniture and even medical devices. CNC technicians work closely with engineers and other designers to ensure that the CNC machine is creating the desired products as efficiently as possible.WAGE TYPE: HourlyFLSA Exemption: Non-ExemptESSENTIAL DUTIES AND RESPONSIBILITIES:
Communicating with supervisors regarding work progress, problems, or other issues that arise during the workday
Reading blueprints or other instructions to determine how to operate machinery or equipment
Monitoring machine performance to ensure that it is working properly and that no damage has been done to it
Perform maintenance on equipment to ensure that it continues to run smoothly
Using computers to design or modify products based on customers' request or company policies
Operating and monitoring computerized controls to ensure that machines are performing tasks correctly
Monitoring production rates and adjusting equipment setting to ensure that output goals are met
Inspecting materials to ensure that they meet specifications for size, shape, and consistency
Repairing equipment when necessary, including replacing worn parts, lubricating bearings, and repairing electrical components
Read and interpreting technical blueprints and design models
Load raw materials into the CNC machine
Inputting the product design into the computer modeling software
Choosing and loading the correct cutting tools for the job
Adjusting machine settings to the desired product specifications
Troubleshooting issues during the manufacturing process
Completing quality control tests during the manufacturing stage and on the final product
Cleaning and maintaining the machine
Training new staff on machine operation procedures

ORGANIZATIONAL STRUCTURE:
Reports to: Maintenance Manager
Supervises: None

QUALIFICATIONS: The requirements listed below are representative of the knowledge, skill and/or ability required. Equivalent combinations of education and experience may be substituted for the expected levels of education and experience required.Education and/or Experience:
High school diploma or GED
Previous work experience as a CNC programmer
Ability to read and interpret design blueprints
Extensive experience with computer modeling software
Strong attention to detail
Ability to work independently and stick to a deadline
Ability to stand for extended periods
Ability to lift heavy objects
Ability to work after-hours when required

Preferred Skills
Experience in aluminum material on a HMC CNC preferred (Makino and Haas)
Two years CNC technician experience
Experience with HCM operation and manual CNC programming experience preferred
Minimum 2 years metal cutting experience preferred

Required Skills:
Must be able to read, write, and comprehend the English language
Ability to work independently, to make decisions, and to keep team members updated on progress as required
Strong oral and written communication skills required, including training of new employees
MS Office® Suite proficiency
Problem solving and data analysis skills

Working Conditions:Will have regular exposure to foundry environment including: dust, heat, fumes and noise

  • CNC Technician

    3 weeks ago

    New Hampton, United States BuildSubmarines.com Full time

    SUMMARY: CNC technicians are responsible for operating computer numerically controlled (CNC) machines. The machines are used to create a wide range of products, from car parts to furniture and even medical devices. CNC technicians work closely with engineers and other designers to ensure that the CNC machine is creating the desired products as efficiently as...

  • CNC Technician

    5 days ago

    New Hampton, IA, 50659, Chickasaw County, IA, United States ATEK Companies, LLC Full time

    SUMMARY: CNC technicians are responsible for operating computer numerically controlled (CNC) machines. The machines are used to create a wide range of products, from car parts to furniture and even medical devices. CNC technicians work closely with engineers and other designers to ensure that the CNC machine is creating the desired products as efficiently as...

  • CNC Lathe Setup Technician

    3 weeks ago

    New Britain, United States Creed Monarch Full time

    CNC LATHE SET-UP & OPERATION POSITIONWe are currently seeking an experienced CNC Lathe Setup Technician to assist in the setup and programming of multi-axis CNC lathes or Swiss-style machines. The ideal candidate will have a strong understanding of CNC lathe operations and be capable of setting up machines to produce precision metal components according to...

  • Maintenance Technician

    4 weeks ago

    New Hampton, United States Knowhirematch Full time

    Job DescriptionJob DescriptionJob Title: Maintenance TechnicianLocation: New Hampton, IowaSalary: $22-38/hourJob Summary of the Maintenance Technician: The Maintenance Technician position is responsible to install, troubleshoot, repair and maintain production and facility equipment according to safety, predictive and productive maintenance systems and...

  • Maintenance Technician

    3 weeks ago

    New Hampton, Iowa, United States Knowhirematch Full time

    Job Title: Maintenance Technician Location: New Hampton, Iowa Salary: $22-38/hour Job Summary of the Maintenance Technician: The Maintenance Technician position is responsible to install, troubleshoot, repair and maintain production and facility equipment according to safety, predictive and productive maintenance systems and processes to support the...

  • Diamond Turning/CNC Operators

    3 weeks ago

    Keene, New Hampshire, United States KLM Careers Full time

    Diamond Turning/CNC Operators Keene, NH Must be a US Citizen or Green Card holder. The end client is looking for staff for their Keene NH Location and have asked us to source for this. Local candidates that can work in Keene NH only. POSITION PURPOSE: DT ...

  • 2-Axis Lathe Operator

    4 weeks ago

    New Berlin, United States Path Engineering Full time

    Job DescriptionJob DescriptionRoleAs a CNC Lathe Operator (also known as CNC Machine Operator, CNC Technician), you'll be responsible for setting up and operating CNC lathes, interpreting complex drawings, and working from prototype sketches, electronic files, and verbal instructions. You'll also handle a variety of general machine shop equipment and...

  • Maintenance Technician

    4 weeks ago

    New Holstein, United States Metko Full time

    Job DescriptionJob DescriptionSalary: $20-$28/hourMetko, Inc., a local leader and family-owned business in the custom metal and tank fabrication industry is seeking to directly hire a full-time Maintenance Technician for a 2nd shift opening in its New Holstein, WI, facility.*** PLEASE NOTE: 2nd shift hours are from 2:30 PM to 10:30 PM Monday through...

  • Metrology Technician

    4 days ago

    Claremont, New Hampshire, United States Canam Full time

    Job Description Your life at Canam Bridges As a Metrologist at Canam Bridges, you will be responsible for taking factory measurements using “Station Total” and “Laser Tracker Faro” surveying tools. Your analytical mind will allow you to use your 3D vision superpowers to complete dimensional measurements. To break your routine, you will alternate...

  • Sr Manufacturing Engineer

    3 weeks ago

    Elma, New York, United States Knowhirematch Full time

    Join us on an exciting career journey as we search for Senior Manufacturing Engineers who are not just engineers, but hands-on problem solvers. If you have experience as a Manufacturing Engineer and possess CAD/CAM CNC Programming skills (preferably NX), along with expertise in CNC Milling machine processing, tooling, and programming, especially in 4 and 5...

  • Re:Build New Kensington Expression of Interest

    2 weeks ago

    New Kensington, United States Re:Build Manufacturing Full time

    Re:Build Manufacturing announces it is establishing a 175,000 square-foot regional manufacturing headquarters at the New Kensington Advanced Manufacturing Park located along the Allegheny River in New Kensington and Arnold, Pennsylvania. The 66-acre park, which encompasses 1.29 million square feet of industrial and office space, is located 18 miles northeast...

  • Robotic Test Engineer

    2 weeks ago

    New York, United States Renovate Robotics Full time

    About Renovate Robotics:Renovate Robotics is an early stage startup backed by top robotics and climate investors. We're building robots that install materials on residential roofs - our robots empower roofing contractors to work safer and more productively. If we succeed: hard working people will no longer die while installing roofs, rooftop solar will be...

  • Robotic Test Engineer

    2 weeks ago

    New York, United States Renovate Robotics Full time

    About Renovate Robotics:Renovate Robotics is an early stage startup backed by top robotics and climate investors. We're building robots that install materials on residential roofs - our robots empower roofing contractors to work safer and more productively. If we succeed: hard working people will no longer die while installing roofs, rooftop solar will be...

  • Robotic Test Engineer

    2 weeks ago

    New York, United States Renovate Robotics Full time

    About Renovate Robotics: Renovate Robotics is an early stage startup backed by top robotics and climate investors. We're building robots that install materials on residential roofs - our robots empower roofing contractors to work safer and more productively. If we succeed: hard working people will no longer die while installing roofs, rooftop solar will be...

  • Metal Fabrication Shop Manager

    2 days ago

    New Haven, United States Yale University Full time

    Essential Duties 1. Supervises the day-to-day activities of support staff. 2. Assesses and resolves or escalates problems arising within unit. 3. Assists in the development of policies and procedures in support of unit. 4. Assists in planning for work unit needs. 5. Participates in unit budget planning. 6. Evaluates work requests to determine if they are...