Maintenance Tech
2 weeks ago
Maintenance Tech The Maintenance Tech performs a wide variety of tasks involved in the plant's machine and facility maintenance. This person will coordinate outside contractors for some tasks, but will be capable of performing the vast majority of the maintenance and repair. This is a first shift / hourly / non-exempt position reporting to the Operations Supervisor. Standard plant operations are Monday-through-Thursday 10-hour work days. Primary Duties & Responsibilities: Perform diversified duties to install, repair, maintain and service plant mechanical equipment. Coordinate with Electricians to accomplish various projects. Install level and align plant machinery; connect mechanical piping controls and gauges; perform necessary plumbing. Perform a variety of welding, brazing, cutting and soldering operations. Accomplish structural concrete and form work; perform masonry as related to ovens, chimney, wall, etc. Make roof repairs; install new roofing. Make motor vehicle repairs. Perform ordinary carpentry work. Be competent in general sheet metal work; perform complex duct system erections; perform insulation work on ducts and pipes. Have a working knowledge of all plant equipment including pumps, burners, fans, bearings, bushings, gear boxes, air cylinders, dust collectors, vacuum pumps, compressors, waterblast equipment, and pneumatic controls. Have a working knowledge of refrigeration, machinery controls and air conditioners. Be able to install, maintain and repair ordinary lighting, power circuits and simple control systems. Assist Electricians in more complex electrical projects. Operate ordinary machine tools; use common precision measuring equipment. Perform all phases of maintenance using a good general knowledge of various crafts and trades. Be available and willing to perform off-hours and overtime work. Follow prescribed safety regulations; understand and be able to carry out National Electric Code, OSHA regulations and insurance recommendations. Maintain work areas and equipment in a safe and clean condition. Act as Hazmat Responder. Must participate in required training, medical monitoring, safety, and health evaluations and programs. Must wear required Personal Protective Equipment (PPE) in all designated areas of facility. *Perform all physical functions of position; standing, stooping, bending, sitting, walking, twisting, kneeling, turning and lifting of materials up to 35 lbs. Work overtime as needed. Perform other duties as assigned. Knowledge and Skills: Use simple arithmetic including decimals and fractions. Simple use of formulas, charts, tables, drawings, specifications, schedules or similar information. Use precision measuring instruments, test equipment or other devices where interpretation is required. Ability to work effectively with others in a team environment. Required to twist, turn, kneel, stoop, bend, and use hands to handle or feel. Capable of lifting/moving 35 pounds Experience and Education: U.S. Person status required GED or High School diploma preferred but not required Minimum of 5 years relevant experience Location Profile: Located in Port Saint Lucie, Florida, Atlantic Precision Inc (API) is a premier Aerospace Machining & Build facility with a talented work force using the latest 3D printing metal and additive manufacturing technologies in its 50,000 square-foot facility. With decades of experience, API is trusted by OEMs in commercial aviation, military aviation, power generation and the marine industry to produce quality parts for both prototypes and production requirements.
-
Maintenance Tech
2 weeks ago
Port St Lucie, United States Precision Castparts Corp Full timeMaintenance Tech The Maintenance Tech performs a wide variety of tasks involved in the plant's machine and facility maintenance. This person will coordinate outside contractors for some tasks, but will be capable of performing the vast majority of the maintenance and repair. This is a first shift / hourly / non-exempt position reporting to the Operations...
-
Maintenance Tech
2 weeks ago
Port St Lucie, FL, United States Precision Castparts Corp Full timeCountryUnited States of AmericaState / CountyFloridaCityPort St. LucieDivisionStructuralsCompanyAtlantic PrecisionFunctionMaintenanceWorkplace TypeOn-SitePosition typeFull TimeOpportunity ID19493 Company ProfileWith more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large,...
-
Maintenance Tech
4 days ago
Port St Lucie, FL, United States Precision Castparts Corp Full timeCountryUnited States of AmericaState / CountyFloridaCityPort St. LucieDivisionStructuralsCompanyAtlantic PrecisionFunctionMaintenanceWorkplace TypeOn-SitePosition typeFull TimeOpportunity ID19493 Company ProfileWith more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large,...
-
Maintenance Tech
5 days ago
Port Saint Lucie, Florida, United States Precision CastParts Full time $40,000 - $80,000 per yearMaintenance TechCountryUnited States of AmericaState / CountyFloridaCityPort St. LucieDivisionStructuralsCompanyAtlantic PrecisionFunctionMaintenanceWorkplace TypeOn-SitePosition typeFull TimeOpportunity ID19493Company ProfileWith more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in...
-
Maintenance Tech
3 days ago
Port Saint Lucie, Florida, United States PCC Talent Acquisition Portal Full time $40,000 - $80,000 per yearPosition Summary: The Maintenance Tech performs a wide variety of tasks involved in the plant's machine and facility maintenance. This person will coordinate outside contractors for some tasks, but will be capable of performing the vast majority of the maintenance and repair.This is a first shift / hourly / non-exempt position reporting to the Operations...
-
Maintenance Tech
2 days ago
St Cloud, MN, United States Global Channel Management Full timeAbout the job Maintenance Tech Maintenance Tech needs experience in highly automated manufacturing, lean manufacturing/continuous flow operations Maintenance Tech requires: 1-12 hrs Day Shift 1-12 hrs Night Shift 1- 8 hrs night Shift 1- 8 hrs Group Lead 3rd Shift Experience in highly automated manufacturing, lean manufacturing/continuous flow operations ...
-
Maintenance Tech
2 weeks ago
St Cloud, MN, United States Global Channel Management Full timeAbout the job Maintenance Tech Maintenance Tech needs experience in highly automated manufacturing, lean manufacturing/continuous flow operations Maintenance Tech requires: 1-12 hrs Day Shift 1-12 hrs Night Shift 1- 8 hrs night Shift 1- 8 hrs Group Lead 3rd Shift Experience in highly automated manufacturing, lean manufacturing/continuous flow operations ...
-
Maintenance Tech
6 days ago
St Cloud, MN, United States Global Channel Management Full timeAbout the job Maintenance Tech Maintenance Tech needs experience in highly automated manufacturing, lean manufacturing/continuous flow operations Maintenance Tech requires: 1-12 hrs Day Shift 1-12 hrs Night Shift 1- 8 hrs night Shift 1- 8 hrs Group Lead 3rd Shift Experience in highly automated manufacturing, lean manufacturing/continuous flow operations ...
-
Tech - IR Tech
4 days ago
Port St Lucie, FL, United States HCA Saint Lucie Medical Center Full timeDetailsClient Name HCA Saint Lucie Medical Center Job Type Travel Offering Allied Profession Tech Specialty IR Tech Job ID 34675254 Job Title Tech - IR Tech Weekly Pay $2306.0 Shift DetailsShift 8 hour days Scheduled Hours 40 Job Order DetailsStart Date 11/17/2025 End Date 02/16/2026 Duration 13 Week(s) Job Description An Interventional Radiology (IR)...
-
Tech - Cath Lab Tech
2 weeks ago
Port St. Lucie, United States Cleveland Clinic Tradition Hospital Full timeDetailsClient Name Cleveland Clinic Tradition Hospital Job Type Travel Offering Allied Profession Tech Specialty Cath Lab Tech Job ID 34881784 Job Title Tech - Cath Lab Tech Weekly Pay $2366.0 Shift DetailsShift 10 hour days Scheduled Hours 40 Job Order DetailsStart Date 12/01/2025 End Date 03/02/2026 Duration 13 Week(s) Job Description A Cath Lab Technician...
