Electrical Fabrication Test Technician

3 days ago

Orlando, United States Nesco Resource Full time
Job Description:

All candidates should make sure to read the following job description and information carefully before applying.
Electro-Mechanical Engineering Aide needed to fulfill requirements for program designs and fabricate equipment that will be used in the development and manufacture of tactical hardware.
We are seeking career individuals who will be fabricating electronic, electro-mechanical assemblies (and sub-assemblies) to Engineering drawings.
Fabrication will include the ability to place and solder components on circuit cards and sub-assemblies.
The fabrication of wiring harnesses will require connector pinning, de-pinning and applying mounting hardware. In addition, these lower-level assemblies are to be built-up into single, or multi-bay cabinet assemblies, for the delivery to Engineering or Manufacturing Production areas.
This position will provide the opportunity for the candidate to work as individual contributor, in a team environment. This would include collaborating with Engineers, and other members of the Fabrication team including other Fabricators, Draftsmen, Procurement, and Quality Inspectors.
The position will be responsible for reading, interpreting, and occasionally correcting engineering drawings/schematics. Daily activity would include not only a fast-paced fabrication environment, but it would also include using several computer-based programs that will update job status, Quality Inspections, and Engineering changes.
Required Qualifications:
At least 3 years of experience in electrical fabrication (cable and harness, SMT board, test equipment, etc.)
At least 3 years of experience with the interpretation of engineering drawings, schematics, and test and repair procedures
At least 3 years of experience with fabricate electrical test equipment designs from a blueprint of the layout, schematic, bill of material, and engineering practices manual as guidelines.
High school diploma
Ability to communicate issues with the design and or the process requirements to management and or design engineers.
Strong knowledge and experience in repairs of electro-mechanical assemblies
Knowledge of basic avionics and electronics
Knowledge of troubleshooting and fault isolation of components using general purpose and/or automated test equipment
Knowledge of automated and/or general-purpose test equipment (oscilloscopes, multi-meters, network analyzers and waveform generators)
Familiarity with industrial standards, military specifications, and industry processes
Excellent written and verbal communication skills
Ability to lift 35 pounds.
Ability to adapt to dynamic and frequently changing customer requirements
Ability to understand policies and procedures for the control of Government property
Ability to work with hazardous materials
Ability to properly safety wire assemblies and connectors
Ability to solder and repair cables and harnesses
Basic knowledge of Microsoft Office suite of programs
Desired Skills:
Knowledge of solder certification to J-STD-001, IPC-7711/IPC-7721
Knowledge of fault isolation for electro-mechanical components
Knowledge of concepts for hardware repair
Experience with CCA component rework and repair
Rework experience with BGAs and electrical maintenance and rework
Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

  • Electrical Fabrication Technician

    4 weeks ago

    Orlando, Florida, United States NESCO Inc Full time

    Job Title: Electrical Fabrication TechnicianJob Summary:NESCO Inc is seeking an experienced Electrical Fabrication Technician to join our team. As an Electrical Fabrication Technician, you will be responsible for fabricating electronic, electro-mechanical assemblies and sub-assemblies to Engineering drawings.Key Responsibilities:Fabricate electronic,...

  • Electrical Fabrication Test Technician

    4 days ago

    Orlando, United States Nesco Resource Full time

    Job Description:All candidates should make sure to read the following job description and information carefully before applying. Electro-Mechanical Engineering Aide needed to fulfill requirements for program designs and fabricate equipment that will be used in the development and manufacture of tactical hardware. We are seeking career individuals who will...

  • Electrical Fabrication Test Technician

    2 weeks ago

    orlando, United States Nesco Resource Full time

    Job Description: Electro-Mechanical Engineering Aide needed to fulfill requirements for program designs and fabricate equipment that will be used in the development and manufacture of tactical hardware. We are seeking career individuals who will be fabricating electronic, electro-mechanical assemblies (and sub-assemblies) to Engineering drawings....

  • Electrical Fabrication Specialist

    1 month ago

    Orlando, Florida, United States Butler Aerospace and Defense Full time

    Job Summary:We are seeking a skilled Electrical Fabrication Specialist to join our team at Butler America Aerospace, LLC. This individual will be responsible for fabricating test equipment that will be used in the development and manufacture of tactical hardware.Key Responsibilities:* Fabricate test equipment designs from blueprints, schematics, and...

  • Electrical Technician

    1 month ago

    Orlando, Florida, United States CDW Electrical Services Full time

    Job SummaryWe are seeking a highly skilled and experienced Electrical Technician to join our team at CDW Electrical Services. As a key member of our team, you will be responsible for performing a variety of electrical tasks, including troubleshooting, repairing, and installing electrical systems.Key Responsibilities:Perform effective troubleshooting to...

  • Electrical Systems Technician

    4 weeks ago

    Orlando, Florida, United States Cenergy International Full time

    Job Summary: We are seeking a highly skilled Electrical Systems Technician to join our team at Cenergy International. As an Electrical Systems Technician, you will be responsible for connecting instrumentation to a data acquisition system with signal conditioning equipment.Key Responsibilities:Connecting instrumentation to a data acquisition system with...

  • Nesco Resource | Electrical Fabrication Test Technician

    14 hours ago

    Orlando, FL, United States Nesco Resource Full time

    Job Description: Electro-Mechanical Engineering Aide needed to fulfill requirements for program designs and fabricate equipment that will be used in the development and manufacture of tactical hardware. We are seeking career individuals who will be fabricating electronic, electro-mechanical assemblies (and sub-assemblies) to Engineering drawings....

  • Electronics Fabricator

    2 weeks ago

    Orlando, Florida, United States Butler Aerospace & Defense Full time

    Job Summary:As a skilled Technician, you will be responsible for performing a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. This includes constructing, troubleshooting, calibrating, adjusting, testing, diagnosing, and maintaining equipment, components, devices, or systems.Key Responsibilities:Works from schematics,...

  • Technician

    2 months ago

    Orlando, United States Butler Aerospace and Defense Full time

    TechnicianLocation: Orlando, FLJob ID: #69970Pay Range: $25-31This position will fabricate test equipment that will be used in the development and manufacture of tactical hardware. The position will be responsible for reading, interpreting, and occasionally correcting engineering drawings/schematics. The test equipment fabricated can include test sets, test...

  • Technician

    2 months ago

    Orlando, United States LanceSoft, Inc. Full time

    Role: TechnicianLocation: Orlando, FL (Onsite)Duration: 12 months (Possible Extension)Shift: 4/10 Schedule – 1st ShiftPay Range: $25 – $31 per hour on W2 without any benefits. Job Description:This position will fabricate test equipment that will be used in the development and manufacture of tactical hardware.The position will be responsible for reading,...

  • Technician

    1 month ago

    orlando, United States LanceSoft, Inc. Full time

    Role: TechnicianLocation: Orlando, FL (Onsite)Duration: 12 months (Possible Extension)Shift: 4/10 Schedule – 1st ShiftPay Range: $25 – $31 per hour on W2 without any benefits. Job Description:This position will fabricate test equipment that will be used in the development and manufacture of tactical hardware.The position will be responsible for reading,...

  • Technician

    5 months ago

    Orlando, United States Butler Aerospace & Defense Full time

    TechnicianLocation: Orlando, FLJob ID: #69428Pay Range: $25-31Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems.Works from schematics, engineering drawings and written or verbal...

  • Specialist, Electrical Engineer

    2 months ago

    Orlando, United States L3Harris Technologies Full time

    Job Title: Specialist, Electrical Engineer (Cable Engineer) Job ID: 15991 Job Location: Orlando, FL Job Schedule: 9/80: Employees work 9 out of every 14 days – totaling 80 hours worked – and have every other Friday off Job Description: L3Harris is seeking a highly skilled and motivated Networks Engineer to join our Electrical Engineering...

  • Electrical Systems Technician

    4 weeks ago

    Orlando, Florida, United States Universal Orlando Full time

    Job Summary:As an Electrical Systems Technician at Universal Orlando, you will be responsible for the preventative and corrective maintenance, troubleshooting, and repair of animation, special effects, and ride/show control and electrical systems. Your expertise will be essential in ensuring the smooth operation of our attractions and maintaining the highest...

  • Electrical Engineer

    4 weeks ago

    Orlando, Florida, United States L3Harris Full time

    Job Title:Electrical Engineer - Cable Design SpecialistL3Harris is seeking a highly skilled Networks Engineer to join our Electrical Engineering Coleman Aerospace team in Orlando, FL.The ideal candidate will possess a strong foundation in electrical engineering principles, with a focus on system interconnects, cable design, fabrication, and testing.This role...

  • Electrical Systems Technician

    4 weeks ago

    Orlando, Florida, United States Universal Orlando Full time

    Job Summary:Universal Orlando is seeking a skilled Electrical Systems Technician to join our team. As a key member of our maintenance team, you will be responsible for the inspection, troubleshooting, and repair of animation, special effects, and ride and show control systems resort-wide.Key Responsibilities:Perform preventative and predictive maintenance as...

  • Electrical Test Engineer

    3 weeks ago

    Orlando, United States Intellectt Inc Full time

    ELECTRICAL HW TEST ENGINEERORLANDO, FL (ONSITE) The Electrical HW Test Engineer will be a member of the Product Development staff and be involved in the design, development, and maintenance of new MRI compatible products. Able to analyze and debug mixed signal PCA in embedded battery operating systems. Familiar with low-level analog front-end signal...

  • Electrical Test Engineer

    2 weeks ago

    Orlando, United States Intellectt Inc Full time

    ELECTRICAL HW TEST ENGINEERORLANDO, FL (ONSITE)The Electrical HW Test Engineer will be a member of the Product Development staff and be involved in the design, development, and maintenance of new MRI compatible products. Able to analyze and debug mixed signal PCA in embedded battery operating systems. Familiar with low-level analog front-end signal...

  • Electrical Test Engineer

    2 weeks ago

    orlando, United States Intellectt Inc Full time

    ELECTRICAL HW TEST ENGINEERORLANDO, FL (ONSITE)The Electrical HW Test Engineer will be a member of the Product Development staff and be involved in the design, development, and maintenance of new MRI compatible products. Able to analyze and debug mixed signal PCA in embedded battery operating systems. Familiar with low-level analog front-end signal...

  • Electrical Installation Specialist

    1 month ago

    Orlando, Florida, United States Apollo Electrical Services, INC Full time

    About the RoleApollo Electrical Services, INC is seeking a skilled Electrical Installation Specialist to join our team. As a key member of our team, you will be responsible for installing, repairing, and maintaining electrical systems in commercial, retail, and industrial settings.Key Responsibilities:Install and repair electrical systems in accordance with...