Hardware Engineer III

3 weeks ago


Renton, United States Aditi Consulting Full time

Responsibilities:

Develop and own embedded controller design that interact with avionics systems (including sensors and electromechanical/electrohydraulic actuators).
Own the design, and the rugged electronic hardware assemblies across the entire product life cycle, from concept and requirements definition, design, analysis, prototyping, schematic capture, layout, design review, test/verification (power-on, functional / acceptance / qualification testing) and through release to production.
Support avionics controller architecture trade studies, analyses, performance characterization and specification, device selection, and controller roadmap direction.
Support controller risk analyses, failure modes effects and criticality analyses (FMECA), design for test/manufacture/cost (DFx), and root-cause analysis of test discrepancies.
Participate in program level technology development, mission assurance and safety initiatives, and avionics development process improvements.
Effectively communicate development status, risks, and challenges to management.



Qualifications:

Bachelor of Science in Electrical or Computer Engineering, or related disciplines
A breadth of understanding in electronics hardware development such as developing complex circuit cards, consumer electronics, wireless devices, or other advanced electronic commercial or aerospace products
Experience with analog, digital or mixed-signal circuit design, including analysis, simulation, test, troubleshooting, and part selection
Knowledge of signal integrity, power, grounding, and general board layout principles
Familiar with many of the following parts and their usage: ADCs, DACs, OpAmps, power supplies (linear, LDO, DC/DC), FPGAs, microcontrollers, processors, volatile memory (DDR), non-volatile memory (NAND, NOR, etc.), and MOSFETs
Knowledge of common communication methods, such as RS232, RS422, I2C, SPI, LVDS, Ethernet, CAN, or PCIe
Knowledge of radiation effects on electronics and how to apply this to designs targeting space applications



Desired:

Master of Science in Electrical or Computer Engineering, or related disciplines
Successful Candidates typically have 10+ years of experience (8+ years with Masters) in design, development, test, and operation of vehicle Avionics systems
Basic or better knowledge of motor controller design and operation
Experience evaluating work performed by subcontractors
Demonstrated experience designing high reliability safety-critical, Class 2/3 board assemblies; familiarity with IPC-A-600/610, DO-254 and similar standards





Compensation:

The pay rate range above is the base hourly pay range that Aditi Consulting reasonably expects to pay someone for this position (compensation may vary outside of this range depending on several factors, including but not limited to, a candidate’s qualifications, skills, competencies, competencies, competencies, competencies, experience, location and end client requirements).



Benefits and Ancillaries:

Medical, dental, vision, PTO benefits and ancillaries may be available for eligible Aditi Consulting employees and vary based on the plan options selected by the employee.


  • Hardware Engineer III

    3 weeks ago


    Renton, United States Aditi Consulting Full time

    Responsibilities: Develop and own embedded controller design that interact with avionics systems (including sensors and electromechanical/electrohydraulic actuators). Own the design, and the rugged electronic hardware assemblies across the entire product life cycle, from concept and requirements definition, design, analysis, prototyping, schematic capture,...

  • Hardware Engineer III

    2 weeks ago


    Renton, United States Aditi Consulting Full time

    Responsibilities: Develop and own embedded controller design that interact with avionics systems (including sensors and electromechanical/electrohydraulic actuators). Own the design, and the rugged electronic hardware assemblies across the entire product life cycle, from concept and requirements definition, design, analysis, prototyping, schematic capture,...


  • Renton, United States Aditi Consulting Full time

    Responsibilities: Ready to apply Before you do, make sure to read all the details pertaining to this job in the description below. Develop and own embedded controller design that interact with avionics systems (including sensors and electromechanical/electrohydraulic actuators). Own the design, and the rugged electronic hardware assemblies across the entire...

  • Hardware Engineer III

    3 weeks ago


    Renton, WA, United States Aditi Consulting Full time

    Responsibilities: Develop and own embedded controller design that interact with avionics systems (including sensors and electromechanical/electrohydraulic actuators). Own the design, and the rugged electronic hardware assemblies across the entire product life cycle, from concept and requirements definition, design, analysis, prototyping, schematic capture,...

  • Hardware Engineer III

    2 weeks ago


    Renton, United States Aditi Consulting Full time

    Responsibilities: Develop and own embedded controller design that interact with avionics systems (including sensors and electromechanical/electrohydraulic actuators). Own the design, and the rugged electronic hardware assemblies across the entire product life cycle, f...

  • Hardware Engineer III

    3 weeks ago


    renton, United States Aditi Consulting Full time

    Responsibilities:Develop and own embedded controller design that interact with avionics systems (including sensors and electromechanical/electrohydraulic actuators).Own the design, and the rugged electronic hardware assemblies across the entire product life cycle, f...


  • Renton, United States Aditi Consulting Full time

    Responsibilities: Develop and own embedded controller design that interact with avionics systems (including sensors and electromechanical/electrohydraulic actuators). Own the design, and the rugged electronic hardware assemblies across the entire product life cycle, f


  • Renton, United States Crossfire Consulting Full time

    Engineer - Electronics/Electrical Systems III Electronics/Electrical Systems Engineer Description: Electrical Design Engineer for PVC Controller, and Latching Valve Driver Also open to these locations: Denver, CO Phoenix, AZ- Electronics/Electrical Systems Engineer Responsibilities: Develop an embedded controller design that interacts with avionics systems...


  • Renton, United States Protingent Full time

    Job Title: Electrical Design Engineer IIILocations: Renton, WA; Denver, CO; Phoenix, AZEmployment Type: ContractPay Rate: Renton, WA - $80-$95/hrDenver, CO - $75-$90/hrPhoenix, AZ - $67-$80/hrPosition Description: Protingent Staffing has an exciting contract Electrical Design Engineer opportunity with our client in Renton, WA.Job Responsibilities:Develop an...


  • Renton, United States Protingent Full time

    Job Title: Electrical Design Engineer IIILocations: Renton, WA; Denver, CO; Phoenix, AZEmployment Type: ContractPay Rate: Renton, WA - $80-$95/hrDenver, CO - $75-$90/hrPhoenix, AZ - $67-$80/hrPosition Description: Protingent Staffing has an exciting contract Electrical Design Engineer opportunity with our client in Renton, WA.Job Responsibilities:Develop an...


  • Renton, United States Protingent Full time

    Job Title: Electrical Design Engineer IIILocations: Renton, WA; Denver, CO; Phoenix, AZEmployment Type: ContractPay Rate: Renton, WA - $80-$95/hrDenver, CO - $75-$90/hrPhoenix, AZ - $67-$80/hrPosition Description: Protingent Staffing has an exciting contract Electrical Design Engineer opportunity with our client in Renton, WA.Job Responsibilities:Develop an...


  • Renton, United States Protingent Full time

    Job Title: Electrical Design Engineer IIILocations: Renton, WA; Denver, CO; Phoenix, AZEmployment Type: ContractPay Rate: Renton, WA - $80-$95/hrDenver, CO - $75-$90/hrPhoenix, AZ - $67-$80/hrPosition Description: Protingent Staffing has an exciting contract Electrical Design Engineer opportunity with our client in Renton, WA.Job Responsibilities:Develop an...


  • Renton, United States Protingent Full time

    Job Title: Electrical Design Engineer III Locations: Renton, WA; Denver, CO; Phoenix, AZ Employment Type: Contract Pay Rate: Renton, WA - $80-$95/hr Denver, CO - $75-$90/hr Phoenix, AZ - $67-$80/hr Position Description: Protingent Staffing has an exciting contract Electrical Design Engineer opportunity with our client in Renton, WA. Job Responsibilities: ...


  • Renton, United States Protingent Full time

    Job Title: Electrical Design Engineer IIILocations: Renton, WA; Denver, CO; Phoenix, AZEmployment Type: ContractPay Rate: Renton, WA - $80-$95/hrDenver, CO - $75-$90/hrPhoenix, AZ - $67-$80/hrPosition Description: Protingent Staffing has an exciting contract Electrical Design Engineer opportunity with our client in Renton, WA.Job Responsibilities:Develop an...


  • Renton, United States The Ash Group, Inc. Full time

    Aerospace Systems Engineer III Renton, WA Required Qualifications: B.S. degree or higher in an applicable field (electrical engineering, computer engineering, computer science, etc.) Successful candidates in this role typically have 5+ years of related experience. Proven ability to interpret and apply high-level system requirements to practical design...


  • Renton, United States The Ash Group Full time

    Aerospace Systems Engineer IIIRenton, WARequired Qualifications:B.S. degree or higher in an applicable field (electrical engineering, computer engineering, computer science, etc.)Successful candidates in this role typically have 5+ years of related experience.Proven ability to interpret and apply high-level system requirements to practical design...


  • Renton, United States The Ash Group Full time

    Aerospace Systems Engineer IIIRenton, WARequired Qualifications:B.S. degree or higher in an applicable field (electrical engineering, computer engineering, computer science, etc.)Successful candidates in this role typically have 5+ years of related experience.Proven ability to interpret and apply high-level system requirements to practical design...


  • Renton, United States The Ash Group Full time

    Aerospace Systems Engineer IIIRenton, WARequired Qualifications:B.S. degree or higher in an applicable field (electrical engineering, computer engineering, computer science, etc.)Successful candidates in this role typically have 5+ years of related experience.Proven ability to interpret and apply high-level system requirements to practical design...


  • Renton, United States The Ash Group Full time

    Aerospace Systems Engineer IIIRenton, WARequired Qualifications:B.S. degree or higher in an applicable field (electrical engineering, computer engineering, computer science, etc.)Successful candidates in this role typically have 5+ years of related experience.Proven ability to interpret and apply high-level system requirements to practical design...


  • Renton, United States Volant Partners Full time

    Job DescriptionJob DescriptionAbout Volant PartnersVolant Partners provides business and engineering consulting services to companies across the United States. We thrive by solving complex problems with a focus on regulated industries. We best serve our customers by attracting and retaining the very best consultants. Consequently, we have structured...