Aircraft & Sheet Metal Mechanic

3 weeks ago

Bloomfield, United States Kaman Corporation Full time

Overview

Kaman Air Vehicles is searching for an experienced Aircraft and Sheet Metal Mechanic to join our team in Bloomfield, CT. The individual in this role will work under the direction of the Senior Production Manager with minimum supervision.

Essential Duties and Responsibilities

* Use a wide variety of skill and experience to disassemble, clean, inspect a variety of complex assemblies such as Main Gearboxes, Tail Rotor Gearbox's etc.
* Ability to use work instructions or shop manuals to inspect components for wear over and above limits and document them on applicable documents.
* Assemble complex assemblies as well as install them to an aircraft using manufacturing paperwork, specifications or drawings.
* Ability to use jigs, fixtures and presses to install bearings, bushings tubes, control rods and cables.
* Layout and produce moderate to complex sheet metal assemblies through the use of design drawings and work instructions.
* Use sheet metal tools such as riveting equipment, drills, punches, brakes, shears, and shrinkers is required.
* Install sheet metal assemblies on to aircraft to drawing requirements.
* Read and utilize blueprints, maintenance manuals, illustrated parts catalogs, service bulletins and other maintenance documents to troubleshoot and complete work assignments.
* Efficient use of power tools.
* Must be qualified to interpret assembly drawings involving various sectional views to determine location of part and interrelation to other parts.
* Use of precision measuring instruments to transfer and layout locating dimensions.
* Ability to diagnose, measure and report defective material, supplies or any other unusual condition or circumstance to supervision.
* Follow all safety regulations.
* Read and utilize blueprints, maintenance manuals, illustrated parts catalogs, service bulletins and other maintenance documents to troubleshoot and complete work assignments.
* Perform testing on components, gearboxes, and assemblies as required.
* Undertake statutory training as may be required.
* Must wear protective safety equipment.
* Perform daily scheduled and non-scheduled inspections, maintenance, repair, and alterations of aircraft.

Qualifications

* High school diploma or GED required.
* Minimum of 3 - 5 years of relevant experience required.

  • Aircraft & Sheet Metal Mechanic

    3 weeks ago

    Bloomfield, United States Kaman Corporation Full time

    Use a wide variety of skill and experience to disassemble, clean, inspect a variety of complex assemblies such as Main Gearboxes, Tail Rotor Gearbox's etc. Ability to use work instructions or shop manuals to inspect components for wear over and above Sheet Metal, Aircraft, Mechanic, Metal, Manufacturing, Maintenance

  • Aircraft Assembler A

    4 weeks ago

    Bloomfield, United States Kaman Full time

    Overview: Kaman is searching for an experienced and motivated Aircraft Assembler A to join our Kaman Air Vehicles team in Bloomfield, Connecticut. The individual in this role will work under the direction of the Group Leader, or designee as assigned, with mínimal supervision. Essential Duties and Responsibilities: - Use of a wide variety of special...

  • Aircraft Assembler A

    2 weeks ago

    Bloomfield, United States Kaman Full time

    Overview Kaman is searching for an experienced and motivated Aircraft Assembler A to join our Kaman Air Vehicles team in Bloomfield, Connecticut.  The individual in this role will work under the direction of the Group Leader, or designee as assigned, with minimal supervision.  Essential Duties and Responsibilities Use of a wide variety of special...

  • maintenance Supervisor

    7 days ago

    West Bloomfield, United States AMP Residential Full time

    Job Details Job Location: Silverbrooke Villa DBA 83 West - West Bloomfield, MI Position Type: Full Time Education Level: High School Salary Range: $33.00 - $34.00 Hourly Job Category: Facilities Description Apartment Management Professionals, LLC (AMP Residential) is seeking to hire a Maintenance Supervisor to join our team at 83 West Townhomes! This...

  • Metal Additive Manufacturing Designer/Modeler

    1 day ago

    Bloomfield, United States LiquidPiston Full time

    Job DescriptionJob DescriptionLiquidPiston, Inc. is seeking a Mechanical Engineering Specialist with expertise in Additive Manufacturing and Topology Optimization to enhance the development and manufacturing of our innovative rotary IC engines.Requirements:BS or higher in Mechanical Engineering or related field.Deep expertise in...

  • Millwright Mechanic Urgently Hiring

    1 day ago

    West Bloomfield Township, Michigan, United States Aerotek Full time

    • Able to read mechanical assembly drawings for specific projects to Assembly Conveyors, Air Cylinders, Ball Nut Assembly and Crossfeed Assembly.• As a Pipefitter you will lay out, assemble and install pipe systems and pip support for cooling water and industrial production gases.• Lay out parts for assembly and drill, tap, ream, or cut them as...

  • Machinist IV

    1 month ago

    Bloomfield, United States Kaman Full time

    OverviewKamatics, a divison of Kaman that speicalizes in self-lubricating bearings and engineered products, is looking for talented CNC Machinists! We have a great opportunity for a dynamic and motivated CNC Machinist to join our team in Bloomfield, CT on 1st shift in our Track Roller Value Stream. The core hours for the position are 7:00 AM - 3:30 PM and we...

  • Machinist IV

    1 month ago

    Bloomfield, United States Kaman Full time

    OverviewKamatics, a divison of Kaman, that speicalizes in self-lubricating bearings and engineered products. We have a great opportunity for a dynamic and motivated Skilled CNC Machinist to join our team in Bloomfield, CT on first shift. The core hours for the position are 7:00am to 3:30pm and we are currently running one hour of mandatory overtime, offered...

  • Machinist IV

    1 month ago

    Bloomfield, United States Kaman Full time

    OverviewKamatics, a divison of Kaman that speicalizes in self-lubricating bearings and engineered products, is looking for talented CNC Machinists! We have a great opportunity for a dynamic and motivated CNC Machinist IV for our Specials Value Stream to join our team in Bloomfield, CT on 2nd shift. The core hours for the position are 3:30 PM - 12:00 AM, and...

  • Skilled CNC Machinist IV

    2 weeks ago

    Bloomfield, United States Kamatics Corp. Defunct Full time

    OverviewKamatics, a divison of Kaman, that speicalizes in self-lubricating bearings and engineered products. We have a great opportunity for a dynamic and motivated Skilled CNC Machinist to join our team in Bloomfield, CT on first shift. The core hours for the position are 7:00am to 3:30pm and we are currently running one hour of mandatory overtime, offered...

  • Machinist V

    6 hours ago

    Bloomfield, United States Kamatics Corp. Defunct Full time

    OverviewKamatics, a divison of Kaman that speicalizes in self-lubricating bearings and engineered products, is looking for talented CNC Machinists! We have a great opportunity for a dynamic and motivated CNC Machinist IV for our Specials Value Stream to join our team in Bloomfield, CT on 2nd shift. The core hours for the position are 3:30 PM - 12:00 AM, and...

  • Part-time Skilled CNC Machinist

    6 days ago

    Bloomfield, United States Kamatics Corporation Full time

    OverviewKamatics, a divison of Kaman that speicalizes in self-lubricating bearings and engineered products, has an opening for a dynamic and motivated Part-time Skilled CNC Machinist to join our team in Bloomfield, CT. This position is for part-time on 2nd shift and the incumbent employee will choose their hours. For this position, we offer a flexible...

  • Machinist IV

    3 weeks ago

    Bloomfield, United States BuildSubmarines.com Full time

    Overview Kamatics, a divison of Kaman that speicalizes in self-lubricating bearings and engineered products, is looking for talented CNC Machinists! We have a great opportunity for a dynamic and motivated CNC Machinist to join our team in Bloomfield, CT on 1st shift in our Track Roller Value Stream. The core hours for the position are 7:00 AM - 3:30 PM and...

  • Part-time Skilled CNC Machinist

    5 hours ago

    Bloomfield, United States Kamatics Corp. Defunct Full time

    OverviewKamatics, a divison of Kaman that speicalizes in self-lubricating bearings and engineered products, has an opening for a dynamic and motivated Part-time Skilled CNC Machinist to join our team in Bloomfield, CT. This position is for part-time on 2nd shift and the incumbent employee will choose their hours. For this position, we offer a flexible...

  • Highly Skilled Machinist

    1 week ago

    Bloomfield, United States Kamatics Corporation Full time

    OverviewKamatics a divison of Kaman that speicalizes in self-lubricating bearings and engineered products. We have a great opportunity for a dynamic and motivated CNC Machinist to join our team in Bloomfield, CT on night shift with a 15% shift differential. The core hours for the position are 3:30pm to 12:00am and we are currently running one hour of...

  • Machinist IV

    1 month ago

    Bloomfield, United States Kaman Full time

    OverviewKamatics, a divison of Kaman that speicalizes in self-lubricating bearings and engineered products, is looking for talented CNC Machinists! We have a great opportunity for a dynamic and motivated CNC Machinist to join our team in Bloomfield, CT on 1st shift supporting our Kaflex Value Stream. The core hours for the position are 7:00 AM - 3:30 PM and...

  • Machinist IV

    1 month ago

    Bloomfield, United States Kamatics Corporation Full time

    OverviewKamatics, a divison of Kaman that speicalizes in self-lubricating bearings and engineered products, is looking for talented CNC Machinists! We have a great opportunity for a dynamic and motivated CNC Machinist to join our team in Bloomfield, CT on 1st shift supporting a variety of our Value Streams. The core hours for the position are 7:00 AM - 3:30...

  • Machinist IV

    2 weeks ago

    Bloomfield, United States BuildSubmarines.com Full time

    Overview Kamatics, a divison of Kaman that speicalizes in self-lubricating bearings and engineered products, is looking for talented CNC Machinists! We have a great opportunity for a dynamic and motivated CNC Machinist to join our team in Bloomfield, CT on 1st shift supporting a variety of our Value Streams. The core hours for the position are 7:00 AM -...

  • Machinist IV

    2 weeks ago

    Bloomfield, United States Kamatics Corp. Defunct Full time

    OverviewKamatics, a divison of Kaman that speicalizes in self-lubricating bearings and engineered products, is looking for talented CNC Machinists! We have a great opportunity for a dynamic and motivated CNC Machinist to join our team in Bloomfield, CT on 1st shift supporting a variety of our Value Streams. The core hours for the position are 7:00 AM - 3:30...

  • Machinist Trainee 1st Shift

    1 month ago

    Bloomfield, United States Kamatics Corp. Defunct Full time

    OverviewWe have an exciting opportunity for a dynamic and motivated Machinist Trainee to join our team in Bloomfield, CT. Reporting to the Value Stream Manager the Machinist Trainee will learn about machining operations as part of the production process in a variety of different cells. The core hours are 7:00am to 3:30pm, Monday through Friday and currently...