Mechanic III

4 weeks ago

Tucson, United States Flanders Full time

The FLANDERS team is looking for Mechanic to join the Tucson, AZ team This over-all Mechanic will disassemble, inspect, clean, repair, test, reassemble basic and routine AC and DC electromechanical motors and equipment. Learn to work in multiple areas but not limited to: Balancing, Machining, Welding and Winding.

* Disassembly: Disassemble complex electromechanical equipment noting parts identification, configuration, condition, problems, and failures.
* Properly mark parts, take photos, and thoroughly complete documentation on iPad, to ensure accurate job completion that meets company and ISO standards.
* Assembly: Assist Mechanics with the final assembly of motors per instructions for each specific job. Assemble basic to complex motors and equipment including ball, roller, and sleeve bearings.
* Testing: Perform basic test of electromechanical equipment and document accordingly. Troubleshoot known or suspected problems.
* Clean & Inspect: Clean electromechanical equipment assemblies as needed using various methods and steps including but not limited to parts washers/steamers, caustic tanks, and glass beaders.
* Repairs: Repair or replace defective mechanical or electromechanical parts including but not limited to bearings, brushes, brush holders, motor leads, gears, seals, couplers, overspeeds, brake assemblies and drums, tachs, fans, and end shields.
* Documentation: Maintain thorough documentation on iPad throughout entire repair process, including all test sheets from receiving unit description to Quality Control Checklist. Record accurately and on a timely basis.
* Assist other mechanics or other employees in skilled or non-skilled duties as requested.
* Perform other duties as requested

Here's What You'll Need:

Education: High school diploma or equivalent.

Experience: Minimum of five years hands-on experience with mechanical or electrical equipment.

Other:

* Ability to perform basic math functions including addition, subtraction, multiplication, division including understanding fractions and percentages.
* Ability to read, write, and comprehend simple written and verbal instructions.
* Ability to use iPad and computer.
* Ability to understand, perform, and retain various job related training, operational, and safety procedures.
* Ability to exercise initiative, judgment, and decision making related to routine duties within set company standards
* Ability to operate overhead cranes, fork lift trucks, and other equipment following proper procedures.
* Ability to operate various hand tools.
* Ability to receive respirator clearance.
* Ability to read tape measures, dial calipers, and micrometers.

  • Assembler Iii

    7 days ago

    Tucson, United States Edmund Optics Full time

    Overview: An Assembler III must utilize work instructions, blue prints, and spec sheets to assemble and package opto-mechanical products for stock and shipment under the direction of the Assembly Manager or Group Leader. **Responsibilities**: - Assemble mechanical components, opto-mechanical components, opto-electro-mechanical assemblies using equipment,...

  • Assembler Iii

    1 week ago

    Tucson, United States Edmund Optics Full time

    **Overview**: - An Assembler III must utilize work instructions, blue prints, and spec sheets to assemble and package opto-mechanical products for stock and shipment under the direction of the Assembly Manager or Group Leader.**Responsibilities**: - Assemble mechanical components, opto-mechanical components, opto-electro-mechanical assemblies using...

  • Assembler Iii

    1 week ago

    Tucson, United States Edmund Optics, Inc. Full time

    An Assembler III must utilize work instructions, blue prints, and spec sheets to assemble and package opto-mechanical products for stock and shipment under the direction of the Assembly Manager or Group Leader. **Responsibilities**: - Assemble mechanical components, opto-mechanical components, opto-electro-mechanical assemblies using equipment, hand tools,...

  • Machine Operator Iii

    2 days ago

    Tucson, United States Keurig Dr Pepper Full time

    Job Overview: **Machine Operator III**: - Tucson, AZ** The Machine Operator III is responsible for operating assigned stations and all other associated work including preventative maintenance, machine changeovers, making minor adjustments to maintain greatest operational efficiency, assist other mechanics, etc. **Position Responsibilities** - Handle empty...

  • Aircraft Mechanic III

    3 weeks ago

    Tucson, Arizona, United States PowerHouse Resources International Full time

    Performs mechanical stripping of paint materials, corrosion repair and mitigation, modifications to and structural repair on aircraft panels, surfaces, and structural componentsInspect and evaluate structural damage to aircraft sheet metal systems; and prepares composite surfaces using state of the art materials, methods, procedures and inspections.Properly...

  • Fleet Mechanic

    3 days ago

    Tucson, United States Keurig Dr Pepper Full time

    Fleet Mechanic III- Tucson, AZ About the Role Perform scheduled preventative maintenance and necessary repairs to automobiles, trucks (light and heavy), trailers, vans and forklifts. Disassembles and overhauls motors, transmissions, clutches, rear ends and electrical systems. Complete all necessary documents, including vehicle records. Manage ordering...

  • Fleet Mechanic

    2 days ago

    Tucson, United States Keurig Dr Pepper Full time

    Fleet Mechanic III- Tucson, AZ About the Role Perform scheduled preventative maintenance and necessary repairs to automobiles, trucks (light and heavy), trailers, vans and forklifts. Disassembles and overhauls motors, transmissions, clutches, rear ends and electrical systems. Complete all necessary documents, including vehicle records. Manage ordering...

  • Assembler II

    1 month ago

    Tucson, United States Boeckeler Instruments Inc Full time

    Job DescriptionJob DescriptionAn Assembler Level II / III, at the direction of the Production Supervisor, is responsible for bench assembly operation to produce (sub)assemblies for our Sample Preparation Product Line. Assemble mechanical parts, pieces, and/or products using a variety of tools and/or equipment according to required specifications, processes,...

  • Assembler II

    2 days ago

    Tucson, United States Boeckeler Instruments Inc Full time

    Job DescriptionJob DescriptionAn Assembler Level II / III, at the direction of the Production Supervisor, is responsible for bench assembly operation to produce (sub)assemblies for our Sample Preparation Product Line. Assemble mechanical parts, pieces, and/or products using a variety of tools and/or equipment according to required specifications, processes,...

  • Biomed Equipment Tech III

    1 month ago

    Tucson, United States Tucson Medical Center Full time

    Biomed Equipment Tech III - TMC RIncon Job CategoryInformation Technology ScheduleFull time Shift1 - Day Shift SUMMARY: Performs advanced level work in the installation, calibration, inspection, preventive maintenance, and repair of technically sophisticated biomedical and related technical equipment. Takes responsibility for initiating appropriate...

  • Biomed Equipment Tech III

    1 day ago

    Tucson, United States Tucson Medical Center Full time

    Biomed Equipment Tech III - TMC RIncon Job CategoryInformation Technology ScheduleFull time Shift1 - Day Shift SUMMARY: Performs advanced level work in the installation, calibration, inspection, preventive maintenance, and repair of technically sophisticated biomedical and related technical equipment. Takes responsibility for initiating appropriate...

  • Inspector III

    2 weeks ago

    Tucson, United States Sargent Aerospace & Defense Full time

    Job DescriptionJob DescriptionJoin the Sargent Legacy in Securing Our Future With continual growth comes opportunity and Sargent has an immediate opening for an Inspector III. *Sign-On Bonus* Position SummaryInspects and reports on materials, processes and products using variable or attribute measuring instruments and techniques to assure conformance with...

  • Inspector III

    13 hours ago

    Tucson, United States Sargent Aerospace & Defense Full time

    Job DescriptionJob DescriptionJoin the Sargent Legacy in Securing Our Future With continual growth comes opportunity and Sargent has an immediate opening for an Inspector III. *Sign-On Bonus* Position SummaryInspects and reports on materials, processes and products using variable or attribute measuring instruments and techniques to assure conformance with...

  • Research Technician III

    1 month ago

    Tucson, United States University of Arizona Full time

    Perform lab experiments with minimal supervision including gel electrophoresis for protein analyses, mouse dissections, and other specific muscle mechanical experiments. Ensure compliance with lab procedures, protocols, and quality control. Collect and analyze data, and document the results of experiments. Record information and maintain detailed records of...

  • CNC and Machinery Maintenance Tech III

    2 weeks ago

    Tucson, United States Sargent Aerospace & Defense Full time

    Job DescriptionJob DescriptionJoin the Sargent Legacy in Securing Our Future With continual growth comes opportunity and Sargent has an immediate opening for a CNC Maintenance Technician III. Purpose and ScopeThis position provides basic support and preventative maintenance on production equipment.  This role will be expected to collaborate with the...

  • CNC and Machinery Maintenance Tech III

    2 days ago

    Tucson, United States Sargent Aerospace & Defense Full time

    Job DescriptionJob DescriptionJoin the Sargent Legacy in Securing Our Future With continual growth comes opportunity and Sargent has an immediate opening for a CNC Maintenance Technician III. Purpose and ScopeThis position provides basic support and preventative maintenance on production equipment.  This role will be expected to collaborate with the...

  • Field Service Technician

    1 month ago

    Tucson, United States FLANDERS ELECTRIC MOTOR SERVICE INC Full time

    This position is responsible for providing customer on-site diagnosis, maintenance, repair, installation, and/or removal of basic to moderately complex electromechanical motors and equipment. Position with also partner with Technician III’s and Foremen on complex jobs, May work independently on small to medium accounts and/or moderately complex...

  • Adaptive Optics Instrument Engineer

    4 weeks ago

    Tucson, United States University of Arizona Full time

    Optical Design: Will develop optical designs using ZEMAX and other optical software that meet the scientific specifications for astronomical observations. The candidate must have extensive knowledge of optical design and how direct input into a design will be used to build and implement an Adaptive Optics Instruments. This work will lead to reports,...

  • Adaptive Optics Instrument Engineer

    4 weeks ago

    Tucson, United States University of Arizona Full time

    The Center for Astronomical Adaptive Optics (CAAO) at Steward Observatory is developing and operating several world class adaptive optics (AO) systems at large telescopes, specifically the Large Binocular Telescope Interferometer (LBTI), the adaptive Engineer, Optical, Instrument, Mechanical Engineer, R&D, Research Engineer, Manufacturing

  • Biomed Equipment Tech Iii

    1 day ago

    Tucson, United States Tucson Medical Center Full time

    **SUMMARY**: **Performs advanced level work in the installation, calibration, inspection, preventive maintenance, and repair of technically sophisticated biomedical and related technical equipment. Takes responsibility for initiating appropriate actions in response to clinical requests or program driven request for the areas assigned to this position. May...