See more Collapse

Metrology Engineer II

1 month ago

Savannah, United States General Dynamics Full time

Responsibilities for this Position

Position Title: Metrology Engineer II (Second Shift)

Date: Apr 24, 2024

Location: Savannah, GA, US

Company: Gulfstream Aerospace Corporation

Metrology Engineer II (Second Shift) in GAC Savannah

Unique Skills:

1. Metrology Laser Tracking/Measurement Software experience preferred.

2. Strong configuration management skills working with 2D drawings along with 3D models preferred.

3. Experience with Gulfstream G550 aircraft preferred.

Note: OJT Metrology training will take place on first shift for six months to a year before transitioning over to second shift.

Physical requirements to support critical job functions:

1. Sitting, standing, walking, carrying, reaching, pushing, and pulling.

2. Work from ladders and/or scaffolding safely for an extended period of time.

3. Ability to lift 50lbs

Education and Experience Requirements

Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 18 months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.

Position Purpose:

Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Job Description

Principle Duties and Responsibilities:

Essential Functions:

* Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. .
* Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of Gulfstream aircraft. .
* Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures.
* Assist in developing and documenting standards for the handling and utilization of metrology equipment. .
* Create standardized inspection reports through the utilization of Metrologic software.
* Study and optimize equipment performance for increased capacity and equipment efficiency.
* Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades.
* Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability.
* Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment.
* Coordinate the implementation of projects between multiple organizations.
* Support all Safety, Sustainability and Ergonomic Initiatives.

Additional Functions:

* Work to improve daily processes, and ensures all work meets customer requirements. .
* Assist tool shop as needed, during periodic and conformity Inspections. .
* Provide input toward the selection of metrology equipment and software. .

Perform other duties as assigned.

Other Requirements:

* Extensive knowledge of metrology equipment, software and current measurement techniques.
* Knowledge 3D CAD/CATIA modeling and an understanding of GD&T.
* Knowledge of Lean and/or Six Sigma principles.

Additional Information

Requisition Number: 219360

Category: Operations Engineering

Percentage of Travel: Up to 25%

Shift: Second

Employment Type: Full-time

Posting End Date: 05/16/2024

Equal Opportunity Employer/Veterans/Disabled.

Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.

Legal Information | Site Utilities | Contacts | Sitemap

Copyright 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.

Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

#LI-SJT

Nearest Major Market: Savannah

Job Segment: Lean Six Sigma, Six Sigma, Aerospace Engineering, Manufacturing Engineer, Management, Engineering, Aviation

We have other current jobs related to this field that you can find below

  • Manufacturing Engineer II, Savannah, GA,

    2 months ago

    Savannah, United States Aviation Technology Associates LLC Full time

    Aviation Technology Associates (AVTECH) is looking for a Manufacturing Engineer II in Savannah, GAPosition Purpose: Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production...

  • Engine Systems Group

    1 month ago

    Savannah, United States Gulfstream Aerospace Corporation Full time

    **Engine Systems Group - TS II in GAC Savannah** **Unique Skills**: Engine Installation FAR 25 requirements familiarization Technical report writing skill demonstrated Supplier (engine manufacturer) management **Education and Experience Requirements**: - Bachelor's Degree in engineering or technical related curriculum applicable to the respective job...

  • Flight Test Engineer Technical Specialist II

    3 days ago

    Savannah, United States Gulfstream Full time

    Press Tab to Move to Skip to Content Link Select how often (in days) to receive an alert: Flight Test Engineer Technical Specialist II Company: Gulfstream Aerospace Corporation Flight Test Engineer Technical Specialist II in GAC Savannah This position requires a self-motivated engineer to fulfill responsibilities including analysis of flight test data,...

  • Quality Assurance Engineer II

    4 weeks ago

    Savannah, United States Gulfstream Aerospace Full time

    Quality Assurance Engineer II in GAC Savannah Unique Skills: Strong communication skills are essential for collaborating with other departments Experience in Microsoft Office, Microsoft Teams, Power BI, Corridor and SAP is a plus Education and Experience Requirements Bachelor's Degree in Engineering, aviation sciences, quality systems or...

  • Manufacturing Engineer II

    2 months ago

    Savannah, United States Precision Personnel Full time

    Manufacturing Engineer II - Second ShiftPosition Purpose:Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication,...

  • Stress MRB Engineer

    4 weeks ago

    Savannah, United States Gulfstream Aerospace Full time

    Stress MRB Engineer - TS II in GAC Savannah Unique Skills: Candidate must have a minimum 10 years of stress analysis on aircraft primary structure. Candidate must have experience in fatigue anlaysis on aircraft structure and have a working knowledge of FEM. Candidate must have a working knowledge of CATIA V5. Candidate must have experience...

  • Engine Systems Group

    4 weeks ago

    Savannah, United States Gulfstream Aerospace Corporation Full time

    Engine Systems Group - TS II in  GAC SavannahUnique Skills:Engine Installation FAR 25 requirements familiarizationTechnical report writing skill demonstratedSupplier (engine manufacturer) management Education and Experience RequirementsBachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10...

  • Flight Controls Engineer II

    4 weeks ago

    Savannah, United States Gulfstream Full time

    Flight Controls Engineer II in GAC Savannah Unique Skills: What we do: The Flight Controls team is responsible for the design, development, integration, and certification of the Gulfstream Flight Control Systems across all large cabin programs. These systems are complex in nature and are designed by a highly cross-functional team of exceptional engineers in...

  • Thrust Reverser Engineer

    2 weeks ago

    Savannah, United States Gulfstream Full time

    Thrust Reverser Engineer - TS II in GAC Savannah Unique Skills: Ideal candidate should have 10+ years of direct thrust reverser integration experience in a part 25 environment. Previous or current powerplant DER authority a plus. Education and Experience Requirements Bachelor's Degree in engineering or technical related curriculum applicable to the...

  • Stress MRB Engineer

    2 weeks ago

    Savannah, United States Gulfstream Full time

    Stress MRB Engineer - TS II in GAC Savannah Unique Skills: Candidate must have a minimum 10 years of stress analysis on aircraft primary structure. Candidate must have experience in fatigue anlaysis on aircraft structure and have a working knowledge of FEM. Candidate must have a working knowledge of CATIA V5. Candidate must have experience developing and...

  • Manufacturing Systems Engineer II

    4 weeks ago

    Savannah, United States Gulfstream Aerospace Corporation Full time

    Manufacturing Systems Engineer II in  GAC SavannahUnique Skills:Experience in any of the following preferred:SAP or other ERP systemSolumina or other MES systemDocumentationTrainingPower BISharePoint  Education and Experience RequirementsBachelor's Degree in Manufacturing Engineering/Technology, Quality Management or a related curriculum required or ...

  • EWIS EHI Engineer

    2 weeks ago

    Savannah, United States Gulfstream Aerospace Corporation Full time

    EWIS EHI Engineer - TS II in  GAC SavannahUnique Skills:-Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.-Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.-Capable of interfacing with wiring diagrams, systems, and EMI/EMC...

  • EWIS EHI Engineer

    1 month ago

    Savannah, United States Gulfstream Full time

    EWIS EHI Engineer - TS II in GAC Savannah Unique Skills: Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements....

  • NDT Engineer Specialist II

    3 days ago

    Savannah, United States Gulfstream Aerospace Full time

    NDT Engineer Specialist II in GAC SavannahUnique SkillsFly With UsOur aircraft are industry leaders and so are our people. We're looking for talented, motivated individuals who are ready to do innovative work, and we offer exciting career opportunities worldwide.About Our Group And RoleThe NDT (Non-Destructive Testing) team is part of our Enterprise Quality...

  • NDT Engineer Specialist II

    5 days ago

    Savannah, United States Gulfstream Aerospace Full time

    NDT Engineer Specialist II in GAC SavannahUnique SkillsFly With UsOur aircraft are industry leaders and so are our people. We're looking for talented, motivated individuals who are ready to do innovative work, and we offer exciting career opportunities worldwide.About Our Group And RoleThe NDT (Non-Destructive Testing) team is part of our Enterprise Quality...

  • Lead Certification Engineer II

    1 month ago

    Savannah, United States Gulfstream Full time

    Lead Certification Engineer II - Completions in GAC Savannah Unique Skills: Detailed working experience of the conformity and compliance processes as they relate to EWIS and structures, and compliance testing. Scheduling Strong communicator Ability to manage people and multiple complex projects Can generate powerpoints and other metrics as required Education...

  • Flight Controls Engineer

    2 months ago

    Savannah, United States Gulfstream Full time

    Flight Controls Engineer - TS II in GAC Savannah Unique Skills: What we do: The Flight Controls team is responsible for the design, development, integration, and certification of the Gulfstream Flight Control Systems across all large cabin programs. These systems are complex in nature and are designed by a highly cross-functional team of exceptional...

  • Human Factors Engineer

    24 hours ago

    Savannah, United States Gulfstream Full time

    Press Tab to Move to Skip to Content Link Select how often (in days) to receive an alert: Company: Gulfstream Aerospace Corporation Human Factors Engineer - TS II in GAC Savannah On any given day, you may: Design and lead part task simulation evaluations for detailed design requirement definition using software and physical mockups, or predictive modeling...

  • Clinical Research Coordinator II

    1 month ago

    Savannah, United States Actalent Full time

    CLINICAL RESEARCH COORDINATOR II Description: + The Clinical Research Coordinator II is responsible for the coordination of all day-to-day clinical research activities with minimal supervision. + The CRC-II is assigned more complex studies, including but not limited to Phase II and Phase III therapeutic clinical trials for various types or stages of cancer....

  • Clinical Research Coordinator II

    4 weeks ago

    Savannah, United States Actalent Full time

    CLINICAL RESEARCH COORDINATOR II Description: The Clinical Research Coordinator II is responsible for the coordination of all day-to-day clinical research activities with minimal supervision. The CRC-II is assigned more complex studies, including but not limited to Phase II and Phase III therapeutic clinical trials for various types or stages of cancer....