Outside Machinist
4 weeks ago
Job Description:
- This position is responsible for removing, installing, and testing main and auxiliary shipboard equipment including but not limited to: Main Reduction Gears (MRG), pumps, valves, hydraulic equipment, steam equipment, valves, propellers, bearings, etc. on maritime vessels including US Navy, Military Sealift Command, and commercial.
- The work occurs in various stages of repair and modernization and requiring the ability to operate a wide variety of tools and machinery, and the ability to read and comprehend specifications and drawings.
- The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard.
- Must be able to comprehend instructions, drawings, and general correspondence.
- Must have comprehensive understanding of ship repair terminology and ship compartment location nomenclature.
- Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.)
- Must be able to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action.
- Must be able to work from Process Control Procedures (PCP).
- Must be able to use precision measurement tools.
- Must be able to effectively confer job related information to the structural supervisor and small groups, and provide technical guidance to Helpers and Improvers.
- Must be able to interpret drawings, sketches, tech manuals, and user manuals to the extent necessary to remove, repair, and install equipment.
- Must understand the NAVSEA standard items, especially 009-04 for tests, inspections, and check points; 009-23 for interferences; and 009-24 for blanking and match marks.
- Must have a comprehensive understanding of Lock-out / Tag-out procedures.
- Must understand laser alignment.
- Must understand reverse indicator alignment procedures.
- Must understand the proper and safe use and operation of the hand and power tools required to accomplish the work.
- Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system and the metric system.
- Six (6) years of machinist experience, two (2) of which in the maritime environment.
- Comply with OSHA standards and BAE best safety practices.
- Arrive at the designated work site at the assigned time and end the shift as directed by the supervisor. 3. Work shifts and overtime as assigned.
- Keep the work area clean and safe at all times, especially at the end of the shift.
- Complete work assignments as scheduled and provide status of unfinished work for shift turnover.
- Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor.
- Comply with the Company’s “Non-Discrimination and Anti-Harassment Policy” which requires that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment.
- Carry out instructions furnished in written, oral, or diagram form. Resolve unexpected events related to your assigned task in a professional manner.
- Work Tasks Include:
- Prepare a safe work area especially as it relates to fire prevention.
- Coordinate work with other crafts to disconnect and remove equipment.
- Compile as-found reports identifying the status of equipment prior to work.
- Perform in-place valve repairs.
- Write material take offs with adequate information for ordering.
- Align equipment.
- Participate in and report results of operational tests.
- Write informative and coherent condition reports in accordance with NAVSEA Standard Item 009-01or other regulatory body standard specifications.
- Direct and monitor the activities of assigned helpers or improvers.
- Run and remove lines and leads as required to accomplish work and in accordance with OSHA and BAE safety standards.
- Implement Lock-out Tag-out for work being performed.
- The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual.
- When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present.
- There are heavy equipment and power tools operating almost at every location.
- Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements.
- Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders.
- Work may also be accomplished using mechanical lifts as working platforms.
- The noise level in the shipyard environment is usually loud, especially inside of vessels.
- The noise encountered in the shop is generally low to moderate.
- The wearing of appropriate personal protective equipment is mandatory.
- There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn.
- The physical demands described here are representative of those that personnel may encounter every day in the course of performing work on ships, piers, docks.
- While performing the duties of this position the employee is regularly required to: stand; walk; use hands and fingers to handle directly or work from touch; reach out with arms; climb; stoop; kneel; crouch; crawl; and communicate in a loud environment. The employee is occasionally required to sit.
- Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day).
- Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day).
- Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel.
- Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps).
- Work at a variety of levels and positions (ex. Waist, eye, above head).
- Good balance while working on uneven surfaces and maneuvering obstacles.
- Sufficient handgrip and coordination to carry and operate tools and equipment.
- Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day).
- Respond to visual, verbal, and audible sounds/commands.
- Work at heights above 12’ from ladders, scaffolding, and manlifts.
- Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down.
- Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.
- Turn head from side to side and about on the vertical axis.
- Turn body at the waist from side to side and about the vertical axis.
-
Outside Machinist
2 months ago
Norfolk, United States Tidewater Staffing Remote Work Freelance Full time $20 - $30Tidewater Staffing is currently seeking Outside Machinists for work in various local shipyards!Job Description:The Outside Machinist must possess knowledge, skills and abilities to perform job operation/tasks on conventional and nuclear ships and submarines. The Outside Machinist must be assignable to any work center excluding nuclear and subsafe machinery....
-
Outside Machinist
4 weeks ago
Norfolk, United States Shipyard Staffing LLC Part time $17 - $27Shipyard Staffing is currently hiring for Outside Machinist for work in Norfolk and Newport News, VA>About the Job:The Outside Machinist position is responsible for the installation of propulsion machinery, sea valves, steering gear, anchor handling equipment, elevators, pumps, ventilation fans, cooling coils, refrigeration units, compressors, weapons...
-
Outside Machinist
4 weeks ago
Norfolk, United States Shipyard Staffing LLC Full timeShipyard Staffing is currently hiring for Outside Machinist for work in Norfolk and Newport News, VA>About the Job:The Outside Machinist position is responsible for the installation of propulsion machinery, sea valves, steering gear, anchor handling equipment, elevators, pumps, ventilation fans, cooling coils, refrigeration units, compressors, weapons...
-
Outside Machinist
2 weeks ago
Norfolk, United States Walashek Full timeJob DescriptionJob DescriptionThe Outside Machinist position is responsible for the installation of propulsion machinery, sea valves, steering gear, anchor handling equipment, elevators, pumps, ventilation fans, cooling coils, refrigeration units, compressors, weapons systems, remote operators, radars, and antennas. In the process of installing this...
-
Outside Machinist
4 weeks ago
Norfolk, United States Walashek Full timeThe Outside Machinist position is responsible for the installation of propulsion machinery, sea valves, steering gear, anchor handling equipment, elevators, pumps, ventilation fans, cooling coils, refrigeration units, compressors, weapons systems, remote operators, radars, and antennas. In the process of installing this equipment, experience is gained in the...
-
Outside Machinist
2 weeks ago
Norfolk, United States Shipyard Staffing Full timeJob DescriptionJob DescriptionShipyard Staffing is currently hiring for Outside Machinist for work in Newport News, VA.Outside Machinist Job Description:The Outside Machinist position is responsible for removing, installing, and testing main and auxiliary shipboard equipment including but not limited to: Main Reduction Gears (MRG), pumps, valves, hydraulic...
-
Outside Machinist
4 weeks ago
Norfolk, United States Shipyard Staffing Full timeJob DescriptionJob DescriptionShipyard Staffing is currently hiring for Outside Machinist for work in Newport News, VA.Outside Machinist Job Description:The Outside Machinist position is responsible for removing, installing, and testing main and auxiliary shipboard equipment including but not limited to: Main Reduction Gears (MRG), pumps, valves, hydraulic...
-
Outside Machinist
2 weeks ago
Norfolk, Virginia, United States Colonna's Shipyard Full timeOutside Machinist - Helper Purpose:Colonna's Shipyard is seeking an Outside Machinist Helper to support operations in our Shipyard in Norfolk, VAJob Description: Disassembles various types of equipment and machinery common to maritime vessels and/or general industry including but not limited to pumps, valves, winches, gear boxes. Assists in determining...
-
Outside Machinist
3 months ago
Norfolk, United States Marine Hydraulics International, LLC Full timeJob DescriptionJob DescriptionMHI Ship Repair & Services is a major marine repair and conversion contractor serving the U.S. Navy, Military Sealift Command, Maritime Administration and Commercial ship owners and operators worldwide. Our ship yard is conveniently located in the Mid-Atlantic region at the port of Hampton Roads, Norfolk Virginia.JOB SUMMARY:...
-
Outside Machinist
1 week ago
Norfolk, United States Marine Hydraulics International, LLC Full timeJob DescriptionJob DescriptionMHI Ship Repair & Services is a major marine repair and conversion contractor serving the U.S. Navy, Military Sealift Command, Maritime Administration and Commercial ship owners and operators worldwide. Our ship yard is conveniently located in the Mid-Atlantic region at the port of Hampton Roads, Norfolk Virginia.JOB SUMMARY:...
-
Outside Machinist
3 months ago
Norfolk, United States Marine Hydraulics International, LLC Full timeJob DescriptionJob DescriptionMHI Ship Repair & Services is a major marine repair and conversion contractor serving the U.S. Navy, Military Sealift Command, Maritime Administration and Commercial ship owners and operators worldwide. Our ship yard is conveniently located in the Mid-Atlantic region at the port of Hampton Roads, Norfolk Virginia.JOB SUMMARY:...
-
Machinist Mate
4 weeks ago
Norfolk, United States Aerotek Full timeAerotek is hiring shipyard Outside Machinists for a contract-to-hire opportunity in Norfolk, VA. Prior Navy and applicable shipyard experience required for role. Hourly pay is based off specific experience. Ideal Skillsets: Machinist Mate Outside Machinist Diesel Mechanic Marine Mechanic Engineman Hydraulics Mechanic Gas Turbine Tech General Info: Job Title:...
-
Machinist Mate
2 weeks ago
Norfolk, Virginia, United States Aerotek Full timeAerotek is hiring shipyard Outside Machinists for a contract-to-hire opportunity in Norfolk, VA. Prior Navy and applicable shipyard experience required for role. Hourly pay is based off specific experience. Ideal Skillsets: Machinist Mate Outside Machinist Diesel Mechanic Marine Mechanic Engineman Hydraulics Mechanic Gas Turbine Tech General Info: Job Title:...
-
Outside Machinist
2 weeks ago
Norfolk, United States Aerotek Full time**Job Title: Electrical Systems Technician - Shipyard****Job Description**The selected candidate will be responsible for the installation, repair, overhaul, and operational testing of electrical systems aboard the ship, particularly within the Refueling Complex Overhaul program. This role requires the ability to read and interpret various system drawings and...
-
Senior Tool Room Technician
2 weeks ago
Norfolk, United States Cardinal Health Full timeSenior Tool Room Technician – Mold Repair/Machinist 3rd shift Shift: Sunday - Thursday / 11pm-7am Now offering a $5000 New Hire Sign-On Bonus! Manufacturing is responsible for cost of production and maintenance activities including process improvement, supply chain management, quality assurance, employee safety and engagement, and...
-
Senior Tool Room Technician
2 weeks ago
Norfolk, United States Cardinal Health Full timeSenior Tool Room Technician – Mold Repair/Machinist 3rd shift Shift: Sunday - Thursday / 11pm-7am Now offering a $5000 New Hire Sign-On Bonus! Manufacturing is responsible for cost of production and maintenance activities including process improvement, supply chain management, quality assurance, employee safety and engagement, and...
-
2nd Class Inside Machinist
3 weeks ago
Norfolk, United States Colonna's Shipyard, Inc. Full time2nd Class Inside Machinist Purpose: Steel America is seeking 2nd Class Inside Machinists experienced in Manual Machining and/or CNC Mills & Lathes to support operations in the Inside Machine Shop in Norfolk, VA. Job Description: * Examines blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of...
-
1st Class Inside Machinist
4 weeks ago
Norfolk, United States Colonna's Shipyard, Inc. Full time1st Class Inside Machinist Purpose: Steel America is seeking 1st Class Inside Machinists experienced in Manual Machining and/or CNC Mills & Lathes to support operations in the Inside Machine Shop in Norfolk, VA. Job Description: * Examines blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of...
-
Senior Tool Room Technician
1 week ago
Norfolk, United States Cardinal Health Full timeSenior Tool Room Technician – Mold Repair/Machinist 3rd shift Shift: Sunday - Thursday / 11pm-7am Now offering a $5000 New Hire Sign-On Bonus! What Production Operation contributes to Cardinal Health Manufacturing is responsible for cost of production and maintenance activities including process improvement, supply chain management, quality...
-
Industrial Trades Positions
4 weeks ago
Norfolk, United States CTR Corporation Full timeCTR Openings throughout Hampton Roads - Hiring ASAP CTR Group is looking for qualified candidates throughout Hampton Roads. Pay Rate: Up to $30/hour (based on experience) Start Date: Monday, August, 3, 2020 Benefits: Offered after 90 days Locations: Newport News, Hampton, Norfolk, Chesapeake, Portsmouth Our recruiting department is looking for immediate...