![Prolec-GE Waukesha,Inc](https://media.trabajo.org/img/noimg.jpg)
Shipper/Painter - 3rd Shift
2 weeks ago
JOB SUMMARY
The shipper role is an assembly role. It is the last to touch the product before it is sent out of our facility. This role involves dismantling each unit and getting it prepared for shipment.
Welder: Must develop skills through training and demonstrate proficiency in the following areas: transformer disassembly, preparing units for painting, welding components required for shipment, preparing units to load, loading units to rail cars or trucks, and shipping parts.
Painter: Must develop skills through training and demonstrate proficiency in the following areas: transformer disassembly, preparing units for painting, painting, preparing units to load, loading units to rail cars or trucks, and shipping parts.
PRINCIPLE DUTIES AND RESPONSIBILITIES
- Receive assignments and instructions from supervisor - both verbal and written. Follows drawings, Bill of Materials, and other established manufacturing procedures. Coordinate and communicate with supervision and team leads.
- Dismantle transformer for shipment (arrestors, radiators, bushings, conservators, etc.)
- Drain oil, vacuum fill with dry air, nitrogen or oil as required and pressure test transformer tank.
- Package components and transformer parts for shipment
- Prepare railroad car and/or truck for loading transformer unit and components
- Clean tank prior to final paint
- Load transformer unit to railcars or trucks
- Prepare shipping materials as required (blocking, tie rods, etc.)
- Move transformer unit from test floor to and within shipping area
- Move and switch rail cars
- Load and unload units as required from railcars and trucks
- Perform minor miscellaneous welding and burning functions as required (welder only)
- Apply paint primer and finish coats to transformers and parts per B.O.M. and instructions (painter only)
- Clean, operate and maintain paint systems equipment (painter only)
- Maintain paint and solvent waste streams per procedures (painter only)
- Assure proper marking, storage and transport of hazardous wastes
- Have the ability to look up non-conformances
- Write work orders for the repair of tooling and equipment.
- Follow all safety procedures and policies of the company
- Keep tools, equipment and work area neat and orderly
- Assist in training of new operators.
- May work in Med Power, Large Power or EHV product lines
- Perform work in other departments as needed
KNOWLEDGE, SKILLS & ABILITIES
- Utilize portable scaffold and steps, ladders, radial and band saw, vacuum cleaner, hydraulic jacks, threading machine, hi-press crimpers, grinder, stud gun, hand drill, pneumatic wrenches, mallet, sledge, pry bars, blocks, wire stripper, hand crimper, overhead jib crane, chains, slings, vacuum pumps, forklift truck, air bearings
- Able to operate various machines including wire crimpers, heat guns, air pallets, punches, sanders, band saws, grinders, stud welders, pipe threaders, shears, drilles, welders, plasma cutters, and other related equipment.
- Materials used in this position include tanks, covers, current transformers, tap changers, gear assemblies, oil gauges, pressure gauge, cabinets, housings, bushings, operating mechanisms, finished transformers, flanges, lightning arrestors, wood, steel rod, nitrogen and others. Breaker stands, breaker poles, breaker C.T.'s, galvanized steel beams, & SF6 gas
- Often works at heights up to 15’ or more.
- Work varies from working at ground level to working in, on top of, and around the sides of the transformer tank.
- Operations require mental and visual concentration to ensure compliance with engineering and quality specifications
- Position requires hand and eye coordination to make adequate welds meeting various welding specifications for in plant certification, if welding
- Must have the ability to access and work in confined spaces, which includes 18-24” manhole access.
EDUCATION AND EXPERIENCE
Required Education / Experience
High School Diploma or equivalent
CONTEXT
Reports To:
Production Supervisor
Number of Staff:
0
Department:
Manufacturing Operations
Pay Grade
L17
Location
Waukesha, WI
FLSA Status:
Non-Exempt
ADDITIONAL INFORMATION
Key Working Relationships
- Plant Supervision, Quality, Planning, etc.
- Engineering Organization, including mechanical, electrical and manufacturing engineering groups
Physical Demands
Must be able to stand for extended periods of time. Must be able to occasionally sit, walk. Climb, balance, push, pull, carry, work below waist level and foot use.
Working Conditions
Shop-floor located on large manufacturing plant.
Prolec-GE Waukesha, Inc. is an equal opportunity employer and makes employment decisions without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, genetic information, disability, protected veteran status, or any other reason prohibited by applicable law.
-
Shipper Painter
2 weeks ago
Waukesha, United States Prolec-GE Waukesha, Inc Full time**This role is hiring for 3rd shift (11pm-7am)** **Come to our Walk In Weds each week from 9am-4pm!** **JOB SUMMARY** The shipper role is an assembly role. It is the last to touch the product before it is sent out of our facility. This role involves dismantling each unit and getting it prepared for shipment. Welder: Must develop skills through training...
-
Shipper/painter - 2nd Shift
3 weeks ago
Waukesha, United States Prolec-GE Waukesha,Inc Full time**Job Title**: **Shipper** **Job Code**: 2112 **Job Level**: **4** **Department**: 1136 **Job Family**: **Ops/Manufacturing** **Revision Date**: 3/9/2022 **JOB SUMMARY** The shipper role is an assembly role. It is the last to touch the product before it is sent out of our facility. This role involves dismantling each unit and getting it prepared for...
-
Shipper/Painter - 2nd Shift
1 month ago
Waukesha, United States Prolec-GE Waukesha,Inc Full timeJob DescriptionJob DescriptionJob Title:Shipper Job Code:2112Job Level:4Department:1136Job Family:Ops/ManufacturingRevision Date:3/9/2022JOB SUMMARYThe shipper role is an assembly role. It is the last to touch the product before it is sent out of our facility. This role involves dismantling each unit and getting it prepared for shipment. Welder: Must...
-
Shipper Painter
2 weeks ago
Waukesha, United States Prolec-GE Waukesha, Inc Full time**This role is hiring for 2nd shift.** **Come to our Walk In Weds each week from 9am-4pm!** **JOB SUMMARY** The shipper role is an assembly role. It is the last to touch the product before it is sent out of our facility. This role involves dismantling each unit and getting it prepared for shipment. Welder: Must develop skills through training and...
-
Powder Coat Painter 2nd Shift
3 weeks ago
Waukesha, United States Generac Full timeAt Generac, our people help make the world safer, brighter, and more productive. We are united by our efforts to inspire change for a better world; impact our people and community; influence and achieve positive results; and innovate the industry. Our shared goals allow people with diverse backgrounds and points of view to work together, bringing our global...
-
Painter - 2nd Shift (Regulators)
3 weeks ago
Waukesha, United States Eaton Full timeEaton’s ES AMER ESS division is currently seeking a Painter - 2nd Shift (Regulators) to join team on Badger Dr. in Waukesha, WI! The hourly rate for this position is $24.50 per hour + $2.50/hr shift premium. The core hours are 3 pm - 11 pm. **This position is offering a sign-on bonus of $2,000*, less applicable withholding**. - Bonus terms: - Bonuses...
-
Spray Painter
4 weeks ago
Waukesha, United States Eaton Full timeEaton’s ES AMER ESS is currently seeking a Spray Painter - 2nd shift to join our team on Lincoln Ave. in Waukesha, WI! The hourly rate for this position is $24.50 per hour + $2.50/hr shift premium. The core hours are 3 pm - 11 pm. **This position is offering a sign-on bonus of $2,000*, less applicable withholding**. - Bonus terms: - Bonuses are being...
-
Painter - 1st Shift (E-coat)
3 weeks ago
Waukesha, United States Eaton Full timeEaton’s ES AMER ESS division is currently seeking a Painter - 1st Shift (E-coat) to join our team on Badger Dr. in Waukesha, WI! The hourly rate for this position is $19.75 per hour. The core hours are 7 am - 3 pm. Overtime may exceed these hours and can be mandatory at times. **Why work at Eaton?** **Below are a few of the outstanding benefits we...
-
Distribution Technician
4 weeks ago
Waukesha, United States QuadGraphics Full timeQuad is seeking Distribution Technicians (Forklift Operators) 3rd shift to join our Midwest Commingle Center in Waukesha, WI! The wage range is $17.50 - $19.00 depending on experience. Distribution Technicians are responsible for the following:Freigh Forklift Operator, Technician, Lift Operator, Distribution, 3rd Shift, Forklift, Manufacturing
-
Production Cleaner
4 weeks ago
Waukesha, United States SITE Staffing Full timeProduction Cleaner This position is responsible for the cleaning of all movable conveyors, base feeders, shaker tables and seasoners. Shift: 3rd, (9:45pm-6:15am)Pay: $20/hrJob Description: Conduct the forklift inspections at the beginning of the shift. Cleaning of all movable conveyors, base feeders, shaker tables and seasoners. Cleaning equipment as needed...
-
Production Cleaner
4 weeks ago
Waukesha, United States SITE Staffing Full timeProduction Cleaner This position is responsible for the cleaning of all movable conveyors, base feeders, shaker tables and seasoners. Shift: 3rd, (9:45pm-6:15am)Pay: $20/hrJob Description: Conduct the forklift inspections at the beginning of the shift. Cleaning of all movable conveyors, base feeders, shaker tables and seasoners. Cleaning equipment as needed...
-
Distribution Technician
1 month ago
Waukesha, United States Quad Full timeQuad is seeking Distribution Technicians (Forklift Operators) 3rd shift to join our Midwest Commingle Center in Waukesha, WI! The wage range is $17.50 - $19.00+ depending on experience. Distribution Technicians are responsible for the following: Freight-loading and unloading of finished products and materials from semi-trailers and auto-wrappers using a...
-
Distribution Technician
4 weeks ago
Waukesha, United States Quad Full timeQuad is seeking Distribution Technicians (Forklift Operators) 3rd shift to join our Midwest Commingle Center in Waukesha, WI! The wage range is $17.50 - $19.00+ depending on experience. Distribution Technicians are responsible for the following: + Freight-loading and unloading of finished products and materials from semi-trailers and auto-wrappers using a...
-
Distribution Technician
3 weeks ago
Waukesha, United States Quad Full timeQuad is seeking Distribution Technicians (Forklift Operators) 3rd shift to join our Midwest Commingle Center in Waukesha, WI! The wage range is $17.50 - $19.00+ depending on experience. Distribution Technicians are responsible for the following: Freight-loading and unloading of finished products and materials from semi-trailers and auto-wrappers...
-
Distribution Technician
6 days ago
Waukesha, United States Quad Full timeQuad is seeking Distribution Technicians (Forklift Operators) 3rd shift to join our Midwest Commingle Center in Waukesha, WI! The wage range is $17.50 - $19.00+ depending on experience. Distribution Technicians are responsible for the following: Freight-loading and unloading of finished products and materials from semi-trailers and auto-wrappers...
-
Packaging Operator
2 weeks ago
Waukesha, United States SITE Staffing Full timePackaging OperatorShift: 3rd, (9:45pm-6:15am) Pay: $20/hr Job Description: Set up/running of the bagging machines and cartoner per customer or internal specs. Help maintain the equipment by doing a general inspection of equipment, performing basic mechanical troubleshooting and reporting any repair needs to your supervisor. Conducting testing according to...
-
Distribution Technician
1 month ago
Waukesha, United States Quad Full timeQuad is seeking Distribution Technicians (Forklift Operators) 3rd shift to join our Midwest Commingle Center in Waukesha, WI! The wage range is $17.50 - $19.00+ depending on experience. Distribution Technicians are responsible for the following: Freight-loading and unloading of finished products and materials from semi-trailers and auto-wrappers...
-
Distribution Technician
4 weeks ago
Waukesha, United States Quad Full timeQuad is seeking Distribution Technicians (Forklift Operators) 3rd shift to join our Midwest Commingle Center in Waukesha, WI! The wage range is $17.50 - $19.00+ depending on experience. Distribution Technicians are responsible for the following: Freight-loading and unloading of finished products and materials from semi-trailers and auto-wrappers using a...
-
Distribution Technician
6 days ago
Waukesha, United States Quad Full timeQuad is seeking Distribution Technicians (Forklift Operators) 3rd shift to join our Midwest Commingle Center in Waukesha, WI! The wage range is $17.50 - $19.00+ depending on experience. Distribution Technicians are responsible for the following: Freight-loading and unloading of finished products and materials from semi-trailers and auto-wrappers...
-
Distribution Technician
7 days ago
Waukesha, United States Quad Full timeQuad is seeking Distribution Technicians (Forklift Operators) 3rd shift to join our Midwest Commingle Center in Waukesha, WI! The wage range is $17.50 - $19.00+ depending on experience. Distribution Technicians are responsible for the following: Freight-loading and unloading of finished products and materials from semi-trailers and auto-wrappers...