SMC2 Festooner Operator 1st Shift
4 weeks ago
SMC2 Festoooner, 1st Shift
6:00am - 2:30pm
$19.00/hr
JOB OVERVIEW:
Reporting to the Production Supervisor or Production manager of the Molding Products Division of Interplastic corporation, the Festooner operator manages the activities of the Festooner section of the SMC machine for smooth (efficient) manufacturing of a consistently high-quality product.
ESSENTIAL FUNCTIONS (MINIMUM REQUIREMENTS):
- BE A CHAMPION OF SAFETY and lead by example wearing ALL PPE required to perform job duties, (Safety Goggles, Proper uniforms, cut resistant gloves) and ensure production personnel are also following all plant safety rules.
- Identify unsafe acts and conditions. Resolve and report immediately to supervisor.
- Maintain good records of the day’s quality issues regarding the SMC product.
- Interact with Production Supervisor regarding daily production schedule.
- Stationed at the output end of SMC machine he/she coordinates with SMC operator and QC Technician for a smooth and efficient festooning or rolling of SMC.
- Setup Festooner in preparation for production running by stringing film through rollers and collecting scrap on startup.
- Proficient at operating the buttons of the SMC 2 Festooner and conveyor system.
- Inspecting all the SMC that is being loaded into the tote/box and straightening any bad folds, dog ears or misaligns in tote/box, observed streaking, contamination or other quality defects or issues.
- Checking your paperwork off each hour that you are inspecting and checking that the side seals are in fact sealed as the SMC is loading.
- Stamping (Or Initial and shift if you don’t have a stamp) on each label that gets put on the totes/box.
- Cleaning of the Dr. Boxes of paste and resetting the dams when they are cleaned and ready for next run.
- Cleaning of the festooner rollers when excess SMC that may have spilled out from the unsealed edge.
- Cleaning and sweeping of your festooner area once the runs are completed for the day.
- Dumping of any trash generated in the Festooner work station.
- Mark boxes containing cuts in the SMC.
- Helps SMC Operator to load the film during film change.
- Monitors SMC for streaks, dry glass, edge quality, and proper festooning.
- Cuts defective SMC from strip and places defective material into scrap box.
- Watches for “Glass outs”, “Paste outs”, etc. and gives verbal alarm when this happens.
- Keep the Production Supervisor informed of any issues that prevent achievement of the above goals.
- Responsible for handling and record-keeping of Hazardous Waste at or produced on SMC 2.
- Assists the Packer with building, and laying boxes as they get consumed during the compaction process when time permits.
- Assists with staging and cleaning the glass room when time permits.
- Monitor QC yellow tags and complete re-packs as time permits.
Other Duties: Please note this job description is not a comprehensive listing of all duties, activities, or responsibilities that are required of the employee for this job. Duties, activities, or responsibilities may change at any time with or without notice. Employees shall perform all tasks assigned by their manager.
REQUIRED EDUCATION, EXPERIENCE & SKILLS
- High school diploma (GED) or equivalent.
- 1 to 2 years of experience in a manufacturing plant environment preferred.
- Good verbal skills with an eye for detail.
- Multi‐task oriented, flexible, safety, quality, and customer committed.
- Ability to work independently while a team player complimenting individual and team objectives.
- Ability to drive Forklift.
- Ability to lift 50 lbs. and handle full 55-gallon drums.
- Ability to follow verbal and written instructions and procedures.
- Certified and prepared to wear respirator if and when directed.
-
1st & 2nd Shift Forklift Operator
4 weeks ago
South Bend, United States JBS S.A Full time**Description** *Position at Swift Prepared Foods* **1st & 2nd Shift Forklift Operators** Primary Focus: Pulling orders for outbounds, receiving inbound freight, loading trucks, putting away product in racks, unloading trucks in a safe work environment. Primary Duties and Responsibilities Include But Not Limited To: Pulling orders using a scan gun, putting...
-
1st Shift Warehouse Operations Supervisor
3 weeks ago
South Windsor, United States Aldi Inc. Full timeEstablishes and modifies daily work schedules considering warehouse needs. - Coordinates job activities and tasks of direct reports on a daily and/or extended basis, in addition to the timing and location of those tasks. - Oversees the daily receivin Operations Supervisor, Warehouse, Operations Manager, Operations, 1st Shift, Supervisor, Manufacturing,...
-
1st Shift WAREHOUSE SUPERVISOR
1 day ago
South Bend, United States JBS USA Holdings, Inc. Full timeDescription Position at JBS USA Job Title: 1st Shift Warehouse Supervisor Location: South Bend Our Mission: To be THE BEST in all we do. We are completely focused on our business, ensuring the BEST products and services to our customers, a relationship of trust with our suppliers and profitability for our shareholders. All this, we do to provide an...
-
Forklift Operator
7 days ago
South Beloit, United States TreeHouse Foods Full timeEmployee Type: Full time Location: IL South Beloit Job Type: Production Operations Job Posting Title: Forklift Operator - 1st shift About Us: TreeHouse Foods (NYSE: THS) is a leading manufacturer of private label packaged foods and beverages, operating a network of production facilities across the United States and Canada. At TreeHouse Foods, our commitment...
-
Packer 1st Shift- South Bend
6 days ago
South Bend, United States IP.com Full time1st Shift Packer 6:00am - 2:30pm $19.00-20.00/hr Ideal candidate will have several years experience driving fork trucks in narrow conditions. Reporting to the Production Supervisor of Molding Products, the Packer, aka the Material Handler of the SMC lines, manages the material handling activities in the scale, shrink-wrap, SMC machines, and Maturation areas...
-
Packer 1st Shift- South Bend
1 month ago
South Bend, United States Interplastic Corporation Full timeJob DescriptionJob Description1st Shift Packer6:00am - 2:30pm$19.00-20.00/hrIdeal candidate will have several years experience driving fork trucks in narrow conditions. Reporting to the Production Supervisor of Molding Products, the Packer, aka the Material Handler of the SMC lines,manages the material handling activities in the scale, shrink‐wrap, SMC...
-
2nd Shift Forklift Operator
3 days ago
South Bend, United States JBS USA Holdings, Inc. Full timeSanitation of warehouse and office area, assist maintenance department, grounds keeping. Work Environment/ Physical Demands: Able to lift 60 pounds, work in 26 degree temperature. Knowledge, Skills and Abilities: Forklift skills, basic math skills. E Forklift Operator, Lift Operator, 2nd Shift, Forklift, Operator, Shift, Manufacturing
-
Foam Fabricator, 1st shift
6 days ago
South Deerfield, United States Pelican Products Inc Full timeFoam Fabricator B, 1st Shift South Deerfield, MA, 147 N Main Street, South Deerfield, Massachusetts, United States of America Req #165 SUMMARY. Performs a variety of set up and operation duties to ensure cushions fit container configurations. WHAT YOU\'LL DO: - Works from part drawings, bill of materials, assembly drawings, written and/or verbal...
-
Shipping and Receiving Associate
4 weeks ago
West Bend, United States Spiros Industries Full timeSpiros Industries is a high volume spring manufacturer serving industrial, automotive and medical industries. We are located just outside West Bend, WI. We're a small company with a high concentration of fantastic people that work together to make each day a success. We are looking for someone to join our team as a Shipping and Receiving Associate on 1st...
-
Gaffney, South Carolina, United States Ply Gem Shutters & Accents Full timeJob Description JOB DETAILS Base Pay $16.00 per hour 1st Shift Monday - Friday, 7 am-3 pm Weekly Pay Benefits start Day 1 DUTIES AND RESPONSIBILITIES Load, touch-up, pair, pack, and stack all product. Load-Inspect Shutters for painted ends, breakage, or molding defects. Shutters should be loaded in a manner that maximizes line efficiency (No gaps...
-
Assembler B Injection Molding, 1st shift
6 days ago
South Deerfield, United States Pelican Products Inc Full timeASSEMBLER B, 1st SHIFT Performs a variety of repetitive operations to assemble and/or finish various types and sizes of plastic items and containers under direct supervision. PRIMARY DUTIES AND RESPONSIBILITIES Works from verbal and/or written instruction. May occasionally work from blueprint and/or assembly drawing. Uses hand tools, power tools and powered...
-
Maintenance Mechanic 2nd Shift
3 weeks ago
South Bend, United States Molding Products Full timeJob DescriptionJob DescriptionMaintenance Mechanic - MPDFull Time RegularManual LaborSouth Bend, IN, US$25.00 per hour + Shift Differential2nd Shift, 2:00pm - 10:30pmWill train on 1st shift. MOLDING PRODUCTS, LLC in South Bend, Indiana was established in 1978, supplying custom-formulated sheet molding compounds (SMC) to the compression molding industry. The...
-
Inspector Technician 1st Shift
4 weeks ago
South Elgin, United States Hoffer Plastics Full timeWant to be part of something special? We're Filling Important Jobs! Join an industry leader and innovator looking for people who want to make a difference. **Hoffer Plastics** is hiring for "Inspector Technician", "1st shift". Play a key role in producing plastic components that make everyday life possible, from transportation to food packaging to...
-
3rd shift Op
4 weeks ago
South Bend, United States PeopleLink Staffing Solutions Full timeJob DescriptionJob DescriptionProduction Worker Peoplelink Staffing Solutions in partnership with a prominent client in South Bend within the Industrial industry. This specific company in Mishawaka is a manufacturer of corrugated boxes, labeled boxes, specialty boxes, displays, and protective packaging products.Production Worker Job Summary: $15 -...
-
Inspector Technician 1st Shift
4 weeks ago
South Elgin, United States Hoffer Plastics Full timeJob DescriptionJob DescriptionWant to be part of something special? We're Filling Important Jobs!Join an industry leader and innovator looking for people who want to make a difference.Hoffer Plastics is hiring for "Inspector Technician", "1st shift".Play a key role in producing plastic components that make everyday life possible, from transportation to...
-
Assistant Principal
1 month ago
South Bend, United States South Bend Community School Corporation Full time**Assistant Principal** **POSITION TITLE**: Assistant Principal **SALARY RANGE**: Contract Salary **CONTRACT LENGTH**: Contractual Year **IMMEDIATE SUPERVISOR**: School Principal ***: Assists the principal, as a member of the administrative team, in leading the school community toward a safe and positive learning environment in which students, staff,...
-
Sanitation Worker
18 hours ago
South Bend, United States Pacific Seafood Group Full timeMaintain cleaning and sanitation in accordance with the company Master Sanitation Program. Utilize chemicals and cleaning agents to clean and sanitize processing area walls, floor, and equipment. Utilize refuse and sanitation tools in a proper and sa Sanitation, Worker, Forklift Operator, Processing, Lift Operator, Manufacturing, Social Services, Shift
-
Material Handler/Forklift Operator
3 weeks ago
West Bend, United States WB Warehousing & Logistics Full timeJob DescriptionJob DescriptionWB Warehouse is looking for technically skilled candidates with excellent attention to detail for the position of Forklift Operator. Forklift operators are responsible for optimizing loads to ensure operational efficiency, utilizing forklifts to ensure the proper warehousing of materials, and managing inventory by utilizing RF...
-
Material Handler
4 days ago
West Bend, United States Milwaukee Tool Full timeJob Description:The Material Handler is responsible for inventory storage, replenishment to manufacturing, and movement.Additionally, the Material Handler locates raw material and completes inventory reporting transactions in the ERP System for Work-In-Process (WIP) and Finished Goods.This job description lists major areas of responsibility and additional...
-
Material Handler
4 days ago
West Bend, United States Milwaukee Tool Full timeJob Description:The Material Handler is responsible for inventory storage, replenishment to manufacturing, and movement.Additionally, the Material Handler locates raw material and completes inventory reporting transactions in the ERP System for Work-In-Process (WIP) and Finished Goods.This job description lists major areas of responsibility and additional...