Shar Operator 2nd Shift

3 weeks ago

South Bend, United States Interplastic Corporation Full time
Job DescriptionJob Description

Shar Operator - 2nd

2:00pm - 10:30pm

$20.00 - $21.00/hr + Shift Premium


JOB OVERVIEW:

Reporting to the Production Supervisor or of Molding Products, the Shar Operator (Mixer) will supply both SMC1 and SMC2 with an A-Paste mixture that is needed for the compacting process by operating a series of operations through HMI screens directing the Shar mixers based on a batch sheet that is product specific.

ESSENTIAL FUNCTIONS (MINIMUM REQUIREMENTS):

  • Champions and leads by example wearing all PPE to perform job duties, (safety glasses/goggles, proper uniforms, cut resistant gloves, etc.).
  • Identifies unsafe acts and/or conditions. Resolve if safely possible and report to supervisor any unsafe act or condition.
  • Continuously monitor and react to spills particularly those generated by the Shar mixers. Complete Work Orders if the root cause is faulty equipment and communicate to supervisor. Any spill greater than 1 gallon needs to be reported to the Production Supervisor, Production Manager, or HSE Manager.
  • Follow the batch sheet provided by the Production Supervisor without deviation.
  • Hand weigh small ingredients to be added into the batch manually.
  • Dump powders that are in bags into hoppers to be used at the shar mixers.
  • Verify the drums, contents and quantities, before starting the Shar operation. Compare the labels on the drums to the batch sheet to make sure they are the same. If there is any difference, contact your supervisor. At the end of your shift, be sure all empty drums have been replaced for the incoming Shar Operator unless directed differently by your supervisor.
  • Locate materials in the warehouse and retrieve with a forklift to be used at the Shar mixers.
  • Record lot numbers, weights pulled from the HMI screen, any downtime, viscosity checks for each mix, Hold tank number material is to be transferred to, and any variances on the batch sheet.
  • Identify, verify, and label the Hold Tank that you will pump the A-paste into before transferring product. Label Hold Tanks with Schedule, batch, and formula numbers when transferring into them.
  • Label and dispose of scrap material into the proper waste stream.
  • Operate the supersack station when needed.
  • Replace empty material drums with new unless directed by supervisor to do something other.
  • Fill catalyst kettles on a daily basis. Use a supervisor or Lead to verify the material before adding.
  • Help maintain the cleanliness of the catalyst room.
  • Dump trash hoppers as they fill on a daily basis.
  • Retrieve and submit samples to the QC lab for testing.
  • Do quality checks for viscosity and temps on every batch.
  • Communicate with the maintenance department and the Production supervisor when machinery breaks down.
  • Restock pre-weigh station with raw materials, buckets, pail liners, and pre-weigh containers as needed.
  • Report on stock of buckets, pre-weigh containers, and pail liners so that we may get more ordered.
  • Fill out daily 6’s checklist sheets that monitors progress for the day.
  • Fill out daily downtime reports for lost time on the machinery.
  • Log completed batch numbers and time of completion at QC check table when doing the viscosity checks.
  • Turn in all completed paperwork at shifts end.
  • Generate work orders for machine issues.
  • Communicate with oncoming Production Supervisor, and Shar Operator as to where the shar’s stand and any issues you have had throughout the day.
  • Always be present when the Shar is transferring product and always seek Maintenance or Supervisory guidance and assistance before attempting to do anything manual on the Shar.

Other Duties: Please note this job description is not a comprehensive listing of all duties, activities, or responsibilities that are required of the employee for this job. Duties, activities, or responsibilities may change at any time with or without notice. Employees shall perform all tasks assigned by their manager.

REQUIRED EDUCATION, EXPERIENCE & SKILLS

  • High School Diploma (GED) or equivalent.
  • Must have a basic understanding of manufacturing processes, equipment uses, and a general knowledge of current Good Manufacturing Practices.
  • 2+ years of experience in a manufacturing plant environment, preferably in a chemical, SMC, or Extruder field.
  • Self-Starter and Multi-Task oriented.
  • Good verbal skills.
  • Understanding of Chemical Process Equipment and technology.
  • Willing to get “hands dirty”.
  • Ability to drive a forklift.
  • Ability to lift 50lbs.
  • Ability to make snap (quick) decisions.
  • Must be able to wear a respirator.
  • Good record keeping practices.

  • Shar Operator 2nd Shift

    3 weeks ago

    South Bend, United States Interplastic Corporation Full time

    Job DescriptionJob DescriptionShar Operator - 2nd Shift2:00pm - 10:30pm$20.00 - $21.00/hr + $2.00 Shift Premium*Must be able to train on different shift before moving to 2nd *JOB OVERVIEW:Reporting to the Production Supervisor or of Molding Products, the Shar Operator (Mixer) will supply both SMC1 and SMC2 with an A-Paste mixture that is needed for the...

  • 1st & 2nd Shift Forklift Operator

    3 weeks ago

    South Bend, United States JBS S.A Full time

    **Description** *Position at Swift Prepared Foods* **1st & 2nd Shift Forklift Operators** Primary Focus: Pulling orders for outbounds, receiving inbound freight, loading trucks, putting away product in racks, unloading trucks in a safe work environment. Primary Duties and Responsibilities Include But Not Limited To: Pulling orders using a scan gun, putting...

  • Maintenance Mechanic 2nd Shift

    2 weeks ago

    South Bend, United States Molding Products Full time

    Job DescriptionJob DescriptionMaintenance Mechanic - MPDFull Time RegularManual LaborSouth Bend, IN, US$25.00 per hour + Shift Differential2nd Shift, 2:00pm - 10:30pmWill train on 1st shift. MOLDING PRODUCTS, LLC in South Bend, Indiana was established in 1978, supplying custom-formulated sheet molding compounds (SMC) to the compression molding industry. The...

  • Quality Lab Technician

    2 weeks ago

    South Bend, United States IP Corporation Full time

    Quality Lab Technician - Molding Products2nd Shift, 2:00pm - 10:30pm$21.00-22.00/hr + $2.00 Shift PremiumJOB OVERVIEW:The Quality Technician is responsible for actively monitoring, measuring, and recording data throughout the SMC production cycle - from preproduction checks to molding and testing the finished product. The Technician must be reliable,...

  • Quality Lab Technician

    3 weeks ago

    South Bend, United States Interplastic Corporation Full time

    Job DescriptionJob DescriptionQuality Lab Technician - Molding Products2nd Shift, 2:00pm - 10:30pm$21.00-22.00/hr + $2.00 Shift PremiumJOB OVERVIEW: The Quality Technician is responsible for actively monitoring, measuring, and recording data throughout the SMC production cycle – from preproduction checks to molding and testing the finished product. The...

  • Public Area Attendant

    7 days ago

    South Bend, United States Hilton Hotels & Resorts Full time

    . As a Public Area Attendant, you would be responsible for cleaning and maintaining all public areas of the hotel and responding to guest requests in the hotel"s continuing effort to deliver outstanding guest service and financial profitability. S Attendant, 2nd Shift, Suite, Hospitality

  • Food Clerk

    2 weeks ago

    West Bend, United States Meijer, Inc. Full time

    Do you enjoy delivering a quality customer experience? Then join the Meijer Family as a Food Clerk in our Deli or Produce Department at our West Bend, WI Store Location! As a Food Clerk, you will be responsible for delivering remarkable customer serv Food Clerk, 2nd Shift, Clerk, Customer Experience, Customer Service, Food, Retail, Grocery

  • Warehouse Associate

    7 days ago

    Summerville, South Carolina, United States Bosch Group Full time

    Job Description Daily operation of powered industrial trucks or other material handling equipment.  Daily use of hand held RF scanner. Daily use of good judgement to comply with instructions or prescribed routines, methods, or practices involving the making of minor decisions.  Regular participation in special tasks as assigned such as 6S.  Key...

  • Machine Operator Mold Setter 2nd shift

    4 weeks ago

    Gaffney, South Carolina, United States Cornerstone Building Brands Full time

    Job Description JOB DETAILS Base pay $21.00 per hour, plus $1.00 shift differential 2nd shift Monday- Friday 3pm- 11pm Benefits start day 1 Weekly Pay DUTIES AND REQUIREMENTS Assist to set scheduled molds in presses for production and sample orders. Connect up all water lines to molds to ensure proper cooling without delays occurring due to molds...

  • Festooner Operator 3rd Shift

    3 weeks ago

    South Bend, United States Interplastic Corporation Full time

    Job DescriptionJob DescriptionFestooner - 3rd Shift10:00pm - 6:30am$19.00/hr + Shift PremiumJOB OVERVIEW:Reporting to the Production Supervisor or Production manager of the Molding Products Division of Interplastic corporation, the Festooner operator manages the activities of the Festooner section of the SMC machine for smooth (efficient) manufacturing of a...

  • Machinist - 2nd & 3rd shifts (West Bend)

    1 week ago

    West Bend, United States Metalcraft Full time

    Machinist - 2nd & 3rd shifts (West Bend) Job Locations US-WI-West Bend Job ID 2024-3588 # of Openings 6 Category Manufacturing Type Regular Full-Time Overview Reporting to the Machine Center Manager, the Machinist produces machined parts by setting up, and operating a computer numerical...

  • Roto Cast, Assembler B

    1 week ago

    South Deerfield, United States Pelican Products Inc Full time

    ROTO CAST ASSEMBLER B - 2nd SHIFT OVERVIEW Performs a variety of operations to assemble and finish a range of types and sizes of plastic containers and other items. WHAT YOU\'LL DO: Works from engineering prints, bills of materials, assembly drawings, written and/or verbal instructions. Performs standard set up and lays out work area to assemble, or to...

  • SMC Operator 1st Shift

    3 weeks ago

    South Bend, United States Interplastic Corporation Full time

    Job DescriptionJob DescriptionSMC Machine Operator - 1st Shift6:00am - 2:30pm $20-21.00/hrJob DescriptionThe SMC operator manages the activities of the SMC machine and supporting equipment contributing toefficient manufacture of consistently high-quality SMC meeting or exceeding customer specifications with safety operations for the entire crew first and...

  • Brake Press Operator

    3 days ago

    West Bend, United States Metalcraft Full time

    Brake Press Operator - WB (2nd & 3rd) Job Locations US-WI-West Bend Job ID 2024-3622 # of Openings 4 Category Manufacturing Type Regular Full-Time Overview Reporting to the Brake Press Supervisor this role is primarily responsible for the daily setup and operation of Cincinnati hydraulic...

  • REGISTERED NURSE

    2 weeks ago

    South Hutchinson, KS 67505, USA, United States Tyson Foods, Inc. Full time

    Occupational health nursing is the specialty practice that delivers health and safety programs and services to workers and worker populations. The practice focuses on promotion and restoration of health, prevention of illness and injury, and protecti Registered Nurse, Nurse, Registered, 2nd Shift, Manufacturing, Healthcare, Skills

  • Crane Operator

    2 days ago

    South Milwaukee, United States BuildSubmarines.com Full time

    Career Area: Operations Job Description: Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about...

  • Forklift operator

    7 days ago

    South Bend, United States Keurig Dr Pepper Full time

    Forklift Operator - South Bend, IN The Forklift Operator is responsible for loading, unloading, staging, pulling and distributing pallets of Keurig Dr Pepper product supplies while meeting productivity requirements. Shift and Schedule: Full-timeMonday- Friday2:00PM - finishedFlexibility to work overtime and weekend as needed is requiredPosition...

  • PM Forklift Operator for the Freezer

    4 days ago

    South Windsor, United States Performance Food Group Company Full time

    We are searching for a Lift Operator to work in the freezer on 2nd shift. The hours are Sunday through Thursday (4:30 pm until workload is finished)We Deliver the Goods:Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employe Forklift Operator, Lift Operator, Freezer, Forklift, Operator, High School, Manufacturing

  • PM Forklift Operator for the Freezer

    5 days ago

    South Windsor, United States Performance Food Group Full time

    We are searching for a Lift Operator to work in the freezer on 2nd shift. The hours are Sunday through Thursday (4:30 pm until workload is finished)We Deliver the Goods:Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employe Forklift Operator, Lift Operator, Freezer, Forklift, Operator, High School, Manufacturing

  • Assistant Principal

    4 weeks ago

    South Bend, United States South Bend Community School Corporation Full time

    **Assistant Principal** **POSITION TITLE**: Assistant Principal **SALARY RANGE**: Contract Salary **CONTRACT LENGTH**: Contractual Year **IMMEDIATE SUPERVISOR**: School Principal ***: Assists the principal, as a member of the administrative team, in leading the school community toward a safe and positive learning environment in which students, staff,...