Quality Inspector 2

4 weeks ago

Glastonbury, United States HANWHA AEROSPACE USA LLC Full time
Job DescriptionJob Description

Quality Inspector 2 – Non-exempt

Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents.

We looking for an Aerospace Inspector to perform 1st piece, in-process and final inspection on aircraft engine components for compliance with engineering drawings, customer requirements and company specifications before or after manufacturing processes. This will also include performing inspection procedures including checking dimensions of related surfaces, holes, etc., as well as assessment of finish and detection of undesirable nonconformances. They will be required to approve items within specifications and recommend disposition of items not meeting standards. They will be responsible for verifying identification of part and supplier (internal or outside supplier).

Ability to visually, dimensionally and final inspect major rotating components such as disks, shafts, air seals drums, and hubs. Work with shop personnel to assist operators in setting up gages, and performing in-process inspections

Location: Glastonbury, CT

Reports to: Manager, Quality


Essential Duties & Responsibilities

Reasonable accommodations may be made to enable individuals with disabilities to perform.

Obtains blueprints and company specification sheets for the item and particular order.

Must be capable of reviewing internal operation sheets against customer blueprints.

Determines the inspection procedure to ensure complete verification of specifications and dimensions.

Obtains necessary fixtures, gauges, and indicators to check parts for compliance with specifications, within prescribed tolerances.

Completes specific assurance checklists during the process. Performs dimensional checks of parts while in the machine when necessary.

Rejects unacceptable items, documents nonconformance, and moves the part to the quality clinic.

Completes required company paperwork on machined parts inspection activity.

Ability to read and understand work instructions such as Op Sheets, Engine Manuals, Customer Purchase Order Requirements, etc.

Possess a high level of knowledge to determine the proper method of inspection to be used for each part that is being processed and/or inspected.

Ability to verify conformance of machined features using measuring instruments such as a micrometer, caliper, swing gage, etc.

Accurate documentation of all inspections (Ex: Receiving, In-Process, Final) and ability to work with operators to ensure all requirements are met.

Communicates with co-workers, colleagues, and Supervisors to receive instructions and/or guidance and coordinate activities.

Organize and maintain the inspection department, gaging methods, etc.

Must be able to work independently and efficiently to meet customer requirements.

Willing to cross-train across others in-shop disciplines/ inspection disciplines

Willingness to work with shop personnel to induct incoming parts and aid in the expeditious shipment of critical parts

Adaptability to different inspection methods

Familiarity with Root Cause Corrective Action tools (5 why’s, Fishbone, etc.)

Performs other related duties or responsibilities as requested or required, whether or not specifically mentioned in this job description.


Requirements:

Must be a “US Person” as defined by US Government and able to work without restriction with ITAR related data.

High school diploma or general education degree (GED) required

3+ years’ experience as an aerospace part inspector

Expert knowledge of blueprint reading, machinery limitations, and bench inspections

GD&T knowledge required

DPRV certification preferred

Ability to read and comprehend simple instructions, short correspondence, and memos.

Must have visual acuity enough to be able to read machine dials, gages, Op sheets, and precision measuring equipment.

Experience with Shadow Graph and CMM inspection or ability to train on is a plus

AAP Statement

Hanwha Aerospace USA, is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, Sexual Orientation, and Gender Identity or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination.

*Subject to change with or without notice*


Monday - Friday
3:30PM - 12:00AM

  • Quality Inspector

    2 weeks ago

    Glastonbury, United States Turbine Kinetics Inc. Full time

    Responsibilities - Quality Inspector: - Read and interpret specifications and engineering drawings to understand requirements. - Perform inspection on aerospace products as described in written work instructions. - Utilize standard inspection equipment such as micrometers, calipers, height gages, dial indicators, plug gages, etc. - Performs complex and...

  • Quality Inspector

    2 weeks ago

    Glastonbury, United States Turbine Kinetics Inc. Full time

    Responsibilities - Quality Inspector: - Read and interpret specifications and engineering drawings to understand requirements. - Perform inspection on aerospace products as described in written work instructions. - Utilize standard inspection equipment such as micrometers, calipers, height gages, dial indicators, plug gages, etc. - Performs complex and...

  • Quality Inspector

    1 month ago

    Glastonbury, United States HEICO Full time

    Job Description Responsibilities - Quality Inspector: Read and interpret specifications and engineering drawings to understand requirements.Perform inspection on aerospace products as described in written work instructions.Utilize standard inspection equipment such as micrometers, calipers, height gages, dial indicators, plug gages, etc.Performs complex and...

  • Quality Inspector

    2 weeks ago

    Glastonbury, United States HEICO Full time

    Job Description Responsibilities - Quality Inspector: Read and interpret specifications and engineering drawings to understand requirements.Perform inspection on aerospace products as described in written work instructions.Utilize standard inspection equipment such as micrometers, calipers, height gages, dial indicators, plug gages, etc.Performs complex and...

  • Quality Inspector 2

    3 weeks ago

    Glastonbury, United States HANWHA AEROSPACE USA LLC Full time

    Job DescriptionJob DescriptionQuality Inspector 2 – Non-exemptHanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development...

  • Quality Inspector 2

    2 weeks ago

    Glastonbury, United States HANWHA AEROSPACE USA LLC Full time

    Job DescriptionJob DescriptionQuality Inspector 2 – Non-exemptHanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development...

  • Quality Inspector

    1 week ago

    Glastonbury, United States Aerotek Full time

    Job Title: Quality Inspector Job Description As a Quality Inspector, you will perform a variety of inspection procedures including checking dimensions of surfaces, holes, and other components, as well as assessing finishes and detecting nonconformance's. You will approve items that meet specifications and recommend dispositions for those that do not. Your...

  • Quality Inspector

    1 month ago

    Glastonbury, United States International Staff Consulting Full time

    Shift: 1st Hours: 8:00am-5pmType: Full-Time Mode: Direct Placement PAY RANGE:$20-23 INDUSTRY: MANUFACTURING Our client is looking for a responsible Quality Inspector. This is a Direct placement position with our key manufacturing client. To be considered for this role, you will need a High School Diploma or GED along with 2-3 years of sheet metal...

  • Quality Inspector

    2 weeks ago

    Glastonbury, United States International Staff Consulting Full time

    Shift: 1st Hours: 8:00am-5pmType: Full-Time Mode: Direct Placement PAY RANGE:$20-23 INDUSTRY: MANUFACTURING Our client is looking for a responsible Quality Inspector. This is a Direct placement position with our key manufacturing client. To be considered for this role, you will need a High School Diploma or GED along with 2-3 years of sheet metal...

  • First Article Inspector

    4 weeks ago

    Glastonbury, United States HEICO Corporation Full time

    Job Description Responsibilities - Quality Inspector: Read and interpret specifications and engineering drawings to understand requirements. Perform inspection on aerospace products as described in written work instructions. Utilize standard inspection equipment such as micrometers, calipers, height gages, dial indicators, plug gages, etc. Performs...

  • First Article Inspector

    3 weeks ago

    Glastonbury, United States HEICO Full time

    Job Description Responsibilities - Quality Inspector: Read and interpret specifications and engineering drawings to understand requirements. Perform inspection on aerospace products as described in written work instructions. Utilize standard inspection equipment such as micrometers, calipers, height gages, dial indicators, plug gages, etc. Performs complex...

  • First Article Inspector

    2 weeks ago

    Glastonbury, United States HEICO Corporation Full time

    Job Description Responsibilities - Quality Inspector: Read and interpret specifications and engineering drawings to understand requirements. Perform inspection on aerospace products as described in written work instructions. Utilize standard inspection equipment such as micrometers, calipers, height gages, dial indicators, plug gages, etc. Performs...

  • Quality Inspector 2nd Shift- Manufacturing

    2 weeks ago

    Glastonbury, United States Projects Inc Full time

    Job Type Full-time Description Projects Inc. is seeking a highly skilled and detail-oriented Manufacturing Quality Control Inspector to join our team on 2nd Shift with a shift differential added to base pay. We are a manufacturer of complex small, machined components for the Aerospace and Power Systems industries and has been in business for over fifty...

  • Quality Inspector 2nd Shift- Manufacturing

    2 weeks ago

    Glastonbury, United States Projects Inc Full time

    Job Type Full-time Description Projects Inc. is seeking a highly skilled and detail-oriented Manufacturing Quality Control Inspector to join our team on 2nd Shift with a shift differential added to base pay. We are a manufacturer of complex small, machined components for the Aerospace and Power Systems industries and has been in business for over fifty...

  • Toolmaker 2

    3 weeks ago

    Glastonbury, United States HANWHA AEROSPACE USA LLC Full time

    Job DescriptionJob DescriptionToolmaker 2 – Non-ExemptHanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state of the art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to...

  • Toolmaker 2

    4 weeks ago

    Glastonbury, United States HANWHA AEROSPACE USA LLC Full time

    Job DescriptionJob DescriptionToolmaker 2 – Non-ExemptHanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state of the art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to...

  • Toolmaker 2

    2 weeks ago

    Glastonbury, United States HANWHA AEROSPACE USA LLC Full time

    Job DescriptionJob DescriptionToolmaker 2 – Non-ExemptHanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state of the art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to...

  • Toolmaker 2

    2 weeks ago

    Glastonbury, United States HANWHA AEROSPACE USA LLC Full time

    Job DescriptionJob DescriptionToolmaker 2 – Non-ExemptHanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state of the art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to...

  • Maintenance Position

    4 weeks ago

    Glastonbury, United States Connecticut REAP Full time

    Job Description: GLASTONBURY PUBLIC SCHOOLS Glastonbury, Connecticut NOTICE OF VACANCY POSITION: Maintainer - Licensed Plumber / HVAC Technician, District-Wide 40 hours per week HOURLY WAGES: $35.73 per hour and full benefits as provided in Custodial/Maintenance and General Service Employee' Union Agreement. DUTIES: * Plumbing experience includes but...

  • Maintenance Position

    2 weeks ago

    Glastonbury, United States Connecticut REAP Full time

    Job Description: GLASTONBURY PUBLIC SCHOOLS Glastonbury, Connecticut NOTICE OF VACANCY POSITION: Maintainer - Licensed Plumber / HVAC Technician, District-Wide 40 hours per week HOURLY WAGES: $35.73 per hour and full benefits as provided in Custodial/Maintenance and General Service Employee' Union Agreement. DUTIES: * Plumbing experience includes but...