Electronics Test Technician

4 weeks ago

Windsor Mill, United States Zentech Full time
Job DescriptionJob Description

Position Description:

The Radio Frequency (RF) Test Technician will support the manufacturing organization through performing alignment, troubleshooting, and characterization of RF and Microwave circuits. This role is responsible for executing test plans, troubleshooting high density component RF circuitry, and generating accurate test data intended for internal and external customer use. Set up standard or automated test equipment to conduct functional, operational, environmental, and life tests to evaluate performance and reliability of prototype or production assemblies. Analyze test results and repair or adjust assemblies according to analysis. Recommend corrections and improvements to test procedures to simplify testing and/or assembly processes.

 

Major Responsibilities Include:

  • Conduct functional tests to measure the performance of production electronic systems, assemblies, and sub-assemblies.
  • Test commercial and complex (mil-spec) electronic assemblies with pre-production or prototype documentation.
  • Compare test results with specifications and accurately record test data.
  • Analyze defective units to determine root cause of failure.
  • Help develop processes, tooling and fixtures as required.
  • Ensure that all test equipment calibration requirements are maintained.
  • Effectively manage time, and complete all tasks as assigned by the supervisor.

 

Educational Experience:

BS or Associate's degree (A.A.) from accredited college or technical school in Electrical Engineering or similar discipline (EE/EET/ME preferred), or equivalent military training in Electronics Engineering Technology or related field, and five years related experience.

 

Experience/Technical Requirements:

  • Technical knowledge and skills in troubleshooting down to the component level; solid understanding and working knowledge of RF test equipment such as Network Analyzers, Spectrum Analyzers, Data Error Analyzers, RF generators, etc.
  • Strong component-level troubleshooting skills.
  • Experience at performing various RF characterization measurements such as; Phase Noise, Spectral Characterization, Noise Figure, RF Power and Bit Error Rate.
  • Experience in alignment and troubleshooting of various RF circuits such as: Modulators, RF amplifiers, Diplexers, Filters, Oscillators, Synthesizers, etc.
  • RF experience to 8 GHz troubleshooting skills are desired.
  • Knowledge of electrical test methodology (e.g., stand alone bench, automated, functional test), planning, procedures, equipment (e.g., multimeter, oscilloscope, bus analyzer, automated test systems) and result validation criteria (e.g., pass/fail, control limits, tolerances).
  • Knowledge of manufacturing work flow and MRP systems or similar.
  • Knowledge of Microsoft Office Suite (Excel, Word).
  • A general understanding of the production of printed wiring assemblies is desirable but not required.

 

Other Requirements:

Must be able to multitask in a fast-paced environment effectively. Must have a positive attitude with a desire to excel in a team-oriented culture. Availability and willingness to work alternate shifts as necessary is required.

 

Physical Demands

Must have good color perception, eyesight, and the ability to effectively use magnification aids such as binocular microscopes and related test equipment.  Must have good hand-eye coordination, and the ability to use basic hand tools. Must be able to comfortably lift up to 25 pounds. While performing the duties of this job, the employee is regularly required to sit; use hands, reach with hands and arms, bend and twist to lift and reload items, and talk or hear.

 

This position may require exposure to information which is subject to US export control regulations, i.e. the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). All applicants must be U.S. persons within the meaning of U.S. regulations.



Job Posted by ApplicantPro

  • Electronics Test Technician

    3 weeks ago

    Windsor Mill, United States Zentech Full time

    Job DescriptionJob DescriptionPosition Description:Set up or devise standard or automated test equipment to conduct functional, operational, environmental, and life tests to evaluate performance and reliability of prototype or production assemblies. Analyze test results and repair or adjust assemblies according to analysis. Recommend corrections and...

  • Electronics Test Technician

    4 weeks ago

    Windsor Mill, United States Zentech Full time

    Job DescriptionJob DescriptionPosition Description:Set up or devise standard or automated test equipment to conduct functional, operational, environmental, and life tests to evaluate performance and reliability of prototype or production assemblies. Analyze test results and repair or adjust assemblies according to analysis. Recommend corrections and...

  • 373 - Rf Electronics Technician

    2 months ago

    Windsor Mill, United States Azure Summit Technology Full time

    **Are you in?** Do you work well in a team environment and on your own as an individual contributor? Do you know how to set the bar high and achieve goals for yourself and bring others along with you? Do you work hard and play hard? Do you want to help the company succeed and build your skill set and further your career at the same time? Azure Summit...

  • 373 - Rf Electronics Technician

    3 weeks ago

    Windsor Mill, United States Azure Summit Technology Full time

    **Are you in?** Do you work well in a team environment and on your own as an individual contributor? Do you know how to set the bar high and achieve goals for yourself and bring others along with you? Do you work hard and play hard? Do you want to help the company succeed and build your skill set and further your career at the same time? Azure Summit...

  • Electronics Technician

    7 days ago

    Windsor Mill, United States Zentech Manufacturing I Full time

    Zentech is one of the leading and most highly certified U.S. based Electronics Manufacturing Services (EMS) providers in North America. We support original equipment manufacturers (OEMs) of medical devices, aerospace and defense products, and industrial equipment with engineering & manufacturing solutions. These solutions include product design, printed...

  • Lenel Electronic Security Technician

    3 weeks ago

    Windsor Mill, United States Insight Global Full time

    Our client is looking for a Lenel Certified Security Technician to sit in Windsor Mill, MD supporting a large federal customer. This induvial will be responsible for providing a full range of security system installations, monitoring, maintenance, testing and inspections for all systems. This individual will also have experience working with Lenel security...

  • Electronics Technician

    4 weeks ago

    Windsor Mill, United States Zentech Manufacturing I Full time

    Job DescriptionJob DescriptionZentech is one of the leading and most highly certified U.S. based Electronics Manufacturing Services (EMS) providers in North America. We support original equipment manufacturers (OEMs) of medical devices, aerospace and defense products, and industrial equipment with engineering & manufacturing solutions. These solutions...

  • Electronics Technician

    3 weeks ago

    Windsor Mill, United States Zentech Manufacturing I Full time

    Job DescriptionJob DescriptionZentech is one of the leading and most highly certified U.S. based Electronics Manufacturing Services (EMS) providers in North America. We support original equipment manufacturers (OEMs) of medical devices, aerospace and defense products, and industrial equipment with engineering & manufacturing solutions. These solutions...

  • Electronic Security Systems Technician

    1 week ago

    Windsor Mill, United States Securityhunter Full time

    Location: Baltimore, MD Summary: **Responsibilities**: - Install, configure, and maintain electronic security systems including IDS and CCTV equipment in accordance with agency standards and guidelines. - Conduct regular inspections, tests, and maintenance of security systems to ensure optimal performance and compliance with regulations. - Troubleshoot and...

  • Electronics Inventory Associate

    3 weeks ago

    Windsor Mill, United States Zentech Manufacturing I Full time

    Job DescriptionJob DescriptionLooking to excel in your career and grow professionally in a thriving business? Zentech is rapidly growing and is seeking experienced professionals in several areas. Zentech is one of the leading and most highly certified U.S. based Electronics Manufacturing Services (EMS) providers in North America. We support original...

  • Electronics Inventory Associate

    4 weeks ago

    Windsor Mill, United States Zentech Manufacturing I Full time

    Job DescriptionJob DescriptionLooking to excel in your career and grow professionally in a thriving business? Zentech is rapidly growing and is seeking experienced professionals in several areas. Zentech is one of the leading and most highly certified U.S. based Electronics Manufacturing Services (EMS) providers in North America. We support original...

  • Electronics Quality Control Inspector

    4 weeks ago

    Windsor Mill, United States Zentech Manufacturing I Full time

    Job DescriptionJob DescriptionZentech is one of the leading and most highly certified U.S. based Electronics Manufacturing Services (EMS) providers in North America. We support original equipment manufacturers (OEMs) of medical devices, aerospace and defense products, and industrial equipment with engineering & manufacturing solutions. These solutions...

  • Electronics Quality Control Inspector

    3 weeks ago

    Windsor Mill, United States Zentech Manufacturing I Full time

    Zentech is one of the leading and most highly certified U.S. based Electronics Manufacturing Services (EMS) providers in North America. We support original equipment manufacturers (OEMs) of medical devices, aerospace and defense products, and industrial equipment with engineering & manufacturing solutions. These solutions include product design, printed...

  • Electronics Quality Control Inspector

    3 weeks ago

    Windsor Mill, United States Zentech Manufacturing I Full time

    Zentech is one of the leading and most highly certified U.S. based Electronics Manufacturing Services (EMS) providers in North America. We support original equipment manufacturers (OEMs) of medical devices, aerospace and defense products, and industrial equipment with engineering & manufacturing solutions. These solutions include product design, printed...

  • Electronics Quality Control Inspector

    7 days ago

    Windsor Mill, United States Zentech Manufacturing I Full time

    Zentech is one of the leading and most highly certified U.S. based Electronics Manufacturing Services (EMS) providers in North America. We support original equipment manufacturers (OEMs) of medical devices, aerospace and defense products, and industrial equipment with engineering & manufacturing solutions. These solutions include product design, printed...

  • Electronics Quality Control Inspector

    3 weeks ago

    Windsor Mill, United States Zentech Manufacturing I Full time

    Job DescriptionJob DescriptionZentech is one of the leading and most highly certified U.S. based Electronics Manufacturing Services (EMS) providers in North America. We support original equipment manufacturers (OEMs) of medical devices, aerospace and defense products, and industrial equipment with engineering & manufacturing solutions. These solutions...

  • Electronic Repair Technician II 2nd Shift

    1 month ago

    Windsor Locks, United States Raytheon Technologies Corporation Full time

    Work from blueprints, schematics, parts lists, wire lists, unit history sheets and other written and verbal instructionswithin established methods and procedures. Plan and perform disassembly, rework, repair, assembly, inspection, simple test, final Repair Technician, Technician, Electronic, 2nd Shift, Operations, Repair, Manufacturing

  • Electronic Repair Technician II 2nd Shift

    3 weeks ago

    Windsor Locks, United States Raytheon Technologies Corporation Full time

    Work from blueprints, schematics, parts lists, wire lists, unit history sheets and other written and verbal instructionswithin established methods and procedures. Plan and perform disassembly, rework, repair, assembly, inspection, simple test, final Repair Technician, Technician, Electronic, 2nd Shift, Operations, Repair, Manufacturing

  • Master Technician

    4 weeks ago

    Windsor Locks, United States Collins Aerospace Full time

    **Date Posted**: 2024-04-30 **Country**: United States of America **Location**: 01: Building 01 Windsor Locks One Hamilton Road, Windsor Locks, CT, 06096 USA **Position Role Type**: Onsite Do you want to be a part of something bigger? A team whose impact stretches across the world, and even beyond? At Collins Aerospace, our Mission Systems team helps...

  • Master Technician

    1 day ago

    Windsor Locks, United States Collins Aerospace Full time

    **Date Posted**: 2024-04-30 **Country**: United States of America **Location**: 01: Building 01 Windsor Locks One Hamilton Road, Windsor Locks, CT, 06096 USA **Position Role Type**: Onsite Do you want to be a part of something bigger? A team whose impact stretches across the world, and even beyond? At Collins Aerospace, our Mission Systems team helps...