Development Assembler

4 weeks ago

Fort Totten, United States Sioux Manufacturing Full time
Job DescriptionJob DescriptionSalary: 19.85

PRIMARY RESPONSIBILITIES
• Correctly follow applicable work instructions/processes, such as work order, traveler, MPS, engineer directive and other documented work instructions.
• Report on assigned work orders.
• Cut, lay-up and otherwise prepare composite materials for molding or other processing.
• Prep metal as needed for molding operations.
• Operate oven controller as instructed.
• Operate vacuum control system and install vacuum ports.
• Assemble bonded parts and additional hardware as documented instructions require.
• Operate hydraulic presses in the processing of composite materials.
• Correctly inspect parts per documented instructions.
• When necessary, reject and document defective material.
• Communicate current work order status to oncoming shift operators.
• While following all safety procedures and processes, properly maintain production equipment.
• Continually keep work areas clean, including sweeping, clearing tables of debris, solvent cleaning bonding equipment, and assisting others in the process as needed.
• Monitor and review information from materials, or the work area, and communicate with proper personnel when a problem is assessed or detected.
• Inspect equipment, structures, materials to identify correct operation and/or cause of errors, other problems, or defects and document, communicating with proper personnel when a problem is assessed or detected.
• Develop specific goals and plans to prioritize, organize, and accomplish your work.

• Per standard operating procedures submit completed parts to Quality Assurance for inspection and approval.
• Correctly evaluate quality of materials and/or products and record operational and/or production data as required per standard operating procedures.
• While following all safety procedures and processes, properly maintain production equipment.
• Job requires being careful about detail and thorough in completing work tasks.
• Job requires being pleasant with others on the job, displaying a cooperative attitude.
• Job requires positive teamwork by taking personal responsibility and maintaining composure, keeping emotions in check, and avoiding aggressive behavior, even if in a difficult situation.
• Job requires being reliable, responsible, dependable, and fulfilling obligations.
• Job requires a willingness to take on responsibilities and challenges.
• Job requires establishing and maintaining personally challenging achievement goals and exerting effort toward mastering tasks.
• Job requires accepting criticism and dealing with it calmly and effectively.
• Job requires persistence in the face of obstacles, to accomplish needed tasks and/or duties.
• Job requires being open to change (positive or negative) and to variety in the workplace.
• Job requires being honest and ethical.
• Job requires analyzing information and using logic to address work-related issues and problems.
• Job requires being understanding of others' needs and feelings and helpful on the job.
ADDITIONAL RESPONSIBILITIES
• Correctly clean, operate, and maintain hydraulic press, molds, oven & controller, vacuum systems, and any other additional equipment.
• Give full attention to what other people are saying, take time to understand the points being made, ask questions as appropriate, and do not interrupt at inappropriate times.
• Monitor your performance, other individuals, and/or organizations to make improvements or take corrective action. Adjust your actions in relation to others' actions as needed.
• Watch gauges, dials, or other indicators to make sure a machine is working properly.
● Understanding written sentences and paragraphs in work-related documents.
● Be aware of others' reactions and understand why they react as they do.
● Manage your own time and be aware of the time of others.
● Assist with other departmental operations and/or projects as assigned and/or requested.
• Other duties and other areas assigned by your production supervisor when needed by the company.

 

KNOWLEDGE, SKILLS, AND ABILITIES
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.
POSITION REQUIREMENTS
Knowledge:
● Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
● Knowledge of machines and tools, including who to communicate with regarding their designs, uses, repair, and maintenance.
● Knowledge of relevant equipment, policies, procedures, and strategies to promote effective operations for the safety of people, property, and Sioux Manufacturing

● Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models.
● Knowledge of arithmetic, algebra, geometry, and their applications.
● Knowledge to identify underlying principles, reasons, or facts of information by breaking down information or data into separate parts to improve your skills and/or department processes.
● Knowledge to develop constructive and working relationships with others to cooperatively work together and achieve quality products timely and support positive interactions over time.
Skills:
● Be aware of others' reactions and understand why they react as they do.
● Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems.
● Be able to effectively communicate information to co-workers, department supervisors, department management, and ensure accurate transition of that information.
Abilities:
● Ability to manage your own time and be aware of the time of others.
● Ability to use hands and arms in handling, installing, positioning, and moving materials, and manipulating objects as required by all standard operating procedures and/or other documented instructions.
● Ability to control mechanisms or direct physical activity to operate machines or processes.
● Ability to identify information by categorizing, estimating, recognizing differences or similarities, and detecting changes in products and/or processes.
● Ability to identify the needs of others and coach, mentor, or otherwise help coworkers to improve their knowledge, skills, and abilities.
● Ability to use relevant information and individual judgment to determine whether current processes comply with standard operating procedures, quality standards and/or documented client provided requirements.
● Ability to compile, categorize, calculate, tabulate, audit, and/or verify information and data.
Technology: (software that the position may use)
● Desktop/Office suite software, HR/timekeeping software, machine specific software, and/or work-related phone apps.
COMPUTER SKILLS
• Basic computer knowledge required.
EDUCATION and/or EXPERIENCE
Required: High school diploma or GED required.
Preferred: 3-6 months' experience in a manufacturing environment preferred.

  • Senior TPF

    1 month ago

    Fort Worth, United States Petadata Full time

    Job DescriptionJob DescriptionPosition: Senior TPF / Assembler DeveloperLocation: Fort Worth, TXExperience: 7+ YearsWork type: C2C PETADATA is currently looking to hire for the position of Senior TPF / Assembler Developer for one of their clients. Roles & Responsibilities: Responsible for participating in the development, maintenance, enhancement, and...

  • Senior TPF

    3 weeks ago

    Fort Worth, United States Petadata Full time

    Job DescriptionJob DescriptionPosition: Senior TPF / Assembler DeveloperLocation: Fort Worth, TXExperience: 7+ YearsWork type: C2C PETADATA is currently looking to hire for the position of Senior TPF / Assembler Developer for one of their clients. Roles & Responsibilities: Responsible for participating in the development, maintenance, enhancement, and...

  • Senior TPF

    2 weeks ago

    Fort Worth, United States Petadata Full time

    Job DescriptionJob DescriptionPosition: Senior TPF / Assembler DeveloperLocation: Fort Worth, TXExperience: 7+ YearsWork type: C2C PETADATA is currently looking to hire for the position of Senior TPF / Assembler Developer for one of their clients. Roles & Responsibilities: Responsible for participating in the development, maintenance, enhancement, and...

  • Senior TPF

    4 weeks ago

    Fort Worth, United States PETADATA Full time

    Position: Senior TPF / Assembler Developer Location: Fort Worth, TX Experience: 7+ Years Work type: C2C PETADATA is currently looking to hire for the position of Senior TPF / Assembler Developer for one of their clients. Roles & Responsibilities: Responsible for participating in the development, maintenance, enhancement, and support of...

  • Assembler

    3 weeks ago

    Fort Worth, United States Belcan Full time

    Assembler Job Number: 349234 Category: Assembly Description: Job Title: Assembler Pay Rate: $17.50 /hr Location: Ft. Worth, TX Area Code: 817, 682 ZIP Code: 76114 Start Date: Right Away Shift: 1st shift; 7am-3:30pm Keywords: #Assembler #ProductionAssemblyJobs #ManufacturingJobs Benefits: Medical / Health Benefits with multiple plan options,...

  • Assembler

    2 weeks ago

    Fort Worth, United States Belcan Full time

    Assembler Job Number: 349234 Category: Assembly Description: Job Title: Assembler Pay Rate: $17.50 /hr Location: Ft. Worth, TX Area Code: 817, 682 ZIP Code: 76114 Start Date: Right Away Shift: 1st shift; 7am-3:30pm Keywords: #Assembler #ProductionAssemblyJobs #ManufacturingJobs Benefits: Medical / Health Benefits with multiple plan options,...

  • Mechanical Assembler

    3 weeks ago

    Fort Lauderdale, United States Dayton Granger, Inc. Full time

    **Immediately Hiring**: Mechanical Assembler **Company**:Dayton-Granger, Inc. **Industry**:Aviation and Aerospace Component Manufacturing **Location**:Fort Lauderdale, FL **Shift**: 1st Shift Monday - Friday **Direct Hire **Responsibilities**: - Performs a variety of mechanical assembly duties such as riveting and drilling to bond composite assemblies...

  • Electronic Assembler

    4 weeks ago

    Fort Lauderdale, United States Dayton-Granger Full time

    *Now Hiring: Electronic Assembler / Solderer * Hours: Day Shift - Monday to Friday schedule, Full Time Location: Fort Lauderdale, FL 33315 *Who We Are: *Just steps from the Fort Lauderdale International Airport Dayton Granger, Inc. designs, manufactures and supplies cutting edge avionicsproducts in support of programs for commercial, general aviation and...

  • Assembler

    7 days ago

    Fort Worth, United States Indeed Flex Full time

    Note: This job is for Indeed Flex, but will take place at a client's worksite. Job Title: Assembler Hourly Rate: $15.00/hr Shift Times: Monday-Friday (8:00 a.m. - 4:30 p.m.) Location: Fort Worth, TX Indeed Flex is hiring Assemblers for their electronics client in Fort Worth, TX. Benefits: Get paid the same or next day Comprehensive health, dental, and...

  • Assembly Operator

    3 weeks ago

    Fort Payne, United States Staffmark Full time

    You don't have to leave to go far. Staffmark has an entry-level, temp-to-hire opportunity in Fort Payne, AL. We have teamed up with an automotive manufacturing company to hire an Assembly Operator. No experience is necessary as we will train the best, most reliable fit for this position. Shift Options | 1st, 2nd, or 3rd shift availability Pay | $15 per...

  • Assembly Operator

    2 weeks ago

    Fort Payne, United States Staffmark Full time

    You don't have to leave to go far. Staffmark has an entry-level, temp-to-hire opportunity in Fort Payne, AL. We have teamed up with an automotive manufacturing company to hire an Assembly Operator. No experience is necessary as we will train the best, most reliable fit for this position. Shift Options | 1st, 2nd, or 3rd shift availability Pay | $15 per...

  • Mechanical Assembler

    2 weeks ago

    Fort Collins, United States Aerotek Full time

    Summary: As an Assembler, you will be using your previously developed skills and expertise to build aircraft parts according to drawings and written instructions. The role entails performing low to moderately complex assembly and tests on products, including but not limited to small products, light subassemblies, and/or complete units of a smaller...

  • Mechanical Assembler

    2 weeks ago

    Fort Collins, United States Aerotek Full time

    Summary: As an Assembler, you will be using your previously developed skills and expertise to build aircraft parts according to drawings and written instructions. The role entails performing low to moderately complex assembly and tests on products, including but not limited to small products, light subassemblies, and/or complete units of a smaller...

  • Mechanical Assembler

    3 weeks ago

    Fort Lauderdale, United States Dayton-Granger Full time

    Immediately Hiring: Mechanical Assembler Company: Dayton-Granger, Inc. Industry: Aviation and Aerospace Component Manufacturing Location: Fort Lauderdale, FL Shift: 1st Shift Monday - Friday Direct Hire Responsibilities: Performs a variety of mechanical assembly duties such as riveting and drilling to bond composite assemblies as well as ensure the...

  • Power Conveyor Assembly

    1 week ago

    Fort Smith, United States Hytrol Full time

    Welcome to Hytrol Careers ESSENTIAL DUTIES AND RESPONSIBILITIES 1. Assembling conveyor and conveyor assemblies. 2. Frequent and variable lifting, pulling, pushing, and carrying of up to 50 pounds. 3. Perform any other related duties as required or assigned. EDUCATION AND EXPERIENCE High School Diploma or General Education Development (GED) equivalency...

  • Mechanical Assembler

    2 weeks ago

    Fort Lauderdale, United States Dayton-Granger Full time

    Immediately Hiring: Mechanical Assembler Company: Dayton-Granger, Inc. Industry: Aviation and Aerospace Component Manufacturing Location: Fort Lauderdale, FL Shift: 1st Shift Monday – Friday Direct Hire ** ** Responsibilities: Performs a variety of mechanical assembly duties such as riveting and drilling to bond composite assemblies as well as ensure the...

  • Mechanical Assembler

    4 days ago

    Fort Lauderdale, United States Dayton-Granger Full time

    Immediately Hiring: Mechanical Assembler Company: Dayton-Granger, Inc. Industry: Aviation and Aerospace Component Manufacturing Location: Fort Lauderdale, FL Shift: 1st Shift Monday – Friday Direct Hire ** ** Responsibilities: Performs a variety of mechanical assembly duties such as riveting and drilling to bond composite assemblies as well as ensure the...

  • Mechanical Assembly Technician

    2 months ago

    Fort Collins, United States CMG - Corporate Office Full time

    Job DescriptionJob DescriptionPosition Summary:Support the integration of large, custom robotic welding and cutting systems through runoff and equipment teardown including mechanical assembly, electrical assembly, and electrical troubleshooting.Primary Responsibilities:Assemble and test robotic welding systems and cutting systems on time and within...

  • Electronic Assembler

    7 days ago

    Fort Walton Beach, United States Aerotek Full time

    SEEKING ASSEMBLER IN THE FORT WALTON BEACH AREA! $17-23 AN HOUR DEPENDING ON EXPERIENCE! Job Duties: Position and align parts in specified relationship to each other and uses hand or power tools to secure parts Mount assembled components on chassis, panels, or circuit boards Route wiring and cabling through assembly to terminals according to color...

  • Mechanical Assembler

    3 days ago

    Fort Collins, United States Aerotek Full time

    Summary: As an Assembler, you will be using your previously developed skills and expertise to build aircraft parts according to drawings and written instructions. The role entails performing low to moderately complex assembly and tests on products, including but not limited to small products, light subassemblies, and/or complete units of a smaller size....