Turret Punch Press Operator

6 days ago

Fort Wayne, United States QuikCut LLC Full time
Job DescriptionJob DescriptionDescription:

To work alongside the laser team at QuikCut; cutting on a wide variety of products. Turret operators must be able to run the machine as well as be prepared to sort, clean and pull parts from the skeleton. All operators must meet high expectations and standards set by QuikCut, and providing quality work while completing forming projects in an efficient amount of time.

Requirements:

Major Responsibilities:

· Plan all setups, call of proper programs for each project and check setup sheet with turret station board to determine tool placement needs to perform operations such as punching, embossing, notching, forming and shearing.

· Load tools in tool holders and index as indicated by the tool sheet.

· Set material holders in proper position on table in accordance to the program.

· Run a sample part and check dimensions and operations performed against the blueprint. Adjust tool positions or replace tools as necessary.

· Operate machine, load and unload parts following machine cycle, check work for required operations and specifications and place finished parts on skid.

  • Monitor machine for proper operation, add oil to reservoir and replace tools as necessary.
  • Prepare job tickets, scrap and daily production records.
  • Notify Group Leader of unusual machine or material problems.
  • Stack and move material as required.

· Be able to efficiently read blueprints and drawings from designers and engineers.

a. Be able to read and take measurements to plan layout and procedures.

· Perform typical laser cutting operations

· Be able to select the proper cutting program with the project as well as proper fixtures

· Set up the laser machine appropriate for cutting operations

· Establish a proper stop location, adjust laser beam focal points when necessary

· Perform all dimensional inspections

· Detect and report all defective material or questionable conditions to the supervisor and or quality

· Inspects products, evaluating finished pieces for compliance with quality standards and specification.

· Measure the final product to ensure uniformity according to the blueprint.

· Restock materials needing to be run through the laser, or stack completed materials in the appropriate area.

· Perform routine maintenance on the machine and log it.

· Maintains a clean and organized work area (5S).

· Physical Requirements: prolonged periods of standing, pushing, pulling, lifting and carrying materials.

a. Must be able to lift 25 – 90 pounds at a time.

Additional Responsibilities:

· Use an air grinder or similar tool to clean parts

· Other duties as assigned

Supervised by: Fab Shop Success Manager

  • Amada Turret Punch Operator

    7 days ago

    Fort Worth, United States Will's Pro Custom MFG Full time

    Job DescriptionJob Description WPC has an immediate opening for a highly motivated Turret Punch Operator with a desire to work in a fast paced, quality centered environment. This role is essential to ensuring the resulting end product is made to exact specifications as designated by the customer, meets all quality tests and is delivered on time. As such, a...

  • Metal Stamp Press Operator

    2 weeks ago

    Fort Wayne, United States Riverside Mfg LLC Full time

    Job DescriptionJob DescriptionEssential Job Functions:Set up, operate or tend machines to shape metal material to close tolerancesStart machine, monitor operations, and record operational dataVisually measure and inspect completed workpieces to verify matching part numbersTest and adjust machine speeds or actions, according to product specifications.Report...

  • Litho Press Operator

    5 days ago

    Fort Worth, United States Beneficial Talent Source Full time

    Job DescriptionJob DescriptionLitho Press OperatorRequired: 1-5 years of Litho or Offset printing press experience*Direct hire - full time with benefits*Well established, fast growing company with dependable work*Clean, state-of-the-art facility with well-kept machinesBenefits:Comprehensive and competitive benefits - medical, dental, vision, company paid...

  • SR. Machinist Engineer III

    7 days ago

    Fort Meade, United States LG-TEK Full time

    Overview: The Machinist shall manufacture mechanical prototypes and engineering models from sketches and conversations with Engineers and Technicians. The machinist shall work in various materials to include metal, wood, plastics, nylon, composites, and others. The Machinist shall work with little or no direction from engineers. Responsibilities: Works...

  • Litho Press Operator

    7 days ago

    Fort Worth, United States Beneficial Talent Source Full time

    Job DescriptionJob DescriptionLitho OperatorRequired: 1-5 years of Litho or Offset printing press experience*Direct hire - full time with benefits*Well established, fast growing company with dependable work*Clean, state-of-the-art facility with well-kept machinesBenefits:Comprehensive and competitive benefits - medical, dental, vision, company paid life...

  • Fabricator

    6 days ago

    Fort Lauderdale, United States KCM Machine Shop of Broward County Full time

    Job DescriptionJob DescriptionFabricator/Welder - Fabricates, assembles, installs and repairs metal products and equipment.Determines project requirements, including scope, assembly sequences, and required methods and materials, according to blueprints, drawings and written or verbal instructions.Lays out, measures and marks dimensions and reference lines on...

  • Fabricator

    2 weeks ago

    Fort Lauderdale, United States KCM Machine Shop of Broward County Full time

    Job DescriptionJob DescriptionFabricator/Welder - Fabricates, assembles, installs and repairs metal products and equipment.Determines project requirements, including scope, assembly sequences, and required methods and materials, according to blueprints, drawings and written or verbal instructions.Lays out, measures and marks dimensions and reference lines on...

  • CNC Machinist

    7 days ago

    Fort Wayne, United States Press-Seal Corporation Full time

    PURPOSE OF POSITION The CNC machinist operates computer numerical control machines to fabricate parts. The CNC machinist loads parts in the machine, cycles machine, and detects malfunction machine operations such as worn or damaged cutting tools. The position runs production lots, communicated with co-workers regarding production runs, and maintains a safe,...

  • CNC Machinist

    6 days ago

    Fort Wayne, United States Press-Seal Corporation Full time

    Job DescriptionJob DescriptionDescription:PURPOSE OF POSITIONThe CNC machinist operates computer numerical control machines to fabricate parts. The CNC machinist loads parts in the machine, cycles machine, and detects malfunction machine operations such as worn or damaged cutting tools. The position runs production lots, communicated with co-workers...

  • CNC Machinist

    2 weeks ago

    Fort Wayne, United States Press-Seal Corporation Full time

    Job DescriptionJob DescriptionDescription:PURPOSE OF POSITIONThe CNC machinist operates computer numerical control machines to fabricate parts. The CNC machinist loads parts in the machine, cycles machine, and detects malfunction machine operations such as worn or damaged cutting tools. The position runs production lots, communicated with co-workers...

  • Production Associate

    7 days ago

    Fort Wayne, United States Press-Seal Corporation Full time

    Job DescriptionJob DescriptionDescription:This posting is for 3rd shift, 10pm-6am. ESSENTIAL DUTIES AND RESPONSIBILITIESMachine operation and assembly of rubber and plastic products.Maintain a continuous flow of gaskets at the required cycle time.Follow all work instructions and perform all quality checks.Maintain and clean and organized work...

  • Production Associate

    2 weeks ago

    Fort Wayne, United States Press-Seal Corporation Full time

    Job DescriptionJob DescriptionDescription:This job posting is for 1st shift, 6am-2pm.ESSENTIAL DUTIES AND RESPONSIBILITIESMachine operation and assembly of rubber and plastic products.Maintain a continuous flow of gaskets at the required cycle time.Follow all work instructions and perform all quality checks.Maintain and clean and organized work...

  • Production Associate

    2 weeks ago

    Fort Wayne, United States Press-Seal Corporation Full time

    Job DescriptionJob DescriptionDescription:This posting is for 2nd shift, 2pm-10pm. ESSENTIAL DUTIES AND RESPONSIBILITIESMachine operation and assembly of rubber and plastic products.Maintain a continuous flow of gaskets at the required cycle time.Follow all work instructions and perform all quality checks.Maintain and clean and organized work...

  • Production Associate

    6 days ago

    Fort Wayne, United States Hope Advising Full time

    Job DescriptionJob Description18 Threads is much more than shirts and hats. It's a way of making the world smile. At 18 Threads, we want to illuminate the hearts and minds of our customers through a creative and customized process.We are seeking an individual to join our dynamic production team! The production team produces many items through Heat Press,...

  • Concert Marketing Manager

    6 days ago

    Fort Wayne, United States The Clyde Theater Full time

    FROM HISTORIC MOVIE HOUSE TO HYPER-MODERN MUSIC HALL, THE CLYDE IS FORT WAYNE'S GEM PROVIDING GUESTS AN OUTSTANDING EXPERIENCE EVERY TIME THEY WALK THROUGH ITS DOORS. The Clyde Theatre and Club Room at the Clyde, two of Northeast Indianas premier music and entertainment destinations, consistently welcome incredible live national and regional talent to the...

  • Concert Marketing Manager

    3 days ago

    Fort Wayne, United States The Clyde Theater Full time

    FROM HISTORIC MOVIE HOUSE TO HYPER-MODERN MUSIC HALL, THE CLYDE IS FORT WAYNE'S GEM PROVIDING GUESTS AN OUTSTANDING EXPERIENCE EVERY TIME THEY WALK THROUGH ITS DOORS. The Clyde Theatre and Club Room at the Clyde, two of Northeast Indianas premier music and entertainment destinations, consistently welcome incredible live national and regional talent to the...

  • Concert Marketing Manager

    2 weeks ago

    Fort Wayne, United States The Clyde Theater Full time

    FROM HISTORIC MOVIE HOUSE TO HYPER-MODERN MUSIC HALL, THE CLYDE IS FORT WAYNE'S GEM PROVIDING GUESTS AN OUTSTANDING EXPERIENCE EVERY TIME THEY WALK THROUGH ITS DOORS.The Clyde Theatre and Club Room at the Clyde, two of Northeast Indiana’s premier music and entertainment destinations, consistently welcome incredible live national and regional talent to the...

  • Concert Marketing Manager

    Found in: Appcast Linkedin GBL C2 - 2 weeks ago

    Fort Wayne, United States The Clyde Theater Full time

    FROM HISTORIC MOVIE HOUSE TO HYPER-MODERN MUSIC HALL, THE CLYDE IS FORT WAYNE'S GEM PROVIDING GUESTS AN OUTSTANDING EXPERIENCE EVERY TIME THEY WALK THROUGH ITS DOORS.The Clyde Theatre and Club Room at the Clyde, two of Northeast Indiana’s premier music and entertainment destinations, consistently welcome incredible live national and regional talent to the...

  • OP - Construction Project Superintendent

    6 days ago

    Fort Wayne, United States MKS Full time

    Job DescriptionJob DescriptionSalary: Construction Project SuperintendentJob ResponsibilitiesOVERVIEW & QUALIFICATIONS Michael Kinder and Sons, Inc., a fourth-generation family-owned Design-Build Construction Firm is seeking a Construction Project Superintendent. The Project Superintendent is responsible to effectively lead, manage, direct, and coordinate...

  • OP - Construction Project Superintendent

    2 weeks ago

    Fort Wayne, United States MKS Full time

    Job DescriptionJob DescriptionSalary: Construction Project SuperintendentJob ResponsibilitiesOVERVIEW & QUALIFICATIONS Michael Kinder and Sons, Inc., a fourth-generation family-owned Design-Build Construction Firm is seeking a Construction Project Superintendent. The Project Superintendent is responsible to effectively lead, manage, direct, and coordinate...