Machine Shop/CNC Operator

1 month ago

Monroe, United States ConMet Monroe Facility Full time
Job DescriptionJob Description

Opportunity: CMICN001711

Essential Duties & Responsibilities

  • Lifts products from pallets and loads them onto fixtures and/or conveyors.
  • Operates robotic and/or manually loaded CNC station controls using push-buttons, switches, and a computer terminal*.
  • Performs and records results of First Piece Check.
  • Visually inspects parts for defects as required.
  • Verifies part dimensions using plug and thread gauges.
  • Determines offsets and adjusts on-screen values to compensate for product variations within tolerance.
  • Determines Corrective Actions, reporting all problems to a supervisor.
  • De-burs products.
  • Applies identification numbers to product with a hammer stamp.
  • Changes inserts and other tooling as needed using various hand tools.
  • Accurately records production at end of shift.
  • Maintains a clean work area.
  • Other duties as assigned.

*CNC Operators are cross-trained to operate both manual and robotic machining stations.

Qualifications

Education & Experience

  • High school diploma or general education degree (GED); or six to twelve months related experience or training; or equivalent combination of education and experience.

  • Knowledge, Skills, & Abilities

  • Attention to detail and quality in a fast-paced industrial environment.

  • Ability to perform minor troubleshooting and determine causes and sources of error.

  • Basic computer skills.

  • Basic math skills (decimal system, min/max values).

  • Ability to follow written work instructions and control plans.

  • Ability to follow verbal directions from supervisor, management, and all policies and procedures implemented by ConMet.

  • Forklift license beneficial but not required.

  • SPC knowledge is beneficial but not required.

Environmental & Physical Demands

  • The employee must regularly lift and/or move up to 40 pounds and occasionally lift and/or move up to 60 pounds.
  • Occupational noise exposure is high during performance of required duties. Adequate hearing protection is provided and required at all times.
  • Occupational exposure to fumes and dust is regularly encountered. Personal Protective Equipment including safety glasses and steel-toed, industrial footwear is required at all times.
  • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
  • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

ConMet provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression or any other characteristics protected by federal, state, or local laws (“Protected Characteristics”). Ensuring fair wages is an important Company value. Accordingly, the Company will not pay wages to any employee at a rate less than the Company pays to other employees for work that is substantially equivalent and requires comparable skills unless a bona fide factor justifies a pay differential. The Company prohibits pay disparity based on Protected Characteristics or prior salary history. The Company prohibits retaliation against employees for discussing compensation.

You should be proficient in:

  • Machine Setups for Production Runs
  • Blueprint Reading
  • Mechanical Troubleshooting Skills
  • Deburring Experience
  • Packaging Experience
  • Metal Casting Experience
  • Excellent Communication Skills
  • Shop Math Skills

Machines & technologies you'll use:

  • CNC Mill (3-4 axis VMC)
  • CNC Lathe (2-4 axis)

Salary info:

$18 - $20 / hr

  • Machine Shop/CNC Operator

    4 weeks ago

    Monroe, United States Path Engineering Full time

    Role As a CNC Operator (also known as a Machinist, CNC Technician), you'll be responsible for loading products onto fixtures and conveyors, operating both manual and robotic CNC stations, performing quality checks, adjusting machine settings for product variations, and maintaining a clean work area. You'll also change tooling as needed, record production...

  • Machine Shop/CNC Operator

    3 weeks ago

    Monroe, United States ConMet Monroe Facility Full time

    Opportunity: CMICN001711 Essential Duties & Responsibilities Lifts products from pallets and loads them onto fixtures and/or conveyors. Operates robotic and/or manually loaded CNC station controls using push-buttons, switches, and a computer terminal*. Performs and records results of First Piece Check. Visually inspects parts for defects as required....

  • Machine Shop/CNC Operator

    2 months ago

    Monroe, United States ConMet Monroe Facility Full time

    Job DescriptionJob DescriptionOpportunity: CMICN001711Essential Duties & ResponsibilitiesLifts products from pallets and loads them onto fixtures and/or conveyors.Operates robotic and/or manually loaded CNC station controls using push-buttons, switches, and a computer terminal*.Performs and records results of First Piece Check.Visually inspects parts for...

  • CNC Machine Operator

    4 weeks ago

    Monroe, United States Lexicon, Inc. Full time

    Are you ready to start "Building America"? At Lexicon, we're seeking a skilled CNC Machine Operator to join our team and be a part of our continued success. Offering competitive pay ranging between $15hr - $25/hr, this role presents an exciting opportunity for growth and development. If you're passionate about being a part of a team that values integrity,...

  • CNC Machine Operator

    2 months ago

    Monroe, United States Lexicon, Inc. Full time

    Are you ready to start "Building America"? At Lexicon, we're seeking a skilled CNC Machine Operator to join our team and be a part of our continued success. Offering competitive pay ranging between $15hr - $25/hr , this role presents an exciting opportunity for growth and development. If you're passionate about being a part of a team that values integrity,...

  • CNC Lathe Operator

    1 week ago

    Monroe, United States Aerotek Full time

    **CNC Machinist****Overview:**· $25 to $35 an hour· Location: Monroe, WA· Weekly Pay**Job Description:**Machine shop in Monroe looking to hire CNC Mill and Lathe Machinists! We are looking for machinists of all levels; whether you are a seasoned machinist or an entry level candidate out of trade school, we believe this will be a great opportunity to grow...

  • Machine Operator

    2 weeks ago

    Monroe, United States Consolidated Metco Full time

    Job DescriptionJob DescriptionEssential Duties & ResponsibilitiesLifts products from pallets and loads them onto fixtures and/or conveyors.Operates robotic and/or manually loaded machine station controls using push-buttons, switches, and a computer terminal*.Performs and records results of First Piece Check.Visually inspects parts for defects as...

  • CNC Operator Swiss screw machines

    2 weeks ago

    Monroe, United States Biomerics Full time

    Job Type Full-time Description Job Title: CNC Machine Operator Company: Biomerics Location: Monroe, CT Position Type: Full-time Employee Hourly Rate: $19.00 - $25.00, depending on experience. Swiss Machinist (Tsugami & Citizen- our models with laser capabilities) 1st & 2nd shift available. First shift hours- 6:30AM-2:30PM Second shift hours-2:30PM-10:30PM...

  • CNC Operator

    2 weeks ago

    Monroe, United States Biomerics Full time

    Job Type Full-timeDescriptionJob Title: CNC Machine OperatorCompany: Biomerics Location: Monroe, CT Position Type: Full-time EmployeeHourly Rate: $19.00 - $25.00, depending on experience.Swiss Machinist (Tsugami & Citizen- our models with laser capabilities) 1st & 2nd shift available. First shift hours- 6:30AM-2:30PMSecond shift...

  • CNC Operator

    2 weeks ago

    Monroe, United States Biomerics Full time

    Job Type Full-time Description Job Title: CNC Machine Operator Company: Biomerics Location: Monroe, CT Position Type: Full-time Employee Hourly Rate: $19.00 - $25.00, depending on experience. Swiss Machinist (Tsugami & Citizen- our models with laser capabilities) 1st & 2nd shift available. First shift hours- 6:30AM-2:30PMSecond shift...

  • Machine Operator

    2 months ago

    Monroe, United States ConMet Monroe Facility Full time

    Job DescriptionJob DescriptionEssential Duties & ResponsibilitiesLifts products from pallets and loads them onto fixtures and/or conveyors.Operates robotic and/or manually loaded CNC station controls using push-buttons, switches, and a computer terminal*.Performs and records results of First Piece Check.Visually inspects parts for defects as...

  • Tooling & Setup Technician Lead - Machine Shop 1st Shift

    2 weeks ago

    Monroe, United States Consolidated Metco Full time

    Job DescriptionJob DescriptionJob SummaryOversees major equipment changeovers in a manual and robotic CNC machining area. Regularly inspects operator stations to ensure that any required gauging, maintenance, or other corrective actions are carried out according to ConMet policies.Supports tooling & setup optimization and training documentationMay be...

  • Cnc Machinist

    4 weeks ago

    Monroe, United States DYNA-TECH MANUFACTURING, INC Full time

    Looking for CNC setup machinist for job shop located in Indian Trail NC. Must know how to set up and operate Haas and Fanuc CNC machines, read blue prints and maintain part specifications per print. This is a full time position. M-T 7-4:30 and F 7-3;30. We offer great benefits that include Aetna healthcare insurance, dental, vision, short term disability...

  • Cnc Machinist

    1 month ago

    Monroe, United States Dyna-Tech Manufacturing Inc Full time

    Looking for CNC setup machinist for job shop located in Indian Trail NC. Must know how to set up and operate Haas and Fanuc CNC machines, read blue prints and maintain part specifications per print. This is a full time position. M-T 7-4:30 and F 7-3;30. We offer great benefits that include Aetna healthcare insurance, dental, vision, short term disability...

  • CNC Operator

    2 weeks ago

    Monroe, United States Aerotek Full time

    **Job Title: CNC Operator (Building 1)** **Job Description** Join our team in the production of automotive and transportation related components. In this role, you will be in charge of operating CNC Lathes and Mills in a production environment. Your main responsibilities will include running and monitoring a line of 3-5 CNC machines and making offsets as...

  • CNC Operator 3rd Shift Granite Company

    1 month ago

    Monroe, United States Pro-Tops Full time

    Job DescriptionJob DescriptionBenefits:401(k) matchingDental insuranceEmployee discountsFree uniformsHealth insuranceOpportunity for advancementPaid time offTraining & developmentVision insuranceWe seek a skilled CNC Operator to join our team on the 3rd shift at our granite company. As a CNC Operator, you will be responsible for operating computer numerical...

  • CNC Operator 3rd Shift Granite Company

    1 month ago

    Monroe, United States Pro-Tops Full time

    Job DescriptionJob DescriptionBenefits:401(k) matchingDental insuranceEmployee discountsFree uniformsHealth insuranceOpportunity for advancementPaid time offTraining & developmentVision insuranceWe seek a skilled CNC Operator to join our team on the 3rd shift at our granite company. As a CNC Operator, you will be responsible for operating computer numerical...

  • CNC Operator

    4 weeks ago

    Monroe, United States Hitachi, Ltd. Full time

    Location:Monroe, Georgia, United StatesJob ID: R0046080Date Posted:2024-04-17Company Name:HITACHI ASTEMO AMERICAS, INC.Profession (Job Category):Engineering & ScienceJob Schedule: Full timeRemote:NoJob Description:Hitachi Astemo has been synonymous with safety, quality, growth, and continuous improvement. Adhering to these core values has enabled us to...

  • CNC Operator

    4 weeks ago

    Monroe, United States Hitachi, Ltd. Full time

    Location:Monroe, Georgia, United StatesJob ID: R0046077Date Posted:2024-04-17Company Name:HITACHI ASTEMO AMERICAS, INC.Profession (Job Category):Engineering & ScienceJob Schedule: Full timeRemote:NoJob Description:Hitachi Astemo has been synonymous with safety, quality, growth, and continuous improvement. Adhering to these core values has enabled us to...

  • CNC Operator

    4 weeks ago

    Monroe, United States Hitachi Full time

    Location: Monroe, Georgia, United States Job ID: R0046077 Date Posted: 2024-04-17 Company Name: HITACHI ASTEMO AMERICAS, INC. Profession (Job Category): Engineering & Science Job Schedule: Full time Remote: No Job Description: Hitachi Astemo has been synonymous with safety, quality, growth, and continuous improvement. Adhering to these core values has...