Machine Operator
3 weeks ago
ESSENTIAL DUTIES & RESPONSIBILITIES
Brake Press
• Clean, deburr, grind and torch machine parts as needed.
• Read production schedule and work orders to determine items to be bent, formed or straightened.
• Set-up and operate heavy duty brake press to bend, form and straighten metal plates and metal extrusions according to specifications.
Roll Form
• Manage a roll forming line and machine, as well as any secondary equipment needed for the job.
• Roll forming is a process where a long strip of metal is manipulated into the desired shape.
• Perform setup work to ensure all materials are where they should be, check the label of each material to be sure it's correct, help stack products after you process them, and otherwise ensure the roll forming machine continues to operate as intended.
• Clean the machine, add or switch lubricants, check the coil on materials about to go through.
KNOWLEDGE, SKILLS & ABILITIES
• Performs work under direct supervision.
• Handles basic issues and problems and refers more complex issues to higher-level staff.
• Possesses beginning to working knowledge of subject matter.
• High school diploma or general education degree (GED) preferred.
• Minimum of 6 to 12 months related experience and/or training in a manufacturing environment.
• Previous experience using similar machines preferred.
• Blueprint reading skills required.
• Ability to read and interpret documents such as safety rules, procedures, etc.
JOB COMPETENCIES:
• Attentiveness.
• Ability to follow directions.
• Ability to lift/move heavy objects.
• Manual dexterity.
• Physical Stamina.
• Planning skills.
PHYSICAL DEMANDS:
• Continuous standing and walking.
• Intermittent bending/twisting, pushing/pulling, climbing, lifting/lowering.
• Intermittent use of hand/wrist.
• Seldom crouching, sitting, or working at heights.
• Must carry 1 to 35 pounds intermittently. 36 pounds or more lifting device available.
• Intermittent climbing; reaching above; and lifting 20-35 pounds.
• Seldom crouching; lifting over 35 pounds without assistance; repetitive motion of hand/wrist; working at heights; or laying in a prone position.
WORK ENVIRONMENT:
• Exposure to typical manufacturing areas is required and will require the use of personal protective equipment such as safety shoes, safety glasses and mandatory hearing protection.
• Manual dexterity and mobility to move within plant/area as assigned.
• Exposure to climate conditions must be able to withstand periods of heat and cold.
$18 - $20/hr
#INDHOT
-
Machine Operator
4 days ago
Akron, United States PPS-HPS Full timeJob DescriptionJob DescriptionMACHINE OPERATOR! $18.00-$20.00 TO START 1ST SHIFTAKRON!The Cut-To-Length Machine Operator sets up, operates, maintains, and monitors the quality processing of stainless steel and aluminum from rolled coil in accordance with specialized packaging instructions to prepare the material for the final customer. DESCRIPTION:Excellent...
-
Machine Operator
3 weeks ago
Akron, United States Jetpack Shipping Full timeJob DescriptionJob DescriptionJob descriptionJetpack Shipping is a leader in private label fulfillment. It is our mission to provide effortless on-demand private label products while fixating on providing a transparent customer experience. We drive operational excellence into our processes and capabilities while continuously creating growth for our...
-
Wire Draw Machine Operator
4 days ago
Akron, United States PPS-HPS Full timeJob DescriptionJob DescriptionWIRE DRAW MACHINE OPERATORWILL PAY UP TO $25.00 AN HOUR!LOOKING FOR SOMEONE WITH EXPERIENCE IN WIRE DRAW.AKRON.Operates wire drawing machine to shape or emboss wire.Reviews work orders and selects shaping, reducing, or embossing roller dies according to specifications. .Positions roller die in machine that shapes, reduces, or...
-
Machine Operator 2nd Shift
6 days ago
Akron, United States Tru-fit Products Tru-Weld Full timeJob DescriptionJob DescriptionWe are a family owned and operated business in Medina, OH that is seeking a highly organized and efficient machine operator.Qualifications:Mechanical aptitude & willingness to learn--on job training is providedGrow your knowledge & skills through a wide-variety of training & on-the-job experiencesAbility to work an 8-hour shift,...
-
Panel Assembly Machine Operator
2 weeks ago
Akron, United States Merryweather Foam Full timeJob DescriptionJob DescriptionNote: ZipRecruiter sometimes automatically posts inaccurate pay ranges on these job posts. The ZipRecruiter estimated pay range is not an accurate salary range for this position. The actual pay range will be discussed during the interview process.1. Do you have so much mechanical skill that it's falling out of your...
-
CNC Machinists and/or Manual Machinists
5 days ago
Akron, United States Best Mold & Manufacturing, Inc Full timeJob DescriptionJob DescriptionHiring ImmediatelyMachinistsGrowing ISO Certified business seeks experienced machinists for both day and afternoon shifts in the following positions:**Pay based on Experience**CNC Mill/Horizontal Programmer/OperatorCNC Lathe Programmer/OperatorManual MachinistBest Manufacturing specializes in the following areas:General and...
-
Radiology General X-Ray Machine Operator
4 days ago
Akron, United States Akron Children's Hospital Full timePart-Time, 12 Hours/Week Variable Shifts Onsite Summary: Performs radiology examinations within the GXMO scope of practice as defined by the Ohio Department of Health, including general x-ray procedures where a Doctor of Medicine or a Doctor of Osteopathic Medicine is on-site. The Radiology GXMO tech will not independently perform fluoroscopic procedures,...
-
Radiology General X-Ray Machine Operator
6 days ago
Akron, United States Akron Children's Hospital Full timePart-Time, 12 Hours/Week Variable Shifts Onsite Summary: Performs radiology examinations within the GXMO scope of practice as defined by the Ohio Department of Health, including general x-ray procedures where a Doctor of Medicine or a Doctor of Osteopathic Medicine is on-site. The Radiology GXMO tech will not independently perform fluoroscopic procedures,...
-
Radiology General X-Ray Machine Operator
3 days ago
AKRON, United States Akron Children's Hospital Full timePart-Time, 12 Hours/WeekVariable ShiftsOnsiteSummary:Performs radiology examinations within the GXMO scope of practice as defined by the Ohio Department of Health, including general x-ray procedures where a Doctor of Medicine or a Doctor of Osteopathic Medicine is on-site. The Radiology GXMO tech will not independently perform fluoroscopic procedures,...
-
Radiology General X-Ray Machine Operator
5 days ago
AKRON, United States Akron Children's Hospital Full timePart-Time, 12 Hours/WeekVariable ShiftsOnsiteSummary:Performs radiology examinations within the GXMO scope of practice as defined by the Ohio Department of Health, including general x-ray procedures where a Doctor of Medicine or a Doctor of Osteopathic Medicine is on-site. The Radiology GXMO tech will not independently perform fluoroscopic procedures,...
-
Vertical Machining Center Machinist
2 days ago
Akron, United States ITS Full timeVertical Machining Center / Mill Machinist (1st & 2nd Shift) - Akron, Ohio - JOB (phone number removed) Salary Range: $17.00 - $30.00/HR Akron, Ohio area manufacturer is hiring skilled Machinists. REQUIREMENTS High School Graduate (Trade school or experience) CNC vertical machining center / mills experience 1st and 2nd shift openings - Premium shift...
-
Production Operator
5 days ago
Akron, United States NESCO Inc Full timeLocation: Akron, Ohio Shifts Available: 1st Shift and 2nd Shift Pay Rate: $16-$17 per hour Company Benefits: Competitive pay ($16-$17 per hour) Health, dental, and vision insurance Retirement savings plan Paid time off and holidays Opportunities for advancement 1st Shift Press Operator (1 Position) Assembly Operators (2 Positions) Blowmold Operators ...
-
Radiology General X-Ray Machine Operator
4 days ago
Akron, OH, United States Akron Children's Hospital Full timePart-Time, 12 Hours/Week Variable Shifts Onsite Summary: Performs radiology examinations within the GXMO scope of practice as defined by the Ohio Department of Health, including general x-ray procedures where a Doctor of Medicine or a Doctor of Osteopathic Medicine is on-site. The Radiology GXMO tech will not independently perform fluoroscopic...
-
Punch Press Operator
4 days ago
Akron, United States PrideStaff Full timeTitle: Punch Press OperatorShift: 1stPay: $15.00PrideStaff is hiring for a Punch Press Machine operator for a client located in Akron, OHThis is a long term, temp to hire opportunity!JOB QUALIFICATIONS:Must be able to lift up to 30 pounds consistently Qualified candidate should be a self-starter Have a good mechanical aptitudeExperience in metal stamping and...
-
Entry Level CNC Machinist
2 days ago
Akron, United States ITS Full timeEntry Level CNC Machinist / Drill Operator - Akron, OH - JOB (phone number removed) Pay: $19.00-$25.00/HR Permanent Position with Benefits A locally family owned and operated machine shop serving the aerospace and defense industries has had continual growth year after year. We are currently looking to add an experienced drill operator /...
-
Mold Operator
5 days ago
Akron, United States Manpower Full timeOur client, is looking for a mold room operator to join their team. The Mold Room Operator provides various departmental support roles in the Mold Room and reports to the Department Foreman Job Title: Mold room Operator Location: Akron NY Pay Range: $19-23 per hour Days and Hours : Monday through Thursday, 9am-5:30pm and Friday 6am-2:30pm. ((TEMP...
-
Print Production Operator
2 days ago
Akron, United States Manpower Full timeOur client, is looking for a Print Production Operator to join their team. Job Title: Print Production Operator Location: Akron NY Pay Range: $16.75 per hour Days and Hours : Monday through Thursday, 9am-5:30pm and Friday 6am-2:30pm. ((TEMP TO PERM )) What’s the Job? Operates the molding machines for production Grinds rejected parts for...
-
Punch Press Operator
4 days ago
Akron, United States PrideStaff Full timeJob DescriptionJob DescriptionTitle: Punch Press OperatorShift: 1stPay: $15.00PrideStaff is hiring for a Punch Press Machine operator for a client located in Akron, OHThis is a long term, temp to hire opportunity!JOB QUALIFICATIONS:Must be able to lift up to 30 pounds consistentlyQualified candidate should be a self-starterHave a good mechanical...
-
Print Production Operator
1 week ago
Akron, United States Manpower US Full timeJob DescriptionJob DescriptionJob purposeThe Printer will be trained in multiple departments to inform and educate them on the production process. Potential pay increase during the first 90 days if criteria are met.Duties and responsibilities· Attain proficiency in the setup, functionality, and operation of multiple printing machines across...
-
Solar Equipment Operator
4 days ago
Akron, United States The Babcock & Wilcox Company Full time* We are seeking skilled and experienced Solar Equipment Operators to join our team. * Run and maintain extended boom telehandler forklifts (ie 10,000 lb) and/or skid steer loader/forklift track machines. * Support the installation of solar racking and module panels for large utility-scale solar field plant. * Work on the assembly of structural steel...