Chemist III, Quality Control
3 weeks ago
JOB SUMMARY
The Chemist III, under minimal supervision, performs QC laboratory chemical analyses of raw materials, in-process materials, stability and finished products, and testing to support process validation. Has demonstrated competence in conducting all types of physical and chemical analyses (including complex analyses) using all equipment. Detects, conducts, and reports on OOS/OOT/NOE and other investigations. Learns and stays current with regulatory guidance and compendia relevant to laboratories and pharmaceutical manufacturing. Participates in troubleshooting analyses and instrumentation. Trains less senior staff.
All incumbents are responsible for following applicable Division & Company policies and procedures.
KEY ACCOUNTABILITIES
Analysis & Testing
- Conducts laboratory analyses according to approved test methods: finished product testing, stability testing, raw material testing, cleaning verification testing and manufacturing in-process testing. Typical activities may include buffer/solution preparation, standard preparation and operating analytical instruments: HPLC, UV-Vis, FT-IR, GC and dissolution tester, melting point apparatus, viscometer, Karl Fischer titrator, pH meter, analytical balance, etc.
- Uses laboratory software for analyses
- Reviews and approves laboratory test data and documentation for completeness and compliance
- Is alert to and detects abnormalities during performances of tests and reviews. Elevates abnormalities to Supervisor
- Performs lab methods transfer and participate in method validation/verification studies
Lab Equipment
- Provides general laboratory support such as routine instrument cleaning/preventative maintenance/calibration, sample receiving, chemical inventory, document filing and housekeeping
- Cleans lab working surfaces and dispose of any excess chemicals, solutions, solvents, etc. in the special waste containers for each class of waste chemicals
- Troubleshoots instrument/chromatography problems and identifies improvements/CAPAs
Investigations
- Detects, conducts and reports on OOS/OOT/NOE and other investigations
- Elevates questionable sample results, OOS, and aberrant results immediately to Supervisor and recommends a course of action
- Writes, edits and reviews SOPs and laboratory investigations
Training
- Maintains assigned training records current and in-compliance
- Actively assumes/demonstrates responsibility in training others in good documentation practice, practical lab skills, and chemical theories, methodologies and procedures
Compliance
- Performs assigned work in a timely and safe manner conforming to regulatory, company and compendiaI requirements within pharmaceutical manufacturing setting
- Document accurately data generated in notebooks/worksheets/LIMS in compliance with SOPs
- Follows internal processes related to controlled substances
Safety
- Follows EH&S procedures to ensure a safe work environment
- Follows all applicable safety and standards guidelines, such as SOPs, cGMP, DEA regulations good documentation practice and/or MSDS
QUALIFICATIONS
Education & Experience
- Bachelor of Science Degree in chemistry, chemical engineering or related field with 4+ years’ relevant analytical laboratory experience OR
- Master’s Degree in above disciplines with 2+ years’ relevant analytical lab experience
Knowledge
- Has strong knowledge of laboratory software and has expanded knowledge of chromatographic software (e.g. Waters Empower, Agilent ChemStation and Sotax WinSotax), using custom fields, custom calculations and custom reports
- Full proficiency with various laboratory techniques/instruments: HPLC, UV-Vis, FT-IR, GC and dissolution tester, melting point apparatus, viscometer, Karl Fischer titrator, pH meter, analytical balance, etc.
- Thorough knowledge of applicable safety and standards guidelines, such as SOP, cGMP, GLP, DEA regulations and/or MSDS
- Has demonstrated competence in conducting chemical analyses
- Strong knowledge of wet chemistry techniques
- Competency in Microsoft Office Suite
Skills & Abilities
- Ability to critically review and analyze data, interpret information, and draw conclusions from relevant or missing information, reporting to management
- Ability to display and analyze data in a logical manner
- Ability to critically review, analyze data, interpret information, and draw conclusions from relevant or missing information
- Ability to display and analyze data in a logical manner
- Strong verbal and written communication skills as well as good computer skills
- Strong attention to details and accurate record keeping
- Establish and maintain cooperative working relationships with others
- Solid organizational skills
- Ability to coach less senior staff and develop laboratory skills and ability
- Ability to take initiative, set priorities and follow through on assignments
-
Chemist III, Quality Control
2 days ago
Spring Valley, United States Strides Pharma Inc Full timeJob DescriptionJob DescriptionJOB SUMMARYThe Chemist III, under minimal supervision, performs QC laboratory chemical analyses of raw materials, in-process materials, stability and finished products, and testing to support process validation. Has demonstrated competence in conducting all types of physical and chemical analyses (including complex analyses)...
-
Chemist
2 weeks ago
Hunt Valley, United States Pharmaceutics International, Inc. Full timeJob Title:ChemistJob Description:Perform analytical testing of raw materials, in-process materials and finished products. Perform analytical tests and analysis of bulk products, scale-up samples, process validation samples and stability samples using a variety of standard and advanced analytical techniques. Perform data analysis and evaluation of test...
-
Chemist
2 weeks ago
Hunt Valley, United States Pharmaceutics International Inc Full timeJob DescriptionJob DescriptionJob Title: ChemistJob Description:Perform analytical testing of raw materials, in-process materials and finished products. Perform analytical tests and analysis of bulk products, scale-up samples, process validation samples and stability samples using a variety of standard and advanced analytical techniques. Perform data...
-
Chemist
2 days ago
Hunt Valley, United States Pharmaceutics International Inc Full timeJob DescriptionJob DescriptionJob Title: ChemistJob Description:Perform analytical testing of raw materials, in-process materials and finished products. Perform analytical tests and analysis of bulk products, scale-up samples, process validation samples and stability samples using a variety of standard and advanced analytical techniques. Perform data...
-
Cost Control Engineer
16 hours ago
Spring, United States Airswift Full timeAirswift is looking for a Cost/ Schedule/ Controls Engineer / Specialist III to work with a major client in Spring, TX on a contract assignment. The Cost/Schedule/Controls Engineer will perform or coordinate effort for cost estimate preparation, estimating oversight and quality assurance reviews for Company operated and Other Builder Operator estimates for...
-
Cost Control Engineer
2 days ago
Spring, United States Airswift Full timeAirswift is looking for a Cost/ Schedule/ Controls Engineer / Specialist III to work with a major client in Spring, TX on a contract assignment. The Cost/Schedule/Controls Engineer will perform or coordinate effort for cost estimate preparation, estimating oversight and quality assurance reviews for Company operated and Other Builder Operator estimates for...
-
Cost Control Engineer
4 days ago
Spring, United States Airswift Full timeAirswift is looking for a Cost/ Schedule/ Controls Engineer / Specialist III to work with a major client in Spring, TX on a contract assignment. The Cost/Schedule/Controls Engineer will perform or coordinate effort for cost estimate preparation, estimating oversight and quality assurance reviews for Company operated and Other Builder Operator estimates for...
-
Cost Control Engineer
4 days ago
Spring, United States Airswift Full timeAirswift is looking for a Cost/ Schedule/ Controls Engineer / Specialist III to work with a major client in Spring, TX on a contract assignment. The Cost/Schedule/Controls Engineer will perform or coordinate effort for cost estimate preparation, estimating oversight and quality assurance reviews for Company operated and Other Builder Operator estimates for...
-
Quality Control Manager
17 hours ago
Simi Valley, United States Pacific Federal Management Full timeJob Description Job Description Summary/Objective As a Quality Control Manager, you will be responsible for periodically evaluating programs to ensure that the quality, integrity, and efficiency standards are being set and met by the organization. Essential Functions Responsible for overseeing the Quality Control department and supervise staff. Conducts...
-
Quality Control Manager
2 weeks ago
West Valley City, United States Huish Outdoors Full timeHuish Outdoors products are fueling the human spirit for adventure by keeping people active, exploring, and enjoying the world's outdoor environments, both above and below the surface. As a team, we are passionate about what we do and who we are. Our team is made up of amazing people who are outdoor enthusiasts that embrace and drive change. Working closely...
-
Quality Control Checker
2 weeks ago
Moreno Valley, United States NFI Industries Full time**Quality Control Checker** location Moreno Valley, CA, USA category Warehouse / Distribution Full-Time Job ID: QUALI015625 Posted: Feb 17th 2022 JOB DESCRIPTION The **Quality Control Checker** is responsible for the accurate checking or counting of all products for both inbound and outbound freight. **1st Mon-Thurs 5am-3:30pm and 4th Fri-Monday 1pm-11:30pm...
-
Quality Manager
13 hours ago
Spring Valley, New York, United States IFF Family of Companies Full timeRequisition ID : 500451 Job Description At IFF, an industry leader in food, beverage, health, biosciences, and sensorial experiences, science, and creativity meet to create essential solutions for a better world – from global icons to unexpected innovations and experiences. With the beauty of art and the precision of science, we are an international...
-
Engineer III
10 hours ago
Silver Spring, United States Trinity Health Full timeEmployment Type: Full timeShift: Evening Shift Description: Job Title: Engineer III Employment Type: Full Time Shift: Evening (SUMMARY) Position Highlights: Competitive salary Benefits - Medical, Dental & Vision, PTO, Free Parking, Metro Access, Tuition Reimbursement, 403(b) Quality of Life: Flexible work schedules Advancement: Career growth opportunities...
-
Quality Control Inspector
1 week ago
Simi Valley, United States PrideStaff Full timeJob DescriptionJob DescriptionAerospace Quality Control InspectorA growing, global company specializing in designing, developing, prototyping and manufacturing electronic products and subsystems for aerospace and defense is looking for a Quality Inspector. In this role you will verify products manufactured by Suppliers and manufactured by client are...
-
Manager, Quality Assurance
1 month ago
Simi Valley, United States Regal Rexnord Full timeManage and coordinate all Quality Inspection and Calibration activities at Regal Rexnord PSI Bearings location. Provide daily support to Manufacturing, Manufacturing Engineering, Purchasing and Contracts in Inspection related issues, drive continuous improvement initiatives throughout the manufacturing & inspection processes. Key Accountabilities -...
-
Technical Support Specialist Iii
4 weeks ago
Prescott Valley, United States Country Supplier Full time**About the Company**: Country Supplier is the home of two familiar brands: CAL Ranch Stores in Idaho, Utah, Nevada and Arizona, and Coastal Farm and Ranch in Washington and Oregon. Operating 55 stores combined, Country Supplier offers retail agriculture, sporting goods, and more to our communities, driven by a mission statement that includes the directive...
-
CNC Machinist II/III
15 hours ago
Coon Valley, United States ati Full time**Position** : CNC Machinist II/III **Location** : Coon Valley, WI **Requisition ID:** : 24-2582 **Proven to Perform.** From the edges of space to the bottoms of ocean, our materials are proven to perform -- and so is our team. We're hiring high performers as proven as our products. Join us. We are currently seeking a CNC Machinist II or III to join our Coon...
-
Automation & Controls Engineer III
6 hours ago
West Valley City, United States Dennis Group Full timeJob Summary As a design build engineering firm and general contractor that designs and builds food and beverage processing facilities, Dennis Group's automation & controls engineers work closely with our process, packaging and building engineers to meet our clients' expectations in startup, commissioning, and qualifying their food and beverage production...
-
Laboratory Animal Technician III- Swine
1 month ago
Silver Spring, United States SoBran, Inc. Full timeJob DescriptionJob DescriptionOVERVIEW: Responsibilities of this position are that of a Laboratory Animal Technician III (Swine) for the Animal Care Project. These responsibilities include all activities required for the proper care and maintenance of on-site animals. All employees are expected to perform their duties as assigned, arrive to work at 7 am and...
-
Spring Hill, TN
19 hours ago
Spring Hill, United States All-American Pest Control, Inc. Full timePest Control Service Team Member - 4 Day Work Week - No Weekends!Who Doesn't Love the Idea of a 4-Day Work Week? As a third-generation family-owned business, we value our employees and customers alike. We're passionate about fostering an environment that allows all contributing team members to experience meaningful work and have time for meaningful...