![Smith & Richardson](https://media.trabajo.org/img/noimg.jpg)
CNC Set-Up Operator
1 week ago
We are...
Spirit..Attitude...Neighborly...Dedication...Respect (S and R)
** $500 bonus per month for the first 6 months of employment for full time CNC Operators. (Must be employed at the end of the month)**
Looking for motivated and dedicated candidates to join our team
General Description:
Set-up, operate, and trouble shoot a variety of machines including CNC, VMC, and SWISS machines. Responsible for first inspection and inspection during production, and responsible for updating and maintaining set-up sheet and program.
Responsibilities:
- Set-up machines following blue prints and according to work order
- Load material on machines as needed: band and wire on slide form, radiator, multiplex, large and small dial; coil on punch press, cut off machine; strips on automatics, punch press; sheets on slitters, shears, perforators; bars on automatic feed saw; bath in plating; parts on groovers
- Fine tune machine until product passes first inspection
- Operate machine if required: feed band on automatics, assemble two plates and a stem on the hand weld machine
- Read, understand information in workmanship standards
- Fill out appropriate sections of work order
- Handle, store, use micrometers, calipers, gages appropriately
- Perform and document S&R inspection procedures when appropriate (SPC charts, work orders, move tickets)
- Identify nonconforming product or material
- Wash tools and return to storage area
- Oil, lube, clean and perform minor repairs as needed
- Communicate with tool room or maintenance as required by supervisor
- Assist with training of Operator persons as needed
- Know and follow safety standards
- Participate in corrective actions as required
- Move parts to next operation
- Remove scrap
- Operate pallet trucks
Physical and Visual Activities:
- Standing, walking, sitting, lifting, carrying, pushing, pulling, balancing, stooping, kneeling, crouching, crawling, reaching, handling, fingering, feeling, talking, hearing, visual acuity-far/near depth perception, field of vision and accommodation
Physical Demands:
- Lift up to 75 pounds
Environmental/Atmospheric Conditions:
- Indoor conditions, noise, hazards, odors, toxic conditions, dust, and periods of travel to support company's international facilities may be required
Job Qualification Requirements:
- Knowledge
- High school graduate or equivalent; reading, basic math, blueprint reading
- Three to five years' experience with metal stamping, wire forming machinery
- Tool design, machine repair helpful
- Experience
- Training Period: 3 months to a year
- Machines, Tools, Equipment
- CNC, hand tools, measuring instruments, surface and bench grinders. Lathe, mill, and drill press experience helpful
- Information/Directions
- Written and verbal work instructions, workmanship standards book (engineer drawings), quality control documentation (work orders, move tickets)
-
CNC Set-Up Operator
1 month ago
Geneva, United States Smith & Richardson Full timeJob DescriptionJob DescriptionWe are...Spirit..Attitude...Neighborly...Dedication...Respect (S and R)** $500 bonus per month for the first 6 months of employment for full time CNC Operators. (Must be employed at the end of the month)** Looking for motivated and dedicated candidates to join our team!General Description:Set-up, operate, and trouble shoot a...
-
CNC Set-Up Operator
4 weeks ago
Geneva, United States Smith & Richardson Full timeJob DescriptionJob DescriptionWe are...Spirit..Attitude...Neighborly...Dedication...Respect (S and R)** $500 bonus per month for the first 6 months of employment for full time CNC Operators. (Must be employed at the end of the month)** Looking for motivated and dedicated candidates to join our team!General Description:Set-up, operate, and trouble shoot a...
-
CNC Set-Up Operator
4 weeks ago
Geneva, United States Smith & Richardson Full timeJob DescriptionJob DescriptionWe are...Spirit..Attitude...Neighborly...Dedication...Respect (S and R)** $500 bonus per month for the first 6 months of employment for full time CNC Operators. (Must be employed at the end of the month)** Looking for motivated and dedicated candidates to join our team!General Description:Set-up, operate, and trouble shoot a...
-
CNC Lathe Set Up/Operator
4 weeks ago
Geneva, United States Just In Time Staffing LLC Full timeJob DescriptionJob DescriptionJob Title: CNC Lathe Set Up/OperatorShifts: 1st 7am - 3:30pm or 2nd shift 3pm - 11:30pm (Monday to Friday)Reports to: Production ManagerPay: $24.00 - $33.00Location: Geneva, ILRequirements: Drug test, E-verify, Resume, Interview and client performs its own background checkGeneral Description:Set-up, operate, and troubleshoot a...
-
CNC Lathe Set Up/Operator
4 weeks ago
Geneva, United States Just In Time Staffing LLC Full timeJob DescriptionJob DescriptionJob Title: CNC Lathe Set Up/OperatorShifts: 1st 7am - 3:30pm or 2nd shift 3pm - 11:30pm (Monday to Friday)Reports to: Production ManagerPay: $24.00 - $33.00Location: Geneva, ILRequirements: Drug test, E-verify, Resume, Interview and client performs its own background checkGeneral Description:Set-up, operate, and troubleshoot a...
-
CNC Lathe Set Up/Operator
4 weeks ago
Geneva, United States Just In Time Staffing LLC Full timeJob DescriptionJob DescriptionJob Title: CNC Lathe Set Up/OperatorShifts: 1st 7am - 3:30pm or 2nd shift 3pm - 11:30pm (Monday to Friday)Reports to: Production ManagerPay: $24.00 - $33.00Location: Geneva, ILRequirements: Drug test, E-verify, Resume, Interview and client performs its own background checkGeneral Description:Set-up, operate, and troubleshoot a...
-
SWISS CNC Set-Up Lead
1 week ago
Geneva, United States Smith & Richardson Full timeJob DescriptionJob DescriptionGeneral Description:Set-up, operate, and trouble shoot a variety of machines including CNC, VMC, and SWISS machines. Responsible for first inspection and inspection during production, and responsible for updating and maintaining set-up sheet and program.Responsibilities:Set-up machines following blue prints and according to work...
-
CNC Programmer
3 weeks ago
Geneva, United States Smith & Richardson Full time**Job Title**: CNC Programmer **Reports to**: Production Manager **General Description**: Improve existing and develop new processes throughout the general factory; program CNC equipment; write new and update code for existing programs, create new drawings for parts and tools. **Responsibilities**: - Programming (60%) - Program and or Setup CNC Swiss,...
-
CNC Operator
2 months ago
Lake Geneva, United States Parallel Employment Full timeParallel Employment is looking for a CNC Operator to join our team in the warehousing industry. As a member of our team, you'll have the opportunity to work with a company that has a strong focus on passion, creativity, integrity, and teamwork. We're looking for someone who shares those values and is ready to work with us to shape our culture and build a...
-
CNC Operator
1 week ago
Lake Geneva, Wisconsin, United States Parallel Employment Full timeParallel Employment is looking for a CNC Operator to join our team in the warehousing industry. As a member of our team, you'll have the opportunity to work with a company that has a strong focus on passion, creativity, integrity, and teamwork. We're looking for someone who shares those values and is ready to work with us to shape our culture and build a...
-
CNC Operator
4 weeks ago
Lake Geneva, United States Parallel Employment Full timeParallel Employment is looking for a CNC Operator to join our team in the warehousing industry. As a member of our team, you'll have the opportunity to work with a company that has a strong focus on passion, creativity, integrity, and teamwork. We're looking for someone who shares those values and is ready to work with us to shape our culture and build a...
-
CNC Programmer
4 weeks ago
Geneva, United States Smith & Richardson Full timeJob DescriptionJob DescriptionJob Title:CNC ProgrammerReports to:Production ManagerGeneral Description:Improve existing and develop new processes throughout the general factory; program CNC equipment; write new and update code for existing programs, create new drawings for parts and tools.Responsibilities:Programming (60%)Program and or Setup CNC Swiss, CNC...
-
CNC Programmer
3 months ago
Geneva, United States Smith & Richardson Full timeJob DescriptionJob DescriptionJob Title:CNC ProgrammerReports to:Production ManagerGeneral Description:Improve existing and develop new processes throughout the general factory; program CNC equipment; write new and update code for existing programs, create new drawings for parts and tools.Responsibilities:Programming (60%)Program and or Setup CNC Swiss, CNC...
-
CNC Machinist
4 weeks ago
Lake Geneva, United States The Adecco Group Full timeOf Job: The CNC Machinist is responsible for setting up, operating, and maintaining a diverse range of machining tools to produce precision parts, encompassing new designs, modifications, and repairs. Utilizing expertise in mechanics, mathematics, me CNC Machinist, CNC, Machinist, Operations, Mechanical, Manufacturing, Staffing, Equipment
-
Technician (Press Set-Up), 3rd Shift
1 month ago
Geneva, United States Burgess Norton Mfg Co Full timeJob DescriptionJob DescriptionAmsted Automotive Group, Powder Metal in Geneva, IL is looking for a Technician (Press Set-Up) to perform duties to set-up all equipment in the department on the 3rd shift (10:30pm-7am).WHAT YOU’LL DO Work from instructions, prints and process specifications to:1. Set-up machines and adjusts as required including calibrated...
-
Technician (Press Set-Up), 3rd Shift
4 weeks ago
Geneva, United States Burgess Norton Mfg Co Full timeJob DescriptionJob DescriptionAmsted Automotive Group, Powder Metal in Geneva, IL is looking for a Technician (Press Set-Up) to perform duties to set-up all equipment in the department on the 3rd shift (10:30pm-7am).WHAT YOU’LL DO Work from instructions, prints and process specifications to:1. Set-up machines and adjusts as required including calibrated...
-
Tool Crib Attendant
1 month ago
Geneva, United States Smith & Richardson Full timeJob DescriptionJob DescriptionJob Title:Tool Crib AttendantReports to:Production ManagerGeneral Description:Prepare and Pre-stage all tool kits for set-ups. Be responsible for all tool inventory, reordering and tool sharpening. Maintain and document tool history. Responsibilities:Pre-stage duties (40%)Pre-stage all tooling, holders and collects required for...
-
Automation Technician
1 week ago
Geneva, United States Burgess Norton Mfg Co Full timeJob DescriptionJob DescriptionWHAT YOU’LL DOAmsted Automotive Group, BN Powder Metal Division in Geneva, IL is seeking a 1st shift Automation Technician to perform duties to set-up, program, troubleshoot, and repair automation equipment. Shift hours are 6:30am to 3pm.The Automation Technician will work from instructions, prints and process...
-
Lathe Operator
1 month ago
Geneva, United States Burgess Norton Mfg Co Full timeJob DescriptionJob DescriptionABOUT THE ROLEAmsted Automotive Group in Geneva, IL in our Powder Metal Operations is looking for a Lathe Operator to operate CNC lathes on the 3rd shift (10:30pm-7am).WHAT YOU’LL DO Perform duties to operate one type of machine. Work from instructions, prints and process specifications.Process quality parts to process...
-
Lathe Operator
2 weeks ago
Geneva, United States Burgess Norton Mfg Co Full timeJob DescriptionJob DescriptionABOUT THE ROLEAmsted Automotive Group in Geneva, IL in our Powder Metal Operations is looking for a Lathe Operator to operate CNC lathes on the 3rd shift (10:30pm-7am).WHAT YOU’LL DO Perform duties to operate one type of machine. Work from instructions, prints and process specifications.Process quality parts to process...