Test Engineer/Failure Analysis Lead

2 weeks ago

Melbourne, United States Mack Technologies Full time
Job DescriptionJob DescriptionSalary:

The Test Engineer/Failure Analysis Lead is responsible for organizing and directing the debugging team to meet their daily schedule.  The individual will provide first level technical support to the manufacturing process, support production and setup test equipment including hardware setup and software development specific to customer requirements. (100% onsite)


Essential Duties and Responsibilities

  • Work from test procedures, electrical schematics, technical notes, diagnostics and component data sheets to identify and isolate the root cause of defective components, piece parts and sub-assemblies of failing products.
  • Participate in the development of new product procedures and assist engineering in the development of new product procedures.
  • Support production with failure analysis, test debugging, reduction of false failures and downtime of test equipment.
  • Lead and drive test improvement including but not limited to: reduction in time, improvements in test coverage, improving automation of test equipment and a reduction in debugging time.
  • Participate in the review of capital investments including various pieces of test equipment to improve capabilities and capacity.
  • Participate in quality reviews to aid in reduction of quality escapes through improved test coverage, capability and improved automation.
  • Develop documentation of procedures to be used from the initial test design phase to production.
  • Generate monthly and quarterly reports and analysis of test data, debugging and prepare documentation and recommendations for customers.
  • Review test equipment designs, test capacity, data and RMA issues with customers on a regular basis.
  • Direct and coordinate engineering activities concerned with development, procurement, installation and calibration of instruments, equipment, control devices required to test, debugging record and reduce test data.
  • Direct and exercise control over operational, functional and performance phases of tests and debugging.
  • Analyze and interpret test data and prepare technical reports for use by Test Engineering and Management personnel.
  • Maintain customer supplied test inventory.
  • Perform routine technique development and maintenance, subject to established Mack Technologies standards, including ISO and AS9100 development standards.
  • Provide training in new procedures to production test operators, debug technicians and the Test Engineering Dept.
  • Comply and follow all procedures within the Company security policy.
  • Responsible for the cleanliness of work and surrounding area.
  • Other responsibilities as directed and necessary for the business.

 

Qualifications

  • Bachelor of Science degree in Computer Science, Electronic or Electrical Engineering or equivalent.
  • 2 + years of experience as a Test Engineer in a manufacturing environment.
  • Experience with networking hardware and software preferred.
  • Experience with designing test fixtures.
  • Genrad ICT development and debugging experience a plus.
  • Languages: Visual Basic, .NET, C++, C, Lab-View and Shell Scripting.
  • Applications: MS Office Suite, AutoCAD, Altium Designer, Visual Basic and Master Control.
  • Knowledge and use of an ERP system.
  • Flying probe development and debugging, a plus.
  • Understanding of basic electro-mechanical tools (multi-meters, calipers, oscilloscopes, microscopes, logic analyzers) and basic hand tools (wrench, torque drivers etc.).
  • Ability to interpret detailed drawings, schematics and diagrams.
  • Ability to design creative manufacturing and process solutions that meet both the company and customer goals concurrently.
  • Ability to define problems, collect data, establish facts and draw valid conclusions.
  • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
  • Must be able to function effectively in a dynamic environment with constant changes in priorities.
  • Must be able to function effectively in a team environment and interact with multiple departments across the Company.
  • Experience with problem solving and troubleshooting skills using solid Six Sigma or Lean Methods.
  • Experience with test process (including equipment and operator) validation methods.
  • Knowledge of ISO9001 Quality System/manufacturing requirements.
  • Willingness to work flexible hours as necessary.
  • US Person as defined in 22 CRF Part 120.15 (U.S. citizens, lawful permanent residents, refugees and those given asylum in the United States, and temporary residents granted amnesty) since work includes ITAR controlled technical data.

  • Lead Materials

    2 weeks ago

    Melbourne, FL, United States L3Harris Technologies Full time

    Job Title: Lead Materials & Process Engineer Job Code: 8674 Job Location: Palm Bay, FL Job Description: L3Harris has an immediate need for a Lead Materials and Processes Engineer responsible for the evaluation, selection, testing, and analysis of non-metallic and composite materials used in Aerospace, Geospace, and Defense programs. Lead material reviews and...

  • Electrical Engineer

    1 month ago

    Melbourne, United States Sun Nuclear Corp Full time

    Job DescriptionJob DescriptionThe Electrical Engineer is a key member of the Functional Design team within the Product Development organization and is responsible for analog and digital circuitry design of Nuclear Medicine products, providing design solutions in a dynamic environment with a focus on analysis, DFx, documentation, prototyping, verification,...

  • Electrical Engineer

    2 weeks ago

    Melbourne, United States Mirion Full time

    The Electrical Engineer is a key member of the Functional Design team within the Product Development organization and is responsible for analog and digital circuitry design of Nuclear Medicine products, providing design solutions in a dynamic environment with a focus on analysis, DFx, documentation, prototyping, verification, and new product introduction.KEY...

  • Lead Test Technician

    2 weeks ago

    Melbourne, United States Leonardo DRS, Inc. Full time

    Provide technical support to engineers and scientist on a variety of complex components, devices, material, products, processes and/or equipment Work from complex wiring and assembly drawings, operation sheets, engineering specifications and sketches Test Technician, Technician, Technical Support, Lead, Mechanical, Manufacturing, Business Services

  • Electrical Engineer

    2 days ago

    Melbourne, United States Mirion Full time

    The Electrical Engineer is a key member of the Functional Design team within the Product Development organization and is responsible for analog and digital circuitry design of Nuclear Medicine products, providing design solutions in a dynamic environment with a focus on analysis, DFx, documentation, prototyping, verification, and new product introduction....

  • Test Lead/Architect

    4 days ago

    Melbourne, United States Diverse Lynx Full time

    Role: Test Lead/Architect Location: Melbourne, FL Required Technical Skill Set:- Must Have Rail Road Domain Experince. Good experience with Rail domain so that team can understand the manual test cases from Legacy application being enhanced to web based microservices based arictect, interpret them, update as required and convert/ write new test in automation...

  • Test Lead/Architect

    2 weeks ago

    Melbourne, United States Diverse Lynx Full time

    Role: Test Lead/Architect Location: Melbourne, FL Required Technical Skill Set:- Must Have Rail Road Domain Experince. Good experience with Rail domain so that team can understand the manual test cases from Legacy application being enhanced to web based microservices based arictect, interpret them, update as required and convert/ write new test in...

  • Test Lead/Architect

    5 days ago

    Melbourne, United States Diverse Lynx Full time

    Role: Test Lead/Architect Location: Melbourne, FL Required Technical Skill Set:- Must Have Rail Road Domain Experince. Good experience with Rail domain so that team can understand the manual test cases from Legacy application being enhanced to web based microservices based arictect, interpret them, update as required and convert/ write new test in...

  • Fluids Engineer

    1 week ago

    Melbourne, United States latitude Full time

    Core Accountabilities and Essential Functions •Develop critical fluid subsystems including hydrogen storage and distribution and hydraulic controls for launch and recovery from design through operations (requirements formulation, iterative design process, first article builds, qualification, acceptance, production integration, continuous improvements, and...

  • Test Engineering Technician

    1 month ago

    Melbourne, United States Mack Technologies Full time

    Job DescriptionJob DescriptionSalary: SummaryThe Test Engineering Technician is responsible for supporting production for test equipment including hardware setup and software development, specific to customer requirements for Mack Technologies Florida, Inc. Reports to the Test Engineering Manager. Essential Duties and Responsibilities Continually optimize...

  • Fluids Engineer

    2 weeks ago

    Melbourne, United States Latitude, Inc. Full time

    Job DescriptionJob DescriptionCore Accountabilities and Essential Functions • Develop critical fluid subsystems including hydrogen storage and distribution and hydraulic controls for launch and recovery from design through operations (requirements formulation, iterative design process, first article builds, qualification, acceptance, production...

  • 187 - Senior Test Engineer Test - Melbourne, Florida

    1 month ago

    Melbourne, Florida, United States Azure Summit Technology Full time

    Azure Summit Technology is a mature, growing small business with locations in Melbourne, Florida, and Fairfax, Virginia. Azure develops and delivers high-performance RF hardware, firmware, and software products, and innovative, practical, multi-function RF systems solutions that address emerging missions of national importance for customers across the...

  • Field Test Engineer

    3 weeks ago

    Melbourne, United States Octasic Full time

    Job Description Founded in 1998, Octasic is a leading provider of systems and complete solutions in advanced communications. We provide state-of-the-art integration software, and hardware platforms for worldwide mobile wireless solutions. Octasic has offices worldwide and continues to expand. Why choose Octasic? It is a workplace at the cutting edge of...

  • Engineering Technician

    1 month ago

    Melbourne, United States Sun Nuclear Corp Full time

    Job DescriptionJob DescriptionThe Engineering Technician is responsible for build, test, troubleshoot, repair, and modify developmental and production components, parts, equipment, and systems by applying principles and theories of engineering, mathematics, testing and physics. Key Areas of Responsibility: Circuit troubleshooting and data collection to...

  • Field Test Engineer

    4 weeks ago

    Melbourne, United States Octasic Full time

    Founded in 1998, Octasic is a leading provider of systems and complete solutions in advanced communications. We provide state-of-the-art integration software, and hardware platforms for worldwide mobile wireless solutions. Octasic has offices worldwide and continues to expand. Why choose Octasic? It is a workplace at the cutting edge of technology, allowing...

  • Field Test Engineer

    1 month ago

    Melbourne, United States Octasic Full time

    Founded in 1998, Octasic is a leading provider of systems and complete solutions in advanced communications. We provide state-of-the-art integration software, and hardware platforms for worldwide mobile wireless solutions. Octasic has offices worldwide and continues to expand.Why choose Octasic?It is a workplace at the cutting edge of technology, allowing...

  • Field Test Engineer

    4 weeks ago

    Melbourne, United States Octasic Full time

    Founded in 1998, Octasic is a leading provider of systems and complete solutions in advanced communications. We provide state-of-the-art integration software, and hardware platforms for worldwide mobile wireless solutions. Octasic has offices worldwide and continues to expand.Why choose Octasic?It is a workplace at the cutting edge of technology, allowing...

  • Senior Hardware Systems Engineer

    4 weeks ago

    Melbourne, United States Avidyne Full time

    Avidyne is a leading provider of avionics to general and business aviation, and consists of a team of aviation enthusiasts uniquely positioned to play a key role in the next generation of personal aviation. Electric, vertical take-off, autonomous, helicopters, airplanes, experimental, you name it, we are working on avionics to make it better. About the...

  • Software Test Engineer

    4 weeks ago

    Melbourne, United States Tomahawk Robotics Full time

    Join our world-class team of technologists solving today’s toughest robotics challenges. Tomahawk Robotics provides next-generation interoperability and control to military, commercial, and industrial markets. As a Software Test Engineer, you will join a rapidly growing company designing cutting-edge software for a wide range of robotic platforms. Your...

  • Automation Test Engineer

    3 weeks ago

    Melbourne, United States Liberty IT Solutions Full time

    Summary : The Sr. Automation Tester (Quality Assurance role) assesses software quality through automated testing. The Sr. Automation Tester has experience working with developers, end users and organizations to create test plans and test scripts, coordinate with test sites and other team participants to plan test events and experienced in creating reports....