Machine Operator Packaging 3rd

3 weeks ago

West Jefferson, United States Kable Staffing Full time
Job DescriptionJob DescriptionKable staffing is hiring a Mixer for great client, West Jefferson, Ohio. This is a full time job, direct hire opportunity.PRINCIPAL DUTIES & RESPONSIBILITIES
  • Assumes personal responsibility to insure a safe and healthy workplace for everyone. Adheres to all safety policies/procedures and incorporates safety and health in all job's duties/tasks.
  • Adheres to safe work practices, follows GMP's, maintains sanitary conditions and ensures that product quality is maintained. Reports any conditions or practices that may adversely affect employee safety or food safety/quality to management immediately.
  • Attends and actively participates in safety meetings/trainings.
  • Ensures regulatory compliance at all times.
  • Strip the outer bags off of the bags of ingredients and pour into the appropriate container recording new lot numbers to meet USDA and Quality Assurance specifications.
  • Responsible for accurately weighting of all ingredients in order to ensure consistent batching of products.
  • Set up the mixing room and ensure the correct formulation of product and ingredients using the predetermined procedures approved by the company.
  • Ensure accuracy and quality of the individual batches to be mixed and transferred to the proper holding tank. Assemble and dissemble all piping and pumps in the room.
  • Set up for each line running ensuring there is a continuous flow of product to each line and that it will run out at the correct time.
  • Determine if product meets customer specs or not and take corrective action as needed.
  • Record appropriate LOT numbers, ph, on the batch sheets and usage forms to meet Quality Assurance and USDA specifications along with any other paperwork necessary for the position.
  • Maintain scales and meters as needed to get as precise and accurate readings as possible.
  • Have thorough knowledge of the Clean in Place (CIP) system in order to use it at the appropriate time.
  • Assist in the general good housekeeping of the area including pipes, pumps and tanks.
  • Perform other duties as assigned.
REQUIREMENTS
  • High school diploma or general education degree ((lED) or equivalent.
  • Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write
simple correspondence. Ability to effectively present information in one-on-one and small group situations.
  • Ability to add and subtract two-digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using units of American money and weight measurement, volume and distance.
  • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.
  • Ability to travel stairs.
  • Basic Computer skills, necessary to operate equipment controls.
  • Ability to plan activities and work independently.
  • Ability to communicate and get along with other employees.
  • Ability to read SOP's.
  • Mechanical aptitude.
  • Knowledge of pumps and valves with 6 to 12 months of related experience.
  • Ability to climb unto tankers with the use of safety harnesses.
  • Ability to operate specific equipment and tools.
WHY KABLE STAFFING?
  • Weekly Pay
  • Exclusive Access Opportunities to V.I.P. Vault
  • Day 1 Benefits
  • Various Bonus Opportunities
  • Eligibility for Employee of the Month Rewards
ABOUT THE KABLE GROUPFor over 50 years, The Kable Group has been committed to connecting candidates looking for reliable work opportunities with companies in need of workforce solutions. We leverage our expertise in core industries to ensure that the needs of our clients and our candidates alike are satisfied. Whether it’s a professional position, skilled labor need, or an education opportunity, The Kable Group’s suite of solutions caters to finding the right fit, every time.At the Kable Group, we do not just accept diversity — we celebrate it, we support it, and we thrive on it. Read our full diversity statement here.This job description is not intended to be all-inclusive and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required.

  • Machine Operator

    3 weeks ago

    West Bend, United States WFA Staffing Group Full time

    Job DescriptionJob DescriptionExcellent Company looking for Machine Operators 1st or 3rd shift.Must have the ability to Package and Assemble many different products.The qualified candidate should be able to stand for long periods of time, have a great attitude and good attendance. 

  • Fabrication Machine Operator

    2 days ago

    West Caldwell, United States System One Full time

    Fabrication Operator/Machine Operator (Pharmaceutical) West Caldwell, NJ 3rd shift open 1st shift 6:15- 2:30 PM M-F, 20-$22/hour 2nd shift 2:15pm-10:30pm, Mon-Fri, $22-$23/hour 3rd Shift, 10:15pm to 6:30am M-F, $23 to $24 per hour Are you looking for an exciting opportunity in the pharmaceutical manufacturing industry? As a Fabrication...

  • Machine Operator

    Found in: Appcast Linkedin GBL C2 - 3 days ago

    West Chester, United States Insight Global Full time

    Company OverviewInsight Global is assisting a large manufacturing client of ours in identifying a 3rd shift Machine operator in the West Chester, OH area. They are seeking someone that is able to work the 3rd shift (10pm to 6:30 am_ Monday through Friday with this role. Overtime is available but is not mandatory.Position SummaryAs an Entry-Level 3rd Shift...

  • Machine Operator

    Found in: Appcast US C2 - 2 days ago

    West Chester, United States Insight Global Full time

    Company OverviewInsight Global is assisting a large manufacturing client of ours in identifying a 3rd shift Machine operator in the West Chester, OH area. They are seeking someone that is able to work the 3rd shift (10pm to 6:30 am_ Monday through Friday with this role. Overtime is available but is not mandatory.Position SummaryAs an Entry-Level 3rd Shift...

  • Machine Operators

    2 weeks ago

    West Chester, United States PrideStaff Full time

    Job DescriptionJob DescriptionMachine OperatorsApply Today!!!Don't miss your chance to work with an established company that prides it self on keeping long term employees.Tool & Die, CNC, Brake Press, EDM Wire, Saw and Laser Table Machinists Needed Rate of Pay: $18-$35hrShift: 1st, 2nd, 3rd Machine Operators ResponsibilitiesUtilizing various tools and...

  • Warehouse Forklift Operator

    2 weeks ago

    West Jefferson, United States CJ Logistics USA Corporation Full time

    The Forklift Operator is responsible for safely operating a forklift to perform responsibilities within the warehouse operations. Essential Duties & Responsibilities: Load, unload, pick, put away, consolidate, stack, and stage products and materials Forklift Operator, Lift Operator, Warehouse, 3rd Shift, Forklift, Operator, Manufacturing, Transportation

  • Machine Operator Filler

    3 weeks ago

    West Jefferson, United States Kable Staffing Full time

    Job DescriptionJob DescriptionKable staffing is hiring a Machine Operator Filler for great client, West Jefferson, Ohio. This is a full time job, direct hire opportunity.PRINCIPAL DUTIES & RESPONSIBILITIESAssumes personal responsibility to insure a safe and healthy workplace for everyone. Adheres to all safety policies/procedures and incorporates safety and...

  • Packaging Operator 2nd Shift

    Found in: beBee jobs US - 2 weeks ago

    Jefferson City, Missouri, United States ALPLA INC. Full time

    What you will enjoy doing2nd Shift Position - 4:00 PM - 12:30 AM Monday - FridaySetup and operate multiple types of packaging equipment. Equipment may include, but is not limited to:carton erectorspartition insertersproduct inserters (MPV, VPM, PLU)foil dispenserstop closerspalletization equipmentManual responsibilities include:building and make boxeshand...

  • 3rd Grade Teacher

    Found in: Talent US A C2 - 3 weeks ago

    Jefferson, United States Soliant Full time

    Minimum 1+ years teaching experience required.About Us: Soliant Education is a dedicated educational institution with a strong commitment to providing an enriching and supportive learning environment for students. We believe in fostering the academic, social, and emotional growth of our students through innovative and comprehensive educational approaches....

  • Machine Operator

    2 weeks ago

    West Warwick, United States Manufacturing llc Full time

    Job DescriptionJob DescriptionBenefits:Company partiesDental insuranceEmployee discountsHealth insuranceOpportunity for advancementTraining & developmentVision insuranceWellness resourcesBenefits/PerksCompetitive PayCareer AdvancementJob SummaryWe are seeking an experienced Machine Operator to join our team. In this role, you will set up, maintain, and...

  • Machine Operator

    Found in: Talent US C2 - 2 weeks ago

    West Palm Beach, United States TempExperts Full time

    Machine Operator West Palm Beach, FL TempExperts is seeking a Machine Operator to join a great company in West Palm Beach, FL Responsibilities will include but not be limited to: Monitoring and operating control room panels, displays, and graphics to maintain operations according to parameters and monitor system performance to meet targets. Operating...

  • Packaging Operator

    1 week ago

    West Bend, United States Celerity Staffing Solutions Full time

    Job DescriptionJob Description12 HOUR NIGHTS 6pm-6amWeek 1 Mon Tues Fri SatWeek 2 Sun Wed ThurSetup and operate multiple types of packaging equipment. Equipment mayinclude, but is not limited to:o carton erectorso partition inserterso product inserters (MPV, VPM, PLU)o foil dispenserso top closerso palletization equipment? Manual responsibilities include:o...

  • CNC Machinist

    3 weeks ago

    West Harrison, United States M-TECH Machine Products LLC Full time

    Job DescriptionJob DescriptionM-TECH Machine Products LLC is looking for a skilled Full-Time, CNC Machinist for our Vertical Machining Centers.This is a 1st Shift PositionSkills:Responsible for the operation of one or more CNC Vertical Machining Centers.Be able to adhere to all tolerance requirements. Verify set-up and machined part accuracy.Duties:Operation...

  • CNC Machinist

    2 weeks ago

    West Harrison, United States M-TECH Machine Products LLC Full time

    Job DescriptionJob DescriptionM-TECH Machine Products LLC is looking for a skilled Full-Time, CNC Machinist for our Vertical Machining Centers.This is a 1st Shift PositionSkills:Responsible for the operation of one or more CNC Vertical Machining Centers.Be able to adhere to all tolerance requirements. Verify set-up and machined part accuracy.Duties:Operation...

  • Packaging Operator

    3 days ago

    West Bend, United States Celerity Staffing Solutions Full time

    Job DescriptionJob Description12 HOUR NIGHTS 6pm-6amWeek 1 Mon Tues Fri SatWeek 2 Sun Wed ThurSetup and operate multiple types of packaging equipment. Equipment mayinclude, but is not limited to:o carton erectorso partition inserterso product inserters (MPV, VPM, PLU)o foil dispenserso top closerso palletization equipmentManual responsibilities include:o...

  • Production Mill Operator

    Found in: Resume Library US A2 - 5 days ago

    West Chicago, Illinois, United States INX International Ink Co. Full time

    Job Description We are seeking Hockmeyer Operator to manufacture high-quality printing ink. We will train right candidate to operate a Hockmeyer l Machine and on TPM activities. As a Hockmeyer Operator you will be responsible for: Running batches of ink at proper mill settings. Packaging finished product in various containers and apply labels Cleaning...

  • CNC Machine Operator, 2nd Shift>

    2 weeks ago

    West Chicago, United States STERIS Full time

    Steris Corporation - West Chicago, IL, US, 60185 [Production Operator] As a Machine Operator at Steris Corporation, you'll: Be responsible for set-up and operation of laser cutting machines to produce products meeting customer quality requirements; Operate and process parts according to print and traveler requirements; Monitor machine cutting performance and...

  • Material Handler/forklift Operator

    4 days ago

    West Bend, United States WB Warehousing & Logistics Full time

    **The Shift: 3rd shift... Sunday - Thursday 8:30p-5am,** **you will train on 1st or 2nd shift for about 2 weeks before going to 3rd shift.** **Forklift Operator Responsibilities**: Loading, unloading, staging, and shrink-wrapping warehouse items. Transporting materials to different locations within the facility. Optimizing loads to ensure operational...

  • Quality Assurance Techs 3rd

    3 weeks ago

    West Jefferson, United States Kable Staffing Full time

    Job DescriptionJob DescriptionKable staffing is hiring a Quality Technician for great client, West Jefferson, Ohio. This is a full time job, direct hire opportunity.This position has the responsibility to comply with safety work rules at all times as well as an obligation to reinforce safety as a core value. Ensures that all policies, procedures and...

  • Material Handler/Forklift Operator

    5 days ago

    West Bend, United States WB Warehousing & Logistics Full time

    Job DescriptionJob DescriptionWB Warehouse is looking for technically skilled candidates with excellent attention to detail for the position of Forklift Operator. Forklift operators are responsible for optimizing loads to ensure operational efficiency, utilizing forklifts to ensure the proper warehousing of materials, and managing inventory by utilizing RF...