See more Collapse

Tool and Die Polisher- 2nd Shift

1 month ago

Cleveland, United States Mid-West Forge Corporation Full time
Job DescriptionJob Description

Overview: The die polisher supports the Forge department with the maintenance and repair of all tooling/dies for the Manual and Automatic Upsetter machines.

Essential Duties and Responsibilities:

  • Responsible for all aspects of assembling, reconditioning, benching, changing, and cleaning up the tooling for use in the manual and automatic upsetters.
  • Document process measurements using the required forms.
  • Must be proficient using measuring instruments such as micrometers, calipers, and other gages to ensure conformance to specifications.
  • Resurface and clean dies/tooling using hand tools: powered drill, grinder, and files, and any other hand tools.
  • Inspects dies for cracks and smoothness of finish as well as conformance to specs.
  • Measures diameter of die openings for conformance to specifications, using steel gauge pins and micrometer
  • Inspects worn dies to determine their extent of wear to determine salvageability of die/tooling
  • Analyzes defective parts to determine cause of defect and recommends changes or modifications.
  • Deciphers blueprints of parts, machines and/or dies
  • Maintains a clean work area, machines, tools, and equipment.
  • Follows all safety and plant rules and regulations.
  • Performs other duties as assigned.

Supervisory Responsibilities:

This role has no supervisory responsibilities.

Education and/or Experience:

  • High school diploma or general education degree (GED) preferred.
  • One to three months related experience and/or training preferred

Key Competencies

Communication Skills:

  • Ability to read and write simple instructions, short correspondence, and memos.
  • Ability to effectively report relevant data and job specific information as needed

Mathematical Skills:

  • Ability to perform intermediate mathematics.
    • Ability to convert fractions to decimals

Computer Skills:

  • Ability to navigate basic technology including but not limited to the use of digital self-service platforms, time clocks and other systems where applicable.

Additional Preferred Skills and Experience:

  • Satisfactory completion of Bennett Mechanical Comprehension Test.
  • Demonstrated ability using measurement devices such as micrometers, calipers, etc.
  • Possess a good mechanical aptitude.
  • Previous experience with crane operation.

Physical Demands:

  • Stand, walk, push, pull, squat, bend, and reach during shifts
  • Use carts, dollies, cranes and jacks to transport material when needed
  • Must be able to regularly lift and or move up to 55 lbs.
  • Tolerate potentially extreme temperature fluctuations impacted by weather and machinery
  • Acclimate to high noise and vibration levels in work spaces
  • Wear and adhere to all PPE guidelines including hard hats, protective eye wear, ear plugs, and approved footwear with metatarsal and steel toe safeguards.
  • Comfortable working in confined work environments

Work Environment: The Die Polisher interacts with historic machinery within the facility which often involves proximity to heat, noise, debris, conveyance systems and other potentially dangerous equipment. The Die Polisher may encounter high levels of floor and overhead traffic due to material transportation within the department which can cause high levels of vibration and airborne disturbances.

Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.

We have other current jobs related to this field that you can find below

  • Tool and Die Maker

    7 days ago

    Cleveland, United States PrecisionTech Recruiting Full time

    Job DescriptionJob DescriptionTool and Die MakerCleveland, OH Area$33.84 HR ($1.50 2nd shift premium) Our client is a metal product manufacturer in the automotive/truck industry. They are looking for a 2nd shift tool and die maker with 1+ years of experience. Why apply?Generous Benefits2 weeks vacation in first 6 monthsCompetitive...

  • Tool and Die Maker

    4 weeks ago

    Cleveland, United States Howmet Aerospace Full time

    Job DescriptionJob Description**Job Description:**This position is responsible for the mechanical construction of our molds and dies. This work requires the application of standard mold making techniques, procedures, and criteria.Responsible for leading the construction of several products concurrently.Interpret design blueprints to determine die / mold...

  • Tool and Die Maker

    2 weeks ago

    Cleveland, United States Lincoln Electric Full time

    Job DescriptionJob DescriptionPURPOSE: Design, build, rework, maintain, repair and troubleshoot all forms of tooling (including dies,tools, gauges, fixtures, and molds).[Primarily 1st Shift with an occasional rotation to 2nd shift for Production Support every 8-12 weeks]JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES):Interact with QA, production, R&D,...

  • Tool and Die Maker

    4 weeks ago

    Cleveland, United States Lincoln Electric Full time

    Job DescriptionJob DescriptionPURPOSE: Design, build, rework, maintain, repair and troubleshoot all forms of tooling (including dies,tools, gauges, fixtures, and molds).[Primarily 1st Shift with an occasional rotation to 2nd shift for Production Support every 8-12 weeks]JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES):Interact with QA, production, R&D,...

  • Tool and Die Maker

    1 month ago

    Cleveland, United States Aspirant RPO LLC Full time $30 - $38

    This position is responsible for the mechanical construction of our molds and dies.  This work requires the application of standard mold making techniques, procedures, and criteria.Responsible for leading the construction of several products concurrently.Interpret design blueprints to determine die / mold making plan.Perform operations within very close...

  • Tool and Die Maker

    3 weeks ago

    Cleveland, United States Aspirant RPO LLC Full time

    This position is responsible for the mechanical construction of our molds and dies.  This work requires the application of standard mold making techniques, procedures, and criteria.Responsible for leading the construction of several products concurrently.Interpret design blueprints to determine die / mold making plan.Perform operations within very close...

  • Tool and Die Maker

    4 weeks ago

    Cleveland, United States Aspirant RPO LLC Full time $30 - $38

    This position is responsible for the mechanical construction of our molds and dies.  This work requires the application of standard mold making techniques, procedures, and criteria.Responsible for leading the construction of several products concurrently.Interpret design blueprints to determine die / mold making plan.Perform operations within very close...

  • Tool and Die Maker, 2nd Shift

    4 weeks ago

    Cleveland, United States Howmet Aerospace Full time

    ResponsibilitiesJob Description: This position is responsible for the mechanical construction of our molds and dies. This work requires the application of standard mold making techniques, procedures, and criteria. Responsible for leading the construction of several products concurrently. Interpret design blueprints to determine die / mold making plan....

  • Tool and Die Maker, 2nd Shift

    4 weeks ago

    Cleveland, United States Howmet Aerospace Full time

    ResponsibilitiesJob Description: This position is responsible for the mechanical construction of our molds and dies. This work requires the application of standard mold making techniques, procedures, and criteria. Responsible for leading the construction of several products concurrently. Interpret design blueprints to determine die / mold making plan....

  • Tool and Die Maker

    4 weeks ago

    Cleveland, United States Arrowhead Talent Solutions Full time

    **This is a Second Shift Position, Second shift is 3:30p-2a**Company Summary: A leading provider of acoustical/thermal and air-flow management products for the transportation, consumer, industrial and heavy equipment industries. The company is a full-service supplier that works in close collaboration with its customers to develop solutions that are both cost...

  • Tool and Die Maker

    4 weeks ago

    Cleveland, United States Arrowhead Talent Solutions Full time

    **This is a Second Shift Position, Second shift is 3:30p-2a** Company Summary: A leading provider of acoustical/thermal and air-flow management products for the transportation, consumer, industrial and heavy equipment industries. The company is a full-service supplier that works in close collaboration with its customers to develop solutions that are both...

  • Toolmakers - 2nd shift

    2 weeks ago

    Cleveland, United States Emerge Full time

    Job DescriptionJob DescriptionEmerge is currently recruiting qualified candidates for a direct-hire 2nd shift Tool and Die Maker Job in Cleveland, OH for our client, a growing manufacturer of quality aerospace products. The Tool and Die Maker is responsible for the mechanical construction of molds and dies. Candidates must have five (5) or more years of...

  • Toolmakers - 2nd shift

    4 weeks ago

    Cleveland, United States Emerge Full time

    Job DescriptionJob DescriptionEmerge is currently recruiting qualified candidates for a direct-hire 2nd shift Tool and Die Maker Job in Cleveland, OH for our client, a growing manufacturer of quality aerospace products. The Tool and Die Maker is responsible for the mechanical construction of molds and dies. Candidates must have five (5) or more years of...

  • Tool & Die Designer

    2 weeks ago

    Cleveland, United States Bula Forge & Machine Full time

    Job DescriptionJob DescriptionBula Forge & Machine is a Cleveland-based manufacturing company seeking productive, highly motivated, and energetic Tool & Die Designer to join our team. Candidates must have an exceptional attitude, strong work ethic, and potential for advancement.Job Requirements:Design tooling & fixturesAdvanced in SolidworksAdvanced in...

  • Tool & Die Maker

    2 weeks ago

    Cleveland, United States Crucial Link Group Full time

    Job DescriptionJob DescriptionTitle: Tool & Die MakerType: Full-timeSalary: Up to $28, based on experienceShift: 1st shift M-F (6am – 2:30pm or 7am-3:30pm)OT: Available during week and on Saturdays but is not required Work Performed:Operate typical tool room machines such as: engine lathe, vertical and horizontal milling machines, surface and pedestal...

  • Tool & Die Maker

    4 weeks ago

    Cleveland, United States Crucial Link Group Full time

    Job DescriptionJob DescriptionTitle: Tool & Die MakerType: Full-timeSalary: Up to $28, based on experienceShift: 1st shift M-F (6am – 2:30pm or 7am-3:30pm)OT: Available during week and on Saturdays but is not required Work Performed:Operate typical tool room machines such as: engine lathe, vertical and horizontal milling machines, surface and pedestal...

  • Tool and Die Maker

    2 weeks ago

    Cleveland, United States Crucial Link Group Full time

    Job DescriptionJob DescriptionCrucial Link is hiring Tool and Die Maker in Cleveland, 44135!Pay Rate: $20-25/hr depending on experience.Monday – Friday 6:00am – 2:30pm, occasional OTABSOLUTELY NO Criminal History MINIMUM 5 years of experience in Tool and Die Making REQUIRED Preferred: Journeyman Tool and Die Maker or Certified Tool and Die MakerTemp to...

  • Tool and Die Maker

    4 weeks ago

    Cleveland, United States Crucial Link Group Full time

    Job DescriptionJob DescriptionCrucial Link is hiring Tool and Die Maker in Cleveland, 44135!Pay Rate: $20-25/hr depending on experience.Monday – Friday 6:00am – 2:30pm, occasional OTABSOLUTELY NO Criminal History MINIMUM 5 years of experience in Tool and Die Making REQUIRED Preferred: Journeyman Tool and Die Maker or Certified Tool and Die MakerTemp to...

  • Tool and Die Maker

    2 weeks ago

    Cleveland, Ohio, United States Aspirant RPO LLC Full time

    Howmet Aerospace is a global leader in engineered metal products, driving innovation in the aerospace industry. We specialize in precision engineering and advanced manufacturing techniques to produce high-performance components for aircraft and industrial gas turbines.This position is responsible for the mechanical construction of molds and dies using...

  • Tool and Die Maker

    2 weeks ago

    Cleveland, United States Aspirant RPO LLC Full time $30 - $40

    Howmet Aerospace is a global leader in engineered metal products, driving innovation in the aerospace industry. We specialize in precision engineering and advanced manufacturing techniques to produce high-performance components for aircraft and industrial gas turbines.This position is responsible for the mechanical construction of molds and dies using...