Mill Machinist Level II

2 months ago


Houston, United States G&H Diversified Manufacturing LP Full time
Job DescriptionJob DescriptionDescription:

Responsibilities

  • Proficiently setup and operate HAAS vertical, HAAS horizontal, 4th axis Fanuc control mill.
  • Make control panel program edits as needed.
  • Using a variety of hand measuring tools, inspect work completed and document results, ensuring results meet engineering or customer requirements.
  • Ability to work through multiple setups and machining operations to deliver a finished product.
  • Ensure proper tooling and programs are used, as well as make adjustments to the machine and tooling as required.
  • Read dimensions and tooling instructions from work orders and drawings/blueprints.
  • Perform machine set-up by ensuring proper programs, tooling and offsets are used.
  • Load and unload raw material and parts, ensuring proper part alignment and positioning using part holding clamps, jaws, and chucks.
  • Monitor machine operation to detect malfunction or out-of-tolerance operations and adjust machine controls as required.
  • Verify machine calibration and settings by measuring parts against drawings, using micrometers (ID and OD), dial calipers, and dial indicators.
  • Produce consistent, quality parts within tolerances of ± .001"
  • Machine operators are responsible for fit, finish, and cleaning of each part produced.
  • Follows safety guidelines and procedures established by the company.
  • Be able to calculate dimensions and tolerances using knowledge of mathematics and instruments such as micrometers and/or calipers
  • Machining parts to print/customer specifications
  • Be able to identify non-conforming parts using precision measuring instruments
  • Must be able to set tooling and apply offsets
  • Using tooling and material data the employee must be able to calculate surface footage to machine components
  • Perform all other duties assigned by supervisor.
Requirements:

Requirements

  • Minimum of 2 years’ experience operating CNC mills.
  • Demonstrated competency with reading and interpreting engineering drawings, specifications, and sample parts, for the purpose of developing a tooling and manufacturing plan to machine required part features.
  • Experience operating HAAS Fanuc control.
  • Ability to interpret geometric dimensions and tolerances.

  • Mill Machinist

    2 months ago


    Houston, United States AmeriTech Staffing, Inc. Full time

    Job DescriptionJob DescriptionSeeking a skilled and experienced Mill MachinistAs a Mill Machinist you will be responsible for set up, programming and running a lathe or mill machine within specification of customer requirements and technical drawings and blueprints with minimal supervision.RESPONSIBILITIES:• Read and interpret blueprints, drawings, and...

  • Mill Machinist

    2 months ago


    Houston, United States AmeriTech Staffing, Inc. Full time

    Job DescriptionJob DescriptionSeeking a skilled and experienced Mill MachinistAs a Mill Machinist you will be responsible for set up, programming and running a lathe or mill machine within specification of customer requirements and technical drawings and blueprints with minimal supervision.RESPONSIBILITIES:• Read and interpret blueprints, drawings, and...

  • Mill Machinist

    2 weeks ago


    Houston, United States AmeriTech Staffing, Inc. Full time

    Job DescriptionJob DescriptionSeeking a skilled and experienced Mill MachinistAs a Mill Machinist you will be responsible for set up, programming and running a lathe or mill machine within specification of customer requirements and technical drawings and blueprints with minimal supervision.RESPONSIBILITIES:• Read and interpret blueprints, drawings, and...

  • Mill Machinist

    1 week ago


    Houston, United States AmeriTech Staffing, Inc. Full time

    Job DescriptionJob DescriptionSeeking a skilled and experienced Mill MachinistAs a Mill Machinist you will be responsible for set up, programming and running a lathe or mill machine within specification of customer requirements and technical drawings and blueprints with minimal supervision.RESPONSIBILITIES:• Read and interpret blueprints, drawings, and...

  • Manual Mill Machinist

    2 months ago


    Houston, United States AmeriTech Staffing, Inc. Full time

    Job DescriptionJob DescriptionManual Mill MachinistSeeking a skilled and experienced Manual Mill MachinistAs a Manual Mill Machinist you will be responsible for programming and operating manual mill machines to efficiently produce high quality parts according to specifications.RESPONSIBILITIES: • Interpret blueprints, drawings, work instructions to...

  • Manual Mill Machinist

    2 months ago


    Houston, United States AmeriTech Staffing, Inc. Full time

    Job DescriptionJob DescriptionManual Mill MachinistSeeking a skilled and experienced Manual Mill MachinistAs a Manual Mill Machinist you will be responsible for programming and operating manual mill machines to efficiently produce high quality parts according to specifications.RESPONSIBILITIES: • Interpret blueprints, drawings, work instructions to...

  • CNC Mill Machinist

    3 weeks ago


    Houston, United States Aerotek Full time

    **Description:**The CNC mill Machinist is responsible for the machining of new and repair part products to print specifications. The candidate will run either a CNC vertical Mazak Mill with Mazatrol controls (This machines smaller parts) OR CNC Johnford vertical mill with Fanuc controls. The specific machine is a Johnford but brand does not matter. SNK or...

  • CNC Mill Machinist

    1 week ago


    Houston, United States Aerotek Full time

    **Description:**The CNC mill Machinist is responsible for the machining of new and repair part products to print specifications. The candidate will run either a CNC vertical Mazak Mill with Mazatrol controls (This machines smaller parts) OR CNC Johnford vertical mill with Fanuc controls. The specific machine is a Johnford but brand does not matter. SNK or...

  • CNC Mill Machinist

    1 week ago


    Houston, United States Aerotek Full time

    **Description:** The CNC mill Machinist is responsible for the machining of new and repair part products to print specifications. The candidate will run either a CNC vertical Mazak Mill with Mazatrol controls (This machines smaller parts) OR CNC Johnford vertical mill with Fanuc controls. The specific machine is a Johnford but brand does not matter. SNK or...


  • Houston, United States Randstad North America, Inc. Full time

    . Will program basic 4th axis mill work . Operate more than one machine running when job mix permits . Produce at 100% of the routed rate . Will meet quality expectations of no more than one at fault NC - Rs per quarter . The essenti Mill Machinist, CNC, Lathe, Machinist, Manufacturing, Staffing

  • CNC Mill Machinist

    6 hours ago


    Houston, United States Aerotek Full time

    **Description:** The CNC mill Machinist is responsible for the machining of new and repair part products to print specifications. The candidate will run a CNC Johnford vertical mill with Fanuc controls. The specific machine is a Johnford but brand does not matter. SNK or HNK brands are most similiar. They could also run a Toshiba bp 150 HBM with Tosnoc...

  • CNC Mill Machinist

    3 weeks ago


    Houston, United States High Tech Machine Full time

    High Tech Machine wants you to become part of our highly talented and dedicated team.  For more than 25 years we have been providing reliable, quality machining and innovative, custom prototypes and solutions for Oil & Gas, Aerospace, Mining, Marine and other industries worldwide. This position is full-time and compensation is based on level of...

  • CNC Mill Machinist

    2 weeks ago


    Houston, United States High Tech Machine Full time

    High Tech Machine wants you to become part of our highly talented and dedicated team.  For more than 25 years we have been providing reliable, quality machining and innovative, custom prototypes and solutions for Oil & Gas, Aerospace, Mining, Marine and other industries worldwide. This position is full-time and compensation is based on level of...


  • Houston, United States G&H Diversified Manufacturing LP Full time

    Job DescriptionJob DescriptionDescription:ResponsibilitiesProficiently setup and operate HAAS vertical, HAAS horizontal, 4th axis Fanuc control mill.Make control panel program edits as needed.Using a variety of hand measuring tools, inspect work completed and document results, ensuring results meet engineering or customer requirements.Ability to work through...

  • 5 Axis Mill Machinist

    2 weeks ago


    Houston, United States Aerotek Full time

    **Aerotek is seeking a 5 Axis Mill Machinist** **Job Description:** Candidate will be the only machinist in a small valve company. They will be setting up the machine and editing programs daily. No programming needed but needs to be able to edit proficiently. They will be running a Doosan with Fanuc controls, model number DVF6500. Pay: $30-40/hr. 1st Shift...


  • Houston, United States Aerotek Full time

    Aerotek is seeking a 5 Axis Mill Machinist Job Description: Candidate will be the only machinist in a small valve company. They will be setting up the machine and editing programs daily. No programming needed but needs to be able to edit proficiently. They will be running a Doosan with Fanuc controls, model number DVF6500. Pay: $30-40/hr. 1st Shift...


  • Houston, United States Randstad Full time

    Randstad - JobID: cnc-lathe-mill-machinist_houston [Manufacturing / Laborer / Warehouse] Randstad is currently working with a reputable company to fill several Machinist positions. These are immediate openings and include permanent and temporary positions for full-time and part-time positions. Duties include operating equipment and/or second operation...

  • 5 Axis Mill Machinist

    2 weeks ago


    Houston, United States Aerotek Full time

    **Description:** Candidate will be the only machinist in a small valve company. Only about 5 people total in the shop right now, they will need to be the expert with this machine. They will besetting up the machine and editing programs daily. No programming needed but needs to be able to edit proficiently. They will be runing a Doosan with Fanuc controls,...


  • Houston, United States The Wellboss Company LLC Full time

    Job DescriptionJob DescriptionDescription:POSITION SUMMARY:The Setup Machinist Level 1 is responsible for accurately and efficiently setting up a CNC machine to run parts.ESSENTIAL FUNCTIONS/RESPONSIBILITIES:The Setup Machinist Level 1 is accountable for the following functions and responsibilities:Run basic programs.Report on correct production quantity as...


  • Houston, United States G&H Diversified Manufacturing LP Full time

    Job DescriptionJob DescriptionDescription:Lathe Machinist Level IIResponsibilities:Ability to set up and operate one or more of the following lathe types lathes. Mazak, Haas, Okuma, Mori. Mazatrol programming experience a plus.Ability to read and understand dimensional drawings and tolerances of parts.Perform all machine setups, produce first articles parts...