Production Assembler
1 week ago
DCX-CHOL Enterprises is a privately held American owned Small Business. We are made up of five vertically integrated manufacturing and assembly divisions, each with their own history, specializations and products. Each division compliments the other with their unique skills and products and at the same time, each work together as a vertically integrated team to provide the most cost effective, high-quality interconnect products to our customers on time.
SCB Division of DCX-CHOL Enterprises Inc. is seeking experienced Production Assemblers with the following qualifications:
POSITION DESCRIPTION:
With supervision, perform basic and routine assembly operations on components, and subassemblies in accordance with military, aerospace and or other assembly standards using visual aids and verbal written instructions.
RESPONSIBILITIES:
•Crimping techniques
•Solder/Crimp splicing
•Connector assembly
•Boot/Sleeving connectorization
•Contact loading
•Hardware connectorization
•Wire routing techniques
•Use of cable assembling hand and power tools such as heat guns, hand crimpers, screw drivers etc.
•Use of rulers and tape measure.
EXPERIENCE / KNOWLEDGE REQUIRED:
JOB QUALIFICATIONS / REQUIREMENTS:
•Cable/Harness Assembly in Aerospace and Military Applications
•Connector Assembly Experience in Commercial and Military Applications, Soldering Experience per MIL-STD-2000, IPC-610, IPC-620 and/or J-Std-001-Class 3.
•Ability to Read & Interpret Blueprints, Schematics, Traveler/Routers, Bills of Material & Wire Lists.
•Must be able to understand and follow verbal instructions and be detailed oriented.
•Maintain a clean, safe well organized work-station through routine housekeeping.
•Familiarity with continuous-improvement techniques.
•Good eyesight
•Excellent finger dexterity
•MIL-STD experience preferred
•IPC certification preferred
•NASA certification preferred
Job Safety Analysis:
Normal work time spent indoors
A neat and tidy personal appearance must be maintained;
repetitive hand movement
Occasional periods of high levels of physical exertion needed, this includes heavy
lifting (50+ lb.), walking, bending, pushing large loads, carrying, stooping, reaching, etc.
ITAR REQUIREMENTS:
To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
DCX-CHOL Enterprises Inc. is an Equal Opportunity Employer; employment with DCX-CHOL Enterprises Inc. is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
DCX-CHOL Enterprises Inc. will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee’s Form I-9 to confirm work authorization via E-Verify.
-
Production Assembler
7 days ago
Los Angeles, United States DCX-CHOL Enterprises, Inc. Full timeDCX-CHOL Enterprises is a privately held American owned Small Business. We are made up of five vertically integrated manufacturing and assembly divisions, each with their own history, specializations and products. Each division compliments the other with their unique skills and products and at the same time, each work together as a vertically integrated team...
-
Mechanical Assembler
2 weeks ago
Los Angeles, United States Express Employment Professionals Full timeJob DescriptionJob DescriptionExpress Employment Professionals is a full-service staffing agencyOur client in Chatsworth is looking for:A mechanical assembler with 2-3 years of experience typically works in manufacturing or production settings, where they are responsible for assembling mechanical components and products. Here are some key aspects of the...
-
Entry Level Assembler
1 week ago
Los Angeles, United States Temptron Eng. Inc. Full timeJob DescriptionJob DescriptionTemptron Engineering is seeking a small parts production Assembler in the aerospace industry, looking for energetic full time employees to become an integral part of our team! You will perform assembly tasks as well as identify areas of improvement to increase efficiency. We are willing to train the right candidates for long...
-
Electromechanical Assembler Technician
2 weeks ago
Los Angeles, United States TCWGlobal Full timeJob DescriptionJob DescriptionElectromechanical Quality Assembly TechnicianTemp-To-Hire OpportunityOnsite in Chatsworth, CA 91311M-F, 7am-3:30pmPayrate: $21.63/hrWeekly pay and Benefits!Our leading software development client is hiring an Electromechanical Quality Assembly Technician to join their team in Chatsworth, CA! This is a great opportunity for...
-
Assembly / Manufacturing Associate
Found in: Appcast US C2 - 6 days ago
Los Angeles, United States Amtec Inc. Full timeWork Schedule: 7:00 am - 3:30 pm; M-FResponsibilitiesEssential functions of the position include, but are not limited to:Works assembling connectors per Blue prints and verifying processSetup and run wire marking machines per blue prints and verify qualityPositions parts to be assembled by following blue prints and Standard Work Instructions. Works at...
-
Assembly / Manufacturing Associate
Found in: Appcast Linkedin GBL C2 - 7 days ago
Los Angeles, United States Amtec Inc. Full timeWork Schedule: 7:00 am - 3:30 pm; M-FResponsibilitiesEssential functions of the position include, but are not limited to:Works assembling connectors per Blue prints and verifying processSetup and run wire marking machines per blue prints and verify qualityPositions parts to be assembled by following blue prints and Standard Work Instructions. Works at...
-
Final Assembly Electrical Technician
2 weeks ago
Los Angeles, United States California Temp Services, Inc Full timeJob DescriptionJob DescriptionJob descriptionAs an Assembly Technician, you will fabricate and assemble various components and products. This is a hands-on role that requires mechanical knowledge and proficiency with hand tools, power tools, and other equipment. If you have experience in a warehouse environment and possess strong attention to detail, we...
-
Assembly Worker
1 week ago
Los Angeles, United States Marine Biology & Environmental Technologies, LLC Full timeJob DescriptionJob DescriptionLight assembly work, some lifting of product (under 20lbs) and work area cleaning. Part-time to start, work hours may vary slightly, with expected ability to transition to full time. No experience is necessary, we will train.
-
Sheet Metal Assembly Technician
1 week ago
Los Angeles, United States California Temp Services, Inc Full timeJob DescriptionJob DescriptionSheet Metal Assembly Job descriptionAs a Sheet Metal Assembly Technician, you will fabricate, assemble, and install sheet metal products. This hands-on role requires Assembly knowledge and proficiency with power and hand tools. If you have experience in sheet metal fabrication and are looking for a challenging and rewarding...
-
Electromechanical Quality Assembly Technician
2 weeks ago
Los Angeles, United States TCWGlobal Full timeJob DescriptionJob DescriptionElectromechanical Quality Assembly TechnicianTemp-To-Hire OpportunityOnsite in Chatsworth, CA 91311M-F, 7am-3:30pmPayrate: $21.63/hrWeekly pay and Benefits! Our leading software development client is hiring an Electromechanical Quality Assembly Technician to join their team in Chatsworth, CA! The electromechanical Quality...
-
Assembly / Manufacturing Associate
1 week ago
Los Angeles, United States Amtec Contract Full timeJob DescriptionJob DescriptionWork Schedule: 7:00 am - 3:30 pm; M-FResponsibilitiesEssential functions of the position include, but are not limited to:Works assembling connectors per Blue prints and verifying processSetup and run wire marking machines per blue prints and verify qualityPositions parts to be assembled by following blue prints and Standard Work...
-
Final Assembly Electrical Technician/Tester
1 week ago
Los Angeles, United States California Temp Services, Inc Full timeJob DescriptionJob DescriptionFinal Assembly/Tester Job descriptionAs an Assembly Technician, you will fabricate and assemble various components and products. This is a hands-on role that requires mechanical knowledge and proficiency with hand tools, power tools, and other equipment. If you have experience in a warehouse environment and possess strong...
-
Director, Assembly Process
Found in: Talent US C2 - 1 week ago
Los Angeles, United States Gate Gourmet Full timeWe’re looking for motivated, engaged people to help make everyone’s journeys better. This role is to provide overall leadership and tactical (strategic) direction for the Assembly processes/department within the Gate Gourmet Hub operations. The Individual is a strong leader with strong People management skills. This role is predominantly concentrated...
-
Assembly & Support Technician
1 week ago
Los Gatos, United States Vision Products LLC Full timeJob DescriptionJob DescriptionAt Vision Products, LLC, we specialize in the design, development and manufacturing of complex, state-of-the-art display systems for military and commercial applications. Our products and technologies include Head or Helmet Mounted Displays, and other human-machine interface devices.Job descriptionWe are looking for an Assembly...
-
Production Employee II
1 week ago
Los Angeles, United States Pacific Spice Company Full timeJob DescriptionJob DescriptionJob SummaryThe Production Employee II will be responsible for specialized production tasks in Processing, Blending and Packing or may have generalized role working in all departments. Responsibilities include keeping the production area clean, preparing and operating machinery and equipment for use, working the production line...
-
Assembler 1
2 days ago
Los Alamitos, United States APPLIED COMPOSITES INC Full timeApplied Composites (AC) is seeking a **Production Assembler 1 **to perform a range of routine assembly operations of small parts or components, under well-defined instructions and in accordance with company policy and safety procedures. This individual uses light powered electrical or mechanical tools, including hand tools, in the construction of...
-
Los Gatos, United States Vision Products LLC Full timeJob DescriptionJob DescriptionAt Vision Products, LLC, we specialize in the design, development and manufacturing of complex, state-of-the-art display systems for military and commercial applications. Our products and technologies include Head or Helmet-Mounted Displays (HMD) and other human-machine interface devices.Job descriptionWe are looking for an...
-
Product Management Internship
7 days ago
Los Angeles, United States Machina Labs Full timeCompany Machina Labs is on a mission to build the factory of the futurea factory where designers and engineers rapidly iterate on physical products and scale out production on demand. We began our journey in 2019 and since then have been backed by major AI and Deep Tech investors (like Innovation Endeavors and Lockheed Martin Ventures), and we count NASA,...
-
Head Of Product Development and Manufacturing
Found in: Jooble US O C2 - 7 days ago
Los Angeles, CA, United States 3DEO Full timeChief Executive Officer 3DEO, one of the world’s highest volume metal 3D printing companies, was founded on the vision to become the premier additive manufacturing (AM) service to successfully combine mass production metal 3D printing capabilities with multi-disciplinary design and product development expertise. As innovators ourselves, 3DEO is one of...
-
Director of Mechanical Engineering
Found in: Appcast US C2 - 1 week ago
Los Angeles, United States 3DEO Full timeReporting to: Chief Executive OfficerLocation: Torrance, CAAbout 3DEO3DEO, one of the world’s highest volume metal 3D printing companies, was founded on the vision to become the premier additive manufacturing (AM) service to successfully combine mass production metal 3D printing capabilities with multi-disciplinary design and product development...