See more Collapse

CNC Operator- Set Up

1 month ago

Rochester, United States Mcalpin Industries Inc Full time
Job DescriptionJob DescriptionDescription:

General Job Summary:

This position involves all phases of the laser turret combo operation, including tool building, repair, set-up and operation to complete sheet metal production per work instructions/blueprint specifications.


Essential Duties and Responsibilities:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions.

  • Refers to production control document/blueprint for job specifics.
  • Builds and repairs tools per job specifications.
  • Sets up machine to run job.
  • Installs and removes required tools for job.
  • Loads sheet metal on machine.
  • Runs program and observes operation.
  • May make minor adjustments in the computer program as necessary.
  • Unloads finished pieces and inspects per specifications of job.
  • De-burrs and buffs pieces as needed.
  • Assists with other duties as assigned by supervisor/ manager.


Supervisory Responsibilities:

None


Requirements:

Education

High school diploma or general education degree (GED)

One-year certificate from college or technical school preferred or equivalent combination of education and experience.

Experience

2-3 years related experience or training

Computer Skills:

Ability to use computer for operation purposes as well as understand use of CNC machine controller.

Other Requirements:

Ability to use calipers and micrometers, hand jacks and grinders. Ability to read blueprints. Knowledge of CNC. Ability to program is a plus.

Language Skills:

Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or Associates of organization.

Mathematical Skills:

Basic Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.

Reasoning Ability:

Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.

Physical Demands:

The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job the Associate is regularly required to stand; walk; sit; maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasping and twisting; talk or hear; lift and/or move equipment/product weighing up to 50 pounds. Work with another associate to lift anything greater than 50lbs

Work Environment:

The work environment characteristics described here are representative of those Associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment.

While performing the duties of this job the Associate is regularly exposed to extreme heat; extreme cold; wet and/or humid conditions. While performing the duties of this job the noise level in the work environment is usually loud.


We have other current jobs related to this field that you can find below

  • CNC Mill Set-Up Operator

    2 months ago

    Rochester, United States DJ Acquisition Management Corp Full time

    Job DescriptionJob DescriptionDescription: Weco is a value-added single-source contract manufacturer of machined components, finished fabricated sheet metal, and assembled metal products. Our three facilities encompass all aspects of metal product manufacturing including our own on-site finishing with powder, paint, and graphics capability. We serve the OEM...

  • CNC Lathe Set-Up and Operate

    2 weeks ago

    Rochester, United States American Machining Technologies, LLC Full time

    Job DescriptionJob DescriptionLooking for a candidate with 3 - 5 years experience in a Manufacturing Environment willing to operate a CNC Lathe.Looking for someone who is is willing to learn and work.This job will mostly be spent setting up and running CNC lathes. We are a small shop so there will be other duties.Other duties would include: helping inspect...

  • CNC Machine Set-up I

    2 months ago

    Rochester, United States SigSauer Full time

    Job DescriptionJob DescriptionCNC Machine Set-up1st Shift Monday - Thursday 10hrsSIG SAUER, Inc. is a leading provider and manufacturer of firearms, electro-optics, ammunition, airguns, suppressors, remote controlled weapons stations, and training. For over 250 years SIG SAUER, Inc. has evolved, and thrived, by blending American ingenuity, German...

  • CNC Operator- Set Up

    2 months ago

    Rochester, United States Mcalpin Industries Inc Full time

    Job DescriptionJob DescriptionDescription:General Job Summary:This position involves all phases of the laser turret combo operation, including tool building, repair, set-up and operation to complete sheet metal production per work instructions/blueprint specifications.Essential Duties and Responsibilities:To perform this job successfully, an individual must...

  • Cnc router operator

    5 days ago

    Rochester, United States Randstad Full time

    We are seeking a CNC operator for our Router Operator opening due to expansion and growth within our Rochester location. As a CNC Router operator, you will be responsible for preparing and operating a router machine for a variety of part construction and geometry. Operators must be able to select cutting tools, tool paths, cutting speeds and feed rates...

  • CNC Machine Operators

    4 weeks ago

    Rochester, United States NESCO Inc Full time

    CNC Machine Operators CNC Setup – 1st shift, $25 - $35, BOE:  This role requires Multi-Axis Live Tooling Lathe and Okuma experience. CNC Setup – 2nd shift, $23 - $26, BOE:  Looking for both Mill and Lathe experience. Summary The CNC Setup receives daily direction from the Department Supervisor. They are responsible for setting up the machine, getting...

  • CNC Operator III

    2 months ago

    Rochester, United States PGM Corporation Full time

    About the Organization PGM is a full service precision manufacturing corporation specializing in precision CNC machining, turning, grinding and assembly. Our volumes range from low to high with dedicated production lean cells for single piece flow to quick set up cells for families of parts or model shop programs. PGM has worked with every type of material...

  • CNC Operator III

    3 weeks ago

    Rochester, United States PGM Corporation Full time

    About the Organization PGM is a full service precision manufacturing corporation specializing in precision CNC machining, turning, grinding and assembly. Our volumes range from low to high with dedicated production lean cells for single piece flow to quick set up cells for families of parts or model shop programs. PGM has worked with every type of material...

  • CNC Router Operator

    5 days ago

    Rochester, United States Randstad North America, Inc. Full time

    We are seeking a CNC operator for our Router Operator opening due to expansion and growth within our Rochester location. As a CNC Router operator, you will be responsible for preparing and operating a router machine for a variety of part construction Operator, CNC, CNC Operator, Manufacturing, Staffing, Program

  • CNC Operator III

    2 months ago

    Rochester, United States PGM Corporation Full time

    About the Organization PGM is a full service precision manufacturing corporation specializing in precision CNC machining, turning, grinding and assembly. Our volumes range from low to high with dedicated production lean cells for single piece flow to quick set up cells for families of parts or model shop programs. PGM has worked with every type of material...

  • CNC Blanking Operator

    2 months ago

    Rochester, United States Imagine Staffing Technology Full time

    Job DescriptionJob DescriptionJob ProfileJob TitleCNC Blanking Operator/Set Up (2nd Shift)LocationRochester, NYHire TypeContract HireSalary$20 - $25/hour + $1.50 Shift DifferentialWork ModelOnsiteContact Phone(716) 256-1270Contact Emailsdisalvo@imaginestaffing.net Nature & Scope:Positional Overview Imagine Staffing is recruiting for a CNC Blanking Operator...

  • CNC Blanking Operator

    2 months ago

    Rochester, United States Imagine Staffing Technology Full time

    Job DescriptionJob DescriptionJob ProfileJob TitleCNC Blanking Operator/Set Up (2nd Shift)LocationRochester, NYHire TypeContract HireSalary$20 - $25/hour + $1.50 Shift DifferentialWork ModelOnsiteContact Phone(716) 256-1270Contact Emailsdisalvo@imaginestaffing.net Nature & Scope:Positional Overview Imagine Staffing is recruiting for a CNC Blanking Operator...

  • CNC Machinist

    7 days ago

    Rochester, United States Sydor Optics Inc. Full time

    Job DescriptionJob DescriptionSydor Optics, Inc. is a Rochester based manufacturing company fabricating flat-surfaced, precision optics for over 50 years. Our manufacturing facility is in Chili, NY just west of the Rochester International Airport. Our Sales Team works closely with customers to assist them with custom requests for a variety of markets ranging...

  • CNC Machinist

    2 months ago

    Rochester, United States FactoryFix Full time

    CNC Machinist Job DescriptionWe are currently seeking a skilled CNC Machinist to join our team at our facility located in Rochester, NY, 14611. As a CNC Machinist, you will be responsible for operating and maintaining CNC machines to produce high-quality parts according to specifications.Responsibilities: Read and interpret blueprints to determine machining...

  • CNC Machine Operator

    2 weeks ago

    Rochester, United States SigSauer Full time

    Job DescriptionJob DescriptionCNC Machine Operator 1st ShiftSIG SAUER, Inc. is a leading provider and manufacturer of firearms, electro-optics, ammunition, air guns, suppressors, remote controlled weapons stations, and training. For over 250 years SIG SAUER, Inc. has evolved, and thrived, by blending American ingenuity, German engineering, and Swiss...

  • CNC Machine Operator

    2 days ago

    Rochester, United States SigSauer Full time

    Job DescriptionJob DescriptionCNC Machine Operator2nd ShiftSIG SAUER, Inc. is a leading provider and manufacturer of firearms, electro-optics, ammunition, air guns, suppressors, remote controlled weapons stations, and training. For over 250 years SIG SAUER, Inc. has evolved, and thrived, by blending American ingenuity, German engineering, and Swiss...

  • CNC Machine Operator

    4 weeks ago

    Rochester, United States SigSauer Full time

    Job DescriptionJob DescriptionCNC Machine Operator 2nd ShiftSIG SAUER, Inc. is a leading provider and manufacturer of firearms, electro-optics, ammunition, air guns, suppressors, remote controlled weapons stations, and training. For over 250 years SIG SAUER, Inc. has evolved, and thrived, by blending American ingenuity, German engineering, and Swiss...

  • CNC Machine Operator

    2 weeks ago

    Rochester, United States SigSauer Full time

    Job DescriptionJob DescriptionCNC Machine Operator 1st ShiftSIG SAUER, Inc. is a leading provider and manufacturer of firearms, electro-optics, ammunition, air guns, suppressors, remote controlled weapons stations, and training. For over 250 years SIG SAUER, Inc. has evolved, and thrived, by blending American ingenuity, German engineering, and Swiss...

  • CNC Programmer

    2 months ago

    Rochester Hills, United States Spark Talent Inc Full time

    Job DescriptionJob DescriptionCNC Setup Machinist - DIRECT HIRE - $20-$30 PER HOUR 2ND AND 3RD SHIFT!About the CompanySpark Talent Acquisition is a Michigan-headquartered recruiting and staffing company that connects great talent with great employers. We understand that finding a new position can be stressful and identifying top talent can be challenging....

  • CNC Programmer

    2 months ago

    Rochester Hills, United States Spark Talent Inc Full time

    Job DescriptionJob DescriptionCNC Setup Machinist - DIRECT HIRE - $20-$30 PER HOUR 2ND AND 3RD SHIFT!About the CompanySpark Talent Acquisition is a Michigan-headquartered recruiting and staffing company that connects great talent with great employers. We understand that finding a new position can be stressful and identifying top talent can be challenging....