CAD Designer

4 weeks ago

Denver, United States Huber Technology Inc Full time
Job DescriptionJob Description
  1. JOB SUMMARY
  • Under the supervision of CAD Manager, employee is responsible for a variety of design/drafting activities including assisting with the preparation of and/or updating of installation drawings for projects, and assisting or preparing assembly/manufacturing drawings as requested. Other duties may be assigned.

  1. ESSENTIAL DUTIES AND RESPONSIBILITIES
  • Prepare dimensional drawings, installation drawings, and a variety of more complex drawings (plant engineering)
  • Revise and update existing drawings reflecting design changes, in collaboration with the HSE Germany headquarters office to ensure consistent documentation of the project
  • Review and understand blueprints, plans, specifications, and other customer documentation requested as needed by engineers or project managers
  • Revise and update drawings from HSE Germany headquarters for NC manufacturing / assembly floor to ensure consistent documentation of the project
  • Assist and/or prepare installation drawings, which meet and exceed the customer’s requirements (bid and submittal phase). Implement these requirements on drawings sent to the customer.
  • Become an information source on planning and design of equipment installations: equipment and plant engineering with on the job training and experience.
  • Maintain notes, design calculations and other documentation (like drawings, bill of materials, list of design parameters, and /performance guarantees) for future reference as to established procedures by the CAD team.
  • Other duties as required relating to CAD database maintenance, PDM, etc.
  • Performs other work-related duties as assigned.

  1. SUPERVISORY RESPONSIBILITIES

This position has no supervision responsibilities.

  1. WORK ENVIRONMENT
  • While performing the duties of this job, the employee regularly works in an office setting.
  • Occasional visits to customer sites may be required.
  • Occasionally perform work in the manufacturing facility (dust and noise may be present)
  • Training will take place in Germany

  1. PHYSICAL DEMANDS

The physical demands described here are representative of those to be met by an employee to successfully perform the essential functions of this job.

  • The 3D CAD Technician must be able to concentrate for extended periods paying close attention to detail. The 3D CAD Technician’s work environment does not require much physical movement. While performing the duties of this job, the employee is regularly required to sit or stand if that is preference.
  • Specific vision abilities required by this job include close vision, distance vision, color vision, and ability to adjust focus.
  • Consistent attendance is important to this role, to meet bid dates, and manufacturing deadlines dependent on the drawings and commitments to our vendors and customers.

  1. POSITION TYPE/EXPECTED HOURS OF WORK

This is a Full-Time position. Standard days and hours of work are Monday – Friday, 8 to 5pm.

  1. TRAVEL
  • Must have passport, or ability to obtain passport upon date of hire. Initial training will take place in Germany.
  • Annual or bi-annual training in Germany
  • Limited travel required to visit customer sites or tradeshows.

  1. EDUCATION, EXPERIENCE, AND SKILLS

Required Qualifications

  • Associate's degree or completion of a technical trade school in CAD, drafting or related field, plus at least 4-6 years of related work experience: or any equivalent combination of experience and training that provides the required knowledge, skills and abilities.
  • Part modeling and detailing experience using Creo/ProEngineer 2.0-6.0 parametric software
    • Experience working with skeleton structures, assembly structures, and product design
  • Experience in equipment layout for municipal and/or industrial construction projects
  • Experience in equipment/plant layout relating to wastewater treatment facilities
  • Experience with Windchill Product Data Management (PDM) software
  • Manufacturing design experience with sheet metal, fabrication, and welding CAD designs
  • Ability and willingness to travel to Germany up to twice per year

Preferred Qualifications

  • Experience with IFS software or similar experience with SAP software
  • 6-8 years of experience

Pre-Hire: Ability to pass a drug test, background check as it relates to the role, and completion of an I-9 form. HUBER is an E-Verify Employer. Authorization to work in the U.S. is a precondition of employment for this role. No relocation - Local candidates only

  • CAD Designer

    4 weeks ago

    Denver, United States ESS Metron Full time

    Do you enjoy being part of an electrifying team? Would you enjoy working closely with a strong team to design and program custom CAD/CAM designs?Join our CAD Design Team! Designing custom programs to ensure that our machine operators can cut, punch, and bend sheet metal into parts to meet the needs of our customers and industry. Collaborating as a team, the...

  • CAD Designer

    4 weeks ago

    Denver, United States ESS Metron Full time

    **Do you enjoy being part of an electrifying team? ** Would you enjoy working closely with a strong team to design and program custom CAD/CAM designs? Join our CAD Design Team! Designing custom programs to ensure that our machine operators can cut, punch, and bend sheet metal into parts to meet the needs of our customers and industry. Collaborating as a...

  • CAD Designer

    3 weeks ago

    Denver, Colorado, United States ESS Metron Full time

    **Do you enjoy being part of an electrifying team?** Would you enjoy working closely with a strong team to design and program custom CAD/CAM designs?Join our CAD Design TeamDesigning custom programs to ensure that our machine operators can cut, punch, and bend sheet metal into parts to meet the needs of our customers and industry. Collaborating as a team,...

  • CAD Designer

    4 weeks ago

    Denver, Colorado, United States ESS Metron Full time

    **Do you enjoy being part of an electrifying team?** Would you enjoy working closely with a strong team to design and program custom CAD/CAM designs?Join our CAD Design TeamDesigning custom programs to ensure that our machine operators can cut, punch, and bend sheet metal into parts to meet the needs of our customers and industry. Collaborating as a team,...

  • CAD Designer

    3 weeks ago

    Denver, United States Huber Technology Inc Full time

    Job DescriptionJob DescriptionJOB SUMMARYUnder the supervision of CAD Manager, employee is responsible for a variety of design/drafting activities including assisting with the preparation of and/or updating of installation drawings for projects, and assisting or preparing assembly/manufacturing drawings as requested. Other duties may be assigned. ESSENTIAL...

  • CAD/BIM Designer

    4 weeks ago

    Denver, United States Hazen and Sawyer Full time

    Job DescriptionJob DescriptionHazen and Sawyer is seeking a process mechanical CAD/BIM Designer based in Denver to work alongside staff Engineers and Senior CAD Designers, in the design and production of contract documents for various Water, Wastewater, Pump Station, and Pipeline projects. Position responsibilities will include:Prepare site plans, plans,...

  • CAD/BIM Designer

    2 months ago

    Denver, United States Hazen and Sawyer Full time

    Job DescriptionJob DescriptionHazen and Sawyer is seeking a process mechanical CAD/BIM Designer based in Denver to work alongside staff Engineers and Senior CAD Designers, in the design and production of contract documents for various Water, Wastewater, Pump Station, and Pipeline projects. Position responsibilities will include:Prepare site plans, plans,...

  • CAD/BIM Designer

    3 weeks ago

    Denver, United States Hazen and Sawyer Full time

    Job DescriptionJob DescriptionHazen and Sawyer is seeking a process mechanical CAD/BIM Designer based in Denver to work alongside staff Engineers and Senior CAD Designers, in the design and production of contract documents for various Water, Wastewater, Pump Station, and Pipeline projects. Position responsibilities will include:Prepare site plans, plans,...

  • CAD Design Engineer

    1 month ago

    Denver, United States OneTech Full time

    One Tech Engineering is searching for a CAD Design Engineer for a position located in Denver, Colorado. The CAD Design Engineer will be responsible for the design, modeling, development and testing of a machine, structure or system. The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should...

  • Senior CAD Designer

    1 month ago

    Denver, United States Kennedy Jenks Full time

    Kennedy Jenks is seeking a dynamic Senior Water/Wastewater Civil CAD Designer to join our multidisciplinary team. This person will be a part of the CAD Team and will work on the design and delivery of a variety of projects both locally and nationally. Key Responsibilities: In the role as Water/Wastewater CAD Designer you will use your site civil experience...

  • Senior CAD Designer

    3 weeks ago

    Denver, United States Kennedy Jenks Full time

    Kennedy Jenks is seeking a dynamic Senior Water/Wastewater Civil CAD Designer to join our multidisciplinary team. This person will be a part of the CAD Team and will work on the design and delivery of a variety of projects both locally and nationally.Key Responsibilities: In the role as Water/Wastewater CAD Designer you will use your site civil experience of...

  • CAD Lead Designer

    4 weeks ago

    Denver, United States Badlands Contracting, LLC Full time

    Job Summary: The CAD Lead Designer is a self-motivated individual with experience developing design documents for Oil and Gas surface facilities. Candidate will lead a team of designers to achieve safety, quality, cost and schedule metrics as well as overall client satisfaction. Candidate works with the Engineering staff to provide designs, plans, project...

  • CAD Lead Designer

    4 weeks ago

    Denver, United States Badlands Contracting, LLC Full time

    Job Summary: The CAD Lead Designer is a self-motivated individual with experience developing design documents for Oil and Gas surface facilities. Candidate will lead a team of designers to achieve safety, quality, cost and schedule metrics as well as overall client satisfaction. Candidate works with the Engineering staff to provide designs, plans, project...

  • CAD Lead Designer

    4 weeks ago

    Denver, United States Badlands Contracting, LLC Full time

    Job Summary: The CAD Lead Designer is a self-motivated individual with experience developing design documents for Oil and Gas surface facilities. Candidate will lead a team of designers to achieve safety, quality, cost and schedule metrics as well as overall client satisfaction. Candidate works with the Engineering staff to provide designs, plans, project...

  • Senior CAD Designer

    4 days ago

    Denver, Colorado, United States AECOM Full time

    Job DescriptionAECOMis seeking a telecommute Senior CAD Designer to be based in Spokane, Denver, Colorado; Oakland, California; or Sacramento, California.In this role you'll have the opportunity to lead work on a variety of projects including but not limited to: expansions of tailings facilities; conceptual designs of a spillway upgrade/retrofit alternative;...

  • CAD/CAM design technician

    4 weeks ago

    Denver, United States RESTORATIVE DENTISTRY GROUP Full time

    Job description Our full-service dental lab is looking for an experienced CAD/CAM design technician to scan, design and mill dental work orders according to prescription requests. We use the latest technologies in 3D printing and milling. Job Description: Read work prescriptions and examine cases to determine design of dental restoration Scan, design, and...

  • CAD/CAM design technician

    3 weeks ago

    Denver, United States RESTORATIVE DENTISTRY GROUP Full time

    Job descriptionOur full-service dental lab is looking for an experienced CAD/CAM design technician to scan, design and mill dental work orders according to prescription requests. We use the latest technologies in 3D printing and milling.Job Description:Read work prescriptions and examine cases to determine design of dental restorationScan, design, and...

  • CAD/CAM design technician

    1 month ago

    Denver, United States RESTORATIVE DENTISTRY GROUP Full time

    Job descriptionOur full-service dental lab is looking for an experienced CAD/CAM design technician to scan, design and mill dental work orders according to prescription requests. We use the latest technologies in 3D printing and milling.Job Description:Read work prescriptions and examine cases to determine design of dental restorationScan, design, and...

  • CAD/CAM design technician

    5 days ago

    Denver, Colorado, United States RESTORATIVE DENTISTRY GROUP Full time

    Job descriptionOur full-service dental lab is looking for an experienced CAD/CAM design technician to scan, design and mill dental work orders according to prescription requests. We use the latest technologies in 3D printing and milling.Job Description:Read work prescriptions and examine cases to determine design of dental restorationScan, design, and...

  • CAD/CAM design technician

    4 weeks ago

    Denver, United States RESTORATIVE DENTISTRY GROUP Full time

    Job descriptionOur full-service dental lab is looking for an experienced CAD/CAM design technician to scan, design and mill dental work orders according to prescription requests. We use the latest technologies in 3D printing and milling.Job Description:Read work prescriptions and examine cases to determine design of dental restorationScan, design, and...