Aerospace Maintenance Mechanic Level 4 | $28

3 weeks ago

Gardena, United States FLAG Solutions LLC Full time
Job DescriptionJob Description

Position Summary:

Level 4: Level 4 mechanics work under minimal supervision, is able to perform all levels of repair and maintenance; expert in troubleshooting any mechanical repair or rebuild, expert in electrical and electronic diagnostic as well as repair and rebuild. Able to fix all types of equipment in the facility, expert in all facility repairs issues. Leader in maintenance department able to lead low level maintenance team.

Primary Duties & Responsibilities:

  • Work safely under functional safety guidelines such as PPE and equipment interaction.
  • Mechanical-. Able to do any machine mechanical repair and or rebuild. Able to do any machine alignment such as spindle to spindle and y-axis. Pull and replace machine such as axis linear guides and ball screws. Able to rebuild/over haul any spindle including pulling out any integrated spindle motor stator. Able to work with complex NC machine such as CTV 250
  • Electrical & Electronic: Diagnose, locate and correct malfunctions of electrical & electronic system such as machine controls, recorders, servo/axis drives, servo motors, defective transformers, relays, contactors, fuses, sensors, etc.
  • As the senior maintenance staff of the department applies knowledge, skill, experience, and problem solving skills in the complete maintenance, test, repair, modification and rebuild of all production machinery and equipment
  • Help Supervisor or Manager with scheduling PM, reading report, diagrams and drawings
  • Plan, layout, and fabricate replacement parts for major rebuilding of precision machine tools where set up and operation to exacting tolerances is required
  • Plan methods required to maintain, test, repair, or modify various types of industrial electronic controls and systems.
  • Respond to repair request
  • Teaches subject matter to lower level mechanics though on the job training, demonstrations
  • Analyze and coordinate resolutions of technical problems or assist when solving problems including contacts outside own department as required. .
  • Interface with manufacturers on line tech support when needed
  • Recommend improved work methods and procedures, assist in training employs
  • Perform related work as required

Required Skills:

  • The ability to read and write English.
  • A high level competence in shop math such as working with fractions and decimals.
  • A high level knowledge of hand tools and mechanical application regarding nuts and bolts.
  • A high level knowledge of part holding methods and procedures.
  • A high level knowledge NC equipment, electrical and electronic controls
  • The ability to interact with computers and CNC controls at a high level
  • The ability to interact and troubleshoot hydraulic and pneumatic systems at high level
  • The ability to read electrical and machine drawings and diagrams at high level
  • The ability to perform complex Preventive Maintenance for all NC, lathes, etc. following equipment checklists and run a PM report with ball bar diagram
  • Ability to lead and instruct low level maintenance

Required Experience:

  • This position requires high level experience working with mechanical processes and methods
  • Experience and considerable knowledge of the methods, materials, and equipment used in the maintenance and repair of various types of NC, lathes, mills,, presses, etc.
  • Ability to analyze, rebuild, repair NC machinery and other types of equipment's
  • Ability to work effectively and establish good working relationships with other employees
  • Ability to solve practical problems and deal with a variety of concrete variables; ability to interpret a variety of instructions furnished in written, oral, diagram, or scheduled form.
  • Meet the physical and mental requirements as established in these job descriptions
  • 10-15 years' experience

Level of Education:

  • GED or High School diploma preferred but not required.
  • CNC maintenance training and certification
#ZRCompany DescriptionGreat long term opportunity to join a great HR teamCompany DescriptionGreat long term opportunity to join a great HR team

  • Aerospace Maintenance Mechanic Level 4 | $28

    3 weeks ago

    Gardena, United States FLAG Solutions LLC Full time

    Job DescriptionJob DescriptionPosition Summary:Level 4: Level 4 mechanics work under minimal supervision, is able to perform all levels of repair and maintenance; expert in troubleshooting any mechanical repair or rebuild, expert in electrical and electronic diagnostic as well as repair and rebuild. Able to fix all types of equipment in the facility, expert...

  • Aerospace Maintenance Mechanic Level 3 | $28

    3 weeks ago

    Gardena, United States FLAG Solutions LLC Full time

    Job DescriptionJob DescriptionLocation Profile: Located in Los Angeles California, we design and manufactures separable and permanent fluid fittings and installation tolling for aerospace and defense applications.Position Summary:Level Three: Level three mechanics work under minimal supervision to perform turret/spindle alignments, PM tasks such as trouble...

  • Aerospace Maintenance Mechanic Level 3 | $28

    3 weeks ago

    Gardena, United States FLAG Solutions LLC Full time

    Job DescriptionJob DescriptionLocation Profile: Located in Los Angeles California, we design and manufactures separable and permanent fluid fittings and installation tolling for aerospace and defense applications.Position Summary:Level Three: Level three mechanics work under minimal supervision to perform turret/spindle alignments, PM tasks such as trouble...

  • Mechanical Engineer

    1 month ago

    Gardena, United States Wipro Limited Full time

    We are looking to bring new Mechanical Engineering talent onto our project teams and contribute to the development of new world-changing technologies.Who are we?We are a team of engineers fabricators e-techs and technologists taking on the most ambitious and impactful projects we can get our hands on. We explicitly target hardware challenges and have...

  • Mechanical Engineer

    4 weeks ago

    Gardena, California, United States Wipro Limited Full time

    We are looking to bring new Mechanical Engineering talent onto our project teams and contribute to the development of new world-changing technologies.Who are we?We are a team of engineers fabricators e-techs and technologists taking on the most ambitious and impactful projects we can get our hands on. We explicitly target hardware challenges and have enabled...

  • Bench Mechanic

    2 weeks ago

    Gardena, United States Ducommun Incorporated Full time

    Job Description Bench Mechanic Work with general supervision, plans, lays out, fabricates, assembles, installs, and repairs sheet metal parts, equipment, and products by performing the following duties. Who are we? Founded in 1849, Ducommun is the oldest company in California. Starting as a hardware supply store during the California Gold Rush and...

  • Bench Mechanic

    4 weeks ago

    Gardena, United States Ducommun Full time

    Job DescriptionBench Mechanic Work with general supervision, plans, lays out, fabricates, assembles, installs, and repairs sheet metal parts, equipment, and products by performing the following duties. Who are we? Founded in 1849, Ducommun is the oldest company in California. Starting as a hardware supply store during the California Gold Rush and eventually...

  • Maintenance Assistant

    4 weeks ago

    Gardena, United States Binder Metal Products Full time

    Job DescriptionJob DescriptionPOSITION SUMMARY: This position is responsible for performing semiskilled and unskilled manual tasks related to the maintenance and repair of buildings and grounds, equipment and appliances.RESPONSIBILITIES:1. Install, repair, maintain and otherwise care for building, fixtures, equipment and grounds.2. Make minor repairs to and...

  • Bench Mechanic

    1 month ago

    Gardena, United States Ducommun Full time

    Job DescriptionBench Mechanic Work with general supervision, plans, lays out, fabricates, assembles, installs, and repairs sheet metal parts, equipment, and products by performing the following duties. Who are we? Founded in 1849, Ducommun is the oldest company in California. Starting as a hardware supply store during the California Gold Rush and eventually...

  • CNG/Diesel Mechanic

    23 hours ago

    GARDENA, United States Cleanstreet Full time

    Medium/ Heavy Equipment Mechanic CleanStreet is a leading provider of municipal street sweeping services throughout the State of California. The Company is looking for professional drivers who are committed to quality and courtesy. CleanStreet has be Mechanic, Diesel Mechanic, Repair, Skilled Trades, Maintenance, Driver

  • Glass Manufacturing Equipment Mechanic

    2 weeks ago

    Gardena, United States Cast Tempering, Inc Full time

    Job DescriptionJob Description**Company:** Cast Tempering, Inc.**Location:** 360 W Compton, Gardena CA 90248**About Us:**Cast Tempering is a leading manufacturer of high-quality glass products, specializing in manufacturing and tempering processes. We are committed to delivering excellence in every aspect of our operations, from product quality to customer...

  • Glass Manufacturing Equipment Mechanic

    2 weeks ago

    Gardena, United States Cast Tempering, Inc Full time

    Job DescriptionJob DescriptionBenefits:401(k) **Company:** Cast Tempering, Inc.**Location:** 360 W Compton, Gardena CA 90248**About Us:**Cast Tempering is a leading manufacturer of high-quality glass products, specializing in manufacturing and tempering processes. We are committed to delivering excellence in every aspect of our operations, from product...

  • Aerospace Lab Technician

    2 weeks ago

    Gardena, United States Flag Solutions Full time

    Job DescriptionJob DescriptionQualifications Under general supervision, must exercise knowledge to perform a variety of job duties relating to the proficient testing and determination of product conformance to specifications, ATP and drawing requirements including but not limited to: High School diploma or GED, and certificate from a technical school or...

  • General Helper 2nd Shift Temp to Hire

    3 weeks ago

    Gardena, United States Ducommun Full time

    General Helper Assist shop personnel with a variety of support tasks that are based on department placement. The following describes in general terms the purpose and scope of the position. Under direct supervision assists in various shop activities by performing the following duties. Who are we? Founded in 1849, Ducommun is the oldest company in...

  • General Helper 2nd Shift Temp to Hire

    3 weeks ago

    Gardena, United States Ducommun Incorporated Full time

    Job Description General Helper Assist shop personnel with a variety of support tasks that are based on department placement. The following describes in general terms the purpose and scope of the position. Under direct supervision assists in various shop activities by performing the following duties. Who are we? Founded in 1849, Ducommun is the oldest...

  • Painter

    2 weeks ago

    Gardena, United States Flag Solutions Full time

    Job DescriptionJob DescriptionOverview: We are seeking a skilled painter to join our aerospace company to ensure the facility maintains a clean, professional appearance. The ideal candidate will have experience in painting walls, doors, floors, and machines in an industrial setting.Responsibilities:Prepare surfaces for painting by cleaning, sanding, and...

  • CNC Machinist 2nd Shift

    2 weeks ago

    Gardena, United States Ducommun Full time

    CNC Machinist 2nd ShiftJob DescriptionThis position is responsible for setting up andoperating the CNC (Computer Numerical Controlled) Multi-Axis machines,Vertical/Gantry/Horizontal rotary (4th) axis mills, CC Lathes/Routersand/or 5 axis Core mills.Who are we?Founded in 1849, Ducommun is the oldest company in California. Starting as a hardware supply store...

  • CNC Machinist 2nd Shift

    1 month ago

    Gardena, United States Ducommun Full time

    CNC Machinist 2nd ShiftJob DescriptionThis position is responsible for setting up andoperating the CNC (Computer Numerical Controlled) Multi-Axis machines,Vertical/Gantry/Horizontal rotary (4th) axis mills, CC Lathes/Routersand/or 5 axis Core mills.Who are we?Founded in 1849, Ducommun is the oldest company in California. Starting as a hardware supply store...

  • CNC Machinist 2nd Shift

    2 weeks ago

    Gardena, United States Ducommun Full time

    CNC Machinist 2nd ShiftJob Description This position is responsible for setting up andoperating the CNC (Computer Numerical Controlled) Multi-Axis machines,Vertical/Gantry/Horizontal rotary (4th) axis mills, CC Lathes/Routersand/or 5 axis Core mills. Who are we? Founded in 1849, Ducommun is the oldest company in California. Starting as a hardware supply...

  • Maintenance Electrician

    1 week ago

    Gardena, United States Flag Solutions Full time

    Job DescriptionJob DescriptionQualifications:Electrician: There is only one level of electrician, but they are to be certified and able to complete tasks from low voltage, i.e. wiring a wall outlet to high voltage, i.e. wiring an 800 amp machine connectionExpected to work without supervision, demonstrating an ability to read blue prints, and perform work in...