Outside Machinist

2 weeks ago

Norfolk, United States Shipyard Staffing Full time
Job DescriptionJob Description

Shipyard Staffing is currently hiring for Outside Machinist for work in Newport News, VA.

Outside Machinist Job Description:

  • The Outside Machinist position is responsible for removing, installing, and testing main and auxiliary shipboard equipment including but not limited to: Main Reduction Gears (MRG), pumps, valves, hydraulic equipment, steam equipment, valves, propellers, bearings, etc. on maritime vessels including US Navy, Military Sealift Command, and commercial.
  • The work occurs in various stages of repair and modernization and requiring the ability to operate a wide variety of tools and machinery, and the ability to read and comprehend specifications and drawings.
  • The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard.

QUALIFICATIONS AND EXPERIENCE:

  • Must be able to comprehend instructions, drawings, and general correspondence.
  • Must have comprehensive understanding of ship repair terminology and ship compartment location nomenclature.
  • Must be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.)
  • Must be able to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action.
  • Must be able to work from Process Control Procedures (PCP).
  • Must be able to use precision measurement tools.
  • Must be able to effectively confer job related information to the structural supervisor and small groups, and provide technical guidance to Helpers and Improvers.
  • Must be able to interpret drawings, sketches, tech manuals, and user manuals to the extent necessary to remove, repair, and install equipment.
  • Must understand the NAVSEA standard items, especially 009-04 for tests, inspections, and check points; 009-23 for interferences; and 009-24 for blanking and match marks.
  • Must have a comprehensive understanding of Lock-out / Tag-out procedures.
  • Must understand laser alignment.
  • Must understand reverse indicator alignment procedures.
  • Must understand the proper and safe use and operation of the hand and power tools required to accomplish the work.
  • Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system and the metric system.
  • Six (6) years of machinist experience, two (2) of which in the maritime environment.

DUTIES AND RESPONSIBILITIES

  • Comply with OSHA standards and BAE best safety practices.
  • Arrive at the designated work site at the assigned time and end the shift as directed by the supervisor. 3. Work shifts and overtime as assigned.
  • Keep the work area clean and safe at all times, especially at the end of the shift.
  • Complete work assignments as scheduled and provide status of unfinished work for shift turnover.
  • Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor.
  • Comply with the Company’s “Non-Discrimination and Anti-Harassment Policy” which requires that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment.
  • Carry out instructions furnished in written, oral, or diagram form. Resolve unexpected events related to your assigned task in a professional manner.
  • Work Tasks Include:
  • Prepare a safe work area especially as it relates to fire prevention.
  • Coordinate work with other crafts to disconnect and remove equipment.
  • Compile as-found reports identifying the status of equipment prior to work.
  • Perform in-place valve repairs.
  • Write material take offs with adequate information for ordering.
  • Align equipment.
  • Participate in and report results of operational tests.
  • Write informative and coherent condition reports in accordance with NAVSEA Standard Item 009-01or other regulatory body standard specifications.
  • Direct and monitor the activities of assigned helpers or improvers.
  • Run and remove lines and leads as required to accomplish work and in accordance with OSHA and BAE safety standards.
  • Implement Lock-out Tag-out for work being performed.

EEO

Company DescriptionShipyard Staffing, LLC is one of the leading staffing firms for the Marine industry. Our talent ranges from unskilled labors, skilled tradesman, experienced professionals and college level management. Our dedicated staff has served our clients for many years adapting to changing cultures and economical impacts. We have the privilege to serve nationally known corporations such as General Dynamics, Huntington Ingalls Industries, and many small businesses. Shipyard Staffing is V3 certified and is designated a small business by the U.S. Small Business Administration. Three locations that serve the San Diego, Hampton Roads and Jacksonville Florida. EEOCompany DescriptionShipyard Staffing, LLC is one of the leading staffing firms for the Marine industry. Our talent ranges from unskilled labors, skilled tradesman, experienced professionals and college level management. Our dedicated staff has served our clients for many years adapting to changing cultures and economical impacts. We have the privilege to serve nationally known corporations such as General Dynamics, Huntington Ingalls Industries, and many small businesses. Shipyard Staffing is V3 certified and is designated a small business by the U.S. Small Business Administration. Three locations that serve the San Diego, Hampton Roads and Jacksonville Florida. EEO

  • Outside Machinist

    1 month ago

    Norfolk, United States Tidewater Staffing Remote Work Freelance Full time $20 - $30

    Tidewater Staffing is currently seeking Outside Machinists for work in various local shipyards!Job Description:The Outside Machinist must possess knowledge, skills and abilities to perform job operation/tasks on conventional and nuclear ships and submarines. The Outside Machinist must be assignable to any work center excluding nuclear and subsafe machinery....

  • Outside Machinist

    5 days ago

    Norfolk, United States Shipyard Staffing LLC Part time $17 - $27

    Shipyard Staffing is currently hiring for Outside Machinist for work in Norfolk and Newport News, VA>About the Job:The Outside Machinist position is responsible for the installation of propulsion machinery, sea valves, steering gear, anchor handling equipment, elevators, pumps, ventilation fans, cooling coils, refrigeration units, compressors, weapons...

  • Outside Machinist

    7 days ago

    Norfolk, United States Shipyard Staffing LLC Full time

    Shipyard Staffing is currently hiring for Outside Machinist for work in Norfolk and Newport News, VA>About the Job:The Outside Machinist position is responsible for the installation of propulsion machinery, sea valves, steering gear, anchor handling equipment, elevators, pumps, ventilation fans, cooling coils, refrigeration units, compressors, weapons...

  • Outside Machinist

    6 days ago

    Norfolk, United States Aerotek Full time

    ***OUTSIDE MACHINIST NEEDED*****?** **Description:**+ 3 years of experience as an Outside Machinist/Diesel Mechanic+ Diesel engine repairs, rebuilds, and overhauls+ Assist in tearing down, repairing, replacing, and installing reduction gears+ repair deck equipment and machinery+ experience with pumps, valves, blueprints+ propelling machinery and auxiliary...

  • Outside Machinist

    6 days ago

    Norfolk, United States Walashek Full time

    The Outside Machinist position is responsible for the installation of propulsion machinery, sea valves, steering gear, anchor handling equipment, elevators, pumps, ventilation fans, cooling coils, refrigeration units, compressors, weapons systems, remote operators, radars, and antennas. In the process of installing this equipment, experience is gained in the...

  • Outside Machinist

    6 days ago

    Norfolk, United States Walashek Full time

    The Outside Machinist position is responsible for the installation of propulsion machinery, sea valves, steering gear, anchor handling equipment, elevators, pumps, ventilation fans, cooling coils, refrigeration units, compressors, weapons systems, remote operators, radars, and antennas. In the process of installing this equipment, experience is gained in the...

  • OUTSIDE Machinist Diesel Mechanic

    4 days ago

    Norfolk, United States Aerotek Full time

    **Description:**Will be responsible for:-conducting diesel engine repairs, rebuilds, and overhauls as well as other types of engines-Assist in tearing down, repairing, replacing, and installing reduction gears-Working on Large Mechanical Systems and heavy equipment by staging equipment and material, bolting up equipment, installing equipment and...

  • OUTSIDE Machinist Diesel Mechanic

    2 days ago

    Norfolk, United States Aerotek Full time

    **Description:** Will be responsible for: -conducting diesel engine repairs, rebuilds, and overhauls as well as other types of engines -Assist in tearing down, repairing, replacing, and installing reduction gears -Working on Large Mechanical Systems and heavy equipment by staging equipment and material, bolting up equipment, installing equipment and...

  • Outside Machinist

    6 days ago

    Norfolk, United States Colonna's Shipyard Full time

    Outside Machinist - Helper Purpose:Colonna's Shipyard is seeking an Outside Machinist Helper to support operations in our Shipyard in Norfolk, VA. Job Description: Disassembles various types of equipment and machinery common to maritime vessels and/or general industry including but not limited to pumps, valves, winches, gear boxes. Assists in determining...

  • 1st Class Outside Machinist

    6 days ago

    Norfolk, United States Colonna's Shipyard Full time

    1 st Class Outside Machinist Purpose:Colonna's Shipyard, is seeking a 1st Class Outside Machinist to support operations in our Shipyard in Norfolk, VA. Job Description: Disassembles various types of equipment and machinery common to maritime vessels and/or general industry including but not limited to pumps, valves, winches, gear boxes. Assists in...

  • Outside Machinist

    5 days ago

    Norfolk, United States Shipyard Staffing LLC Part time $19 - $25

    Shipyard Staffing is currently hiring for Outside Machinist for work in Norfolk, VA.Job Description:This position is responsible for removing, installing, and testing main and auxiliary shipboard equipment including but not limited to: Main Reduction Gears (MRG), pumps, valves, hydraulic equipment, steam equipment, valves, propellers, bearings, etc. on...

  • Machinist Mate

    6 days ago

    Norfolk, United States Aerotek Full time

    Aerotek is hiring shipyard Outside Machinists for a contract-to-hire opportunity in Norfolk, VA. Prior Navy and applicable shipyard experience required for role. Hourly pay is based off specific experience. Ideal Skillsets: Machinist Mate Outside Machinist Diesel Mechanic Marine Mechanic Engineman Hydraulics Mechanic Gas Turbine Tech General Info: Job Title:...

  • Outside Machinist

    1 week ago

    Norfolk, United States Marine Hydraulics International, LLC Full time

    Job DescriptionJob DescriptionMHI Ship Repair & Services is a major marine repair and conversion contractor serving the U.S. Navy, Military Sealift Command, Maritime Administration and Commercial ship owners and operators worldwide. Our ship yard is conveniently located in the Mid-Atlantic region at the port of Hampton Roads, Norfolk Virginia.JOB SUMMARY:...

  • Outside Machinist

    2 months ago

    Norfolk, United States Marine Hydraulics International, LLC Full time

    Job DescriptionJob DescriptionMHI Ship Repair & Services is a major marine repair and conversion contractor serving the U.S. Navy, Military Sealift Command, Maritime Administration and Commercial ship owners and operators worldwide. Our ship yard is conveniently located in the Mid-Atlantic region at the port of Hampton Roads, Norfolk Virginia.JOB SUMMARY:...

  • Trades Helper I/II

    6 days ago

    Norfolk, United States Auxiliary Systems Inc Full time

    Job DetailsLevelEntryJob LocationNorfolk, VA, USA - Norfolk, VAPosition TypeFull TimeEducation LevelNoneSalary Range$17.50 - $30.00 HourlyTravel PercentageNegligibleJob ShiftDayJob CategoryShip RepairJob DescriptionPOSITION SUMMARYThis entry-level position provides a great opportunity to learn a highly sought-after trade skill. Trades Helpers I/II assist and...

  • Machinist Mate

    6 days ago

    Norfolk, United States Aerotek Full time

    Aerotek is hiring shipyard Outside Machinists for a contract-to-hire opportunity in Norfolk, VA. Prior Navy and applicable shipyard experience required for role. Hourly pay is based off specific experience.Ideal Skillsets:Machinist MateOutside MachinistDiesel MechanicMarine MechanicEnginemanHydraulics MechanicGas Turbine TechGeneral Info:Job Title: Outside...

  • Union (Outside) Machinist - Norfolk, VA 2024

    6 days ago

    Norfolk, United States Norfolk Southern Corp. Full time

    Requisition 37073: Union (Outside) Machinist - Norfolk, VA 2024 Job DescriptionInspect, service, repair and maintain diesel locomotives.Primary Responsibilities Perform daily and periodic inspections, servicing, and maintenance on diesel-electric locomotives, including but not limited to performing scheduled and preventative maintenance as determined by...

  • Union (Outside) Machinist - Norfolk, VA 2024

    7 days ago

    Norfolk, United States Norfolk Southern Full time

    Requisition 37073: Union (Outside) Machinist - Norfolk, VA 2024 Job DescriptionInspect, service, repair and maintain diesel locomotives.Primary Responsibilities Perform daily and periodic inspections, servicing, and maintenance on diesel-electric locomotives, including but not limited to performing scheduled and preventative maintenance as determined by...

  • 1st Class Inside Machinist

    5 days ago

    Norfolk, United States Colonna's Shipyard Full time

    1 st Class Inside MachinistPurpose:Steel America is seeking 1st Class Inside Machinists experienced in Manual Machining and/or CNC Mills & Lathes to support operations in the Inside Machine Shop in Norfolk, VA.Job Description: Examines blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished...

  • 1st Class Inside Machinist

    7 days ago

    Norfolk, United States Colonna's Shipyard, Inc. Full time

    1st Class Inside Machinist Purpose: Steel America is seeking 1st Class Inside Machinists experienced in Manual Machining and/or CNC Mills & Lathes to support operations in the Inside Machine Shop in Norfolk, VA. Job Description: * Examines blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of...