Aerospace Assembler
4 weeks ago
1st shift:6am-2:30pm
2nd shift: 2:30pm-10:00pm
Duration: Temp-to-hire
We are a is a leading global manufacturer of technology solutions including engineered systems, radio frequency (“RF”) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (“PCBs”).
Scope:
A Lamination Operator will perform all the duties related to Lay-up and Press, to include set up, start-up, shut-down, operation, quality checks, preventative maintenance and minor repairs. An operator will work with machines that move work from station to station. Will be exposed to hazardous waste while performing daily job duties. Operators will undergo Chemical Handling training prior to the start of performing these duties and will actively participate in ongoing hazardous waste and chemical handling training.
Duties and Responsibilities:
• Lay-up process steps
• Run press set-up, operation, shutdown, and emergency shutdown
• Read and interpret shop traveler to verify count and quality of previous process steps is met
• Read and interpret stack-up/construction and documented instructions or notes for special requirements
• Enter jobs and quality information in the Manufacturing Control System.
• Complete all internal departmental documentation accurately including travelers, daily preventative maintenance/Process Analysis Log(PAL),and heat rise press cycle charting
• Immediately communicate to your Supervisor, Manager or Process Engineer any discrepancies found in materials, product, or equipment
• Maintain a safe, neat and orderly workplace
• Follow all safety measures when handling chemicals and hazardous waste with regard to use, mixing and disposing chemicals
Essential Knowledge and Skills:
• Ability to read, write and communicate in English to the extent necessary to perform the job
• Able to lift 50 pounds without straining, and be able to stand throughout the shift
• Proficiency in computer skills
Education and Experience:
• High School Diploma or equivalent preferred
• Experience working in a manufacturing environment preferred
• Must have or be capable of obtaining and maintaining a U.S. Department of Defense (DoD) security clearance
-
Quality Inspector
4 weeks ago
San Antonio, United States Knight Aerospace Careers Full timeJob DescriptionJob DescriptionDescription:The Quality Inspector (Aerospace/manufacturing) will be primarily responsible for meticulously examining parts, assemblies, and finished products to verify they meet exact specifications and quality standards set by engineering drawings, blueprints, and industry regulations. This involves visual inspection for...
-
Contracted Assembly Technician
2 days ago
San Luis Obispo, United States Empirical Systems Aerospace Inc Full timeAssembly Technician (Temporary Assignment) Empirical Systems Aerospace, Inc. is seeking a Contracted Assembly Technician to join our team. Employment terms are in 3 month increments or until hired permanently. ESAero is a growing aerospace company in the San Luis Obispo area and provides various services which include but are not limited to: rapid system...
-
Assembly Technician
2 days ago
San Luis Obispo, United States Empirical Systems Aerospace, Inc. Full timeJob DescriptionJob DescriptionASSEMBLY TECHNICIAN Empirical Systems Aerospace, Inc. is seeking an Assembly Tech to join our team. ESAero is a growing aerospace company in the San Luis Obispo area and provides various services which include but are not limited to: rapid system development, on-demand niche engineering, hands-on development/testing, and...
-
Contracted Assembly Technician
2 days ago
San Luis Obispo, United States Empirical Systems Aerospace, Inc. Full timeJob DescriptionJob DescriptionAssembly Technician (Temporary Assignment)Empirical Systems Aerospace, Inc. is seeking a Contracted Assembly Technician to join our team. Employment terms are in 3 month increments or until hired permanently. ESAero is a growing aerospace company in the San Luis Obispo area and provides various services which include but are...
-
Program Manager 3
3 weeks ago
San Diego, United States Applied Composites Full timeApplied Composites (AC) is seeking a Program Manager 3 responsible for planning, organizing, and managing all activities necessary to ensure the successful completion of the assigned program within established objectives. Oversees program lifecycle and ensures results meet quality, reliability, scheduling, and cost projection requirements. Partners with all...
-
Mechanical Assembler
4 weeks ago
San Jose, United States Sanmina Corporation Full timeSanmina Corporation (Nasdaq: SANM) is a leading integrated manufacturing solutions provider serving the fastest-growing segments of the global Electronics Manufacturing Services (EMS) market. Recognized as a technology leader, Sanmina Corporation provides end-to-end manufacturing solutions, delivering superior quality and support to Original Equipment...
-
Aerospace Medical Service
2 days ago
San Antonio, United States Air Force Reserve Full timeENLISTED Aerospace Medical Service FILLING MULTIPLE MEDICAL ROLES 4N0X1 The hundreds of medical facilities we have around the world are only as good as the Airmen who work in them. Providing essential care in multiple medical roles, Aerospace Medical Service specialists assist doctors and care for patients in a wide range of situations. From...
-
Security Management I
1 day ago
San Antonio, United States Aegis Aerospace Inc Full timeOverview Aegis Aerospace is currently looking for a full time Security Manager I (Top Secret) to join our team in San Antonio, Texas at Lackland AFB. All candidates must hold an active Top Secret clearance for consideration . Did you know? Aegis Aerospace has more than 30 years of experience in creating innovative and practical solutions to fulfill defense...
-
Conventional Mill and Lathe Machinist
4 weeks ago
San Diego, United States Quality Controlled Manufacturing, Inc. Full timeJob DescriptionJob DescriptionQCMI currently has an immediate need for qualified Conventional Lathe and Mill Machinists for 1st and 2nd shifts. Qualified individuals must have a strong technical background along with the desire to succeed personally as well as professionally by expanding their ability and knowledge at QCMI.Requirements:Must have previous...
-
Integration Assembly Technician
1 month ago
San Leandro, United States Vantage Robotics Full timeJob DescriptionJob DescriptionVantage Robotics Is looking for motivated, energetic, and enthusiastic mechanical / electrical technicians to assist with manufacturing, assembling and testing drones & ground controller units. Assembly technicians and R&D engineering team are tight knit and we regularly accomplish feats that were previously thought impossible...
-
Integration Assembly Technician
7 days ago
San Leandro, United States Vantage Robotics Full timeVantage Robotics Is looking for motivated, energetic, and enthusiastic mechanical / electrical technicians to assist with manufacturing, assembling and testing drones & ground controller units. Assembly technicians and R&D engineering team are tight knit and we regularly accomplish feats that were previously thought impossible or improbable. Ideal candidate...
-
Manufacturing Engineer
1 day ago
San Diego, United States EVONA Full timeI'm looking to speak to a skilled Manufacturing Engineer/ Process Engineer who is specializing in electronics manufacturing. Someone who specifically focuses on the production and assembly of electronic components and devices. You will need to have a background in industries such as electronics manufacturing, aerospace, medical devices, automotive, or any...
-
CNC Lathe and Mill Machinist
4 weeks ago
San Diego, United States Quality Controlled Manufacturing, Inc. Full timeJob DescriptionJob DescriptionQCMI currently has an immediate need for qualified CNC Lathe and Mill nMachinists for 1st and 2nd shifts. Qualified individuals must have a strong technical background along with the desire to succeed personally as well as professionally by expanding their ability and knowledge at QCMI.Requirements:Must have previous experience...
-
Manufacturing Engineer
3 days ago
San Diego, United States EVONA Full timeI'm looking to speak to a skilled Manufacturing Engineer/ Process Engineer who is specializing in electronics manufacturing. Someone who specifically focuses on the production and assembly of electronic components and devices. You will need to have a background in industries such as electronics manufacturing, aerospace, medical devices, automotive, or any...
-
Manufacturing Engineer
3 days ago
San Diego, United States EVONA Full timeI'm looking to speak to a skilled Manufacturing Engineer/ Process Engineer who is specializing in electronics manufacturing. Someone who specifically focuses on the production and assembly of electronic components and devices. You will need to have a background in industries such as electronics manufacturing, aerospace, medical devices, automotive, or any...
-
Manufacturing Engineering, Assembly
3 weeks ago
San Antonio, United States PDS Defense, Inc. Full timePDS Defense, Inc is seeking a Manufacturing Engineer 3 in San Antonio, TX. Job Responsibilities: Develops and implements production and tooling methodologies Participates on Integrated Product Teams (IPTs) to integrate technical solutions across multiple disciplines Develops, identifies and implements conceptual designs and maintains the program architecture...
-
CNC Machinist
2 days ago
San Luis Obispo, United States Empirical Systems Aerospace, Inc. Full timeJob DescriptionJob DescriptionCNC MACHINISTEmpirical Systems Aerospace, Inc. is seeking a CNC Machinist to work along side our CNC Programmer. ESAero is a growing aerospace company in the San Luis Obispo area and provides various services which include but are not limited to: rapid system development, on-demand niche engineering, hands-on...
-
Mechanical Engineer
2 days ago
San Luis Obispo, United States Empirical Systems Aerospace Inc Full timeMechanical Engineer Job DescriptionLocation: San Luis Obispo, CAUS Citizenship Required for this Position: YesRelocation Available: NoCompany Overview:Empirical Systems Aerospace, Inc. (ESAero) is a growing aerospace company in the San Luis Obispo area that provides various services which include but are not limited to: rapid system development, on-demand...
-
Tooling Design Engineer
4 weeks ago
San Diego, United States Natilus Inc. Full timeNatilus is seeking a Tooling Design Engineer to join the manufacturing team in San Diego, CA. Your primary task would be designing and overseeing the fabrication of assembly tooling components and jigs. At Natilus, we work with a small team of highly adaptable engineers which enables us to accomplish the tasks of a much larger team. This gives you the...
-
Mechanical Assembler
4 weeks ago
San Jose, United States Sanmina Corporation Full timeSanmina Corporation (Nasdaq: SANM) is a leading integrated manufacturing solutions provider serving the fastest-growing segments of the global Electronics Manufacturing Services (EMS) market. Recognized as a technology leader, Sanmina Corporation provides end-to-end manufacturing solutions, delivering superior quality and support to Original Equipment...