Supplier Quality Engineer
2 weeks ago
The Supplier Quality Engineer position involves functioning as technical liaison between purchasing, engineering, manufacturing, operations and suppliers. Resolves technical & quality issues, implements and monitors advanced quality planning process, and provides technical support for manufacturing process validation and assure accomplishment of the product with the engineering specifications and quality requirements. Applies diversified knowledge of quality engineering principles and practices to produce and or coordinate the solutions to complex problems. Supplier Quality Management. Considerable creativity and initiative is required. Independent judgment is normally required with some direction from the supervisor.
PRIMARY DUTIES AND RESPONSIBILITIES
- Participate in the sourcing process, selection and evaluation of new potential suppliers as a support function to purchasing to have an approved supplier base
Involved with new business allocation and supplier feasibility analysis
Pre-fill out the feasibility analysis format describing the special characteristics and future quality requirements, including the early production containment
Implement and monitor advanced quality planning process with selected suppliers for new business, be responsible for supplier APQP progress and process until final PPAP approval by engineering within time frame and according to requirement by engineering in coordination with purchasing
Assure supplier’s understanding of product and submission requirements
Review supplier’s manufacturing processes and quality systems
Assure the accomplishment of the product with the drawing tolerances, engineering specifications & quality requirements with selected suppliers
Function as liaison between purchasing, engineering, manufacturing, operations and suppliers to resolve supplier quality & technical issues and to provide technical support
Define the metrics, goals and periodic monitoring of supplier performance, improve quality performance of suppliers by conducting workshops at supplier locations, providing technical assistance in developing a quality system, or other technical support as required
Maintain required documentation and files
Identify part critical characteristics from product design and/or learned lessons and deploy to the supplier the required process controls
Review manufacturing fixtures concept to assure alignment to the GD&T part design
Cost recovery activities by DMR with suppliers
Support incoming material department
Application of Controlled Shipping (CS-I and CS-II) procedures as required
Coordinate quality product audits in incoming inspection to assure accomplishment to the requirements and issue a DMR to the supplier if it applies
Determine cause of supplier quality problems and coordinate/implement effective and timely resolutions through G8D’s problem solving
Accomplishment of the organization quality system requirements management with supply base
EDUCATION AND QUALIFICATIONS
- Experience in manufacturing, quality, and/or engineering (min 5 years)
- Bachelor’s Degree in Engineering (Mechanical or Mechatronic is desirable)
- REQUIRED: Minimum 3 years of high-pressure aluminum die casting experience
SKILLS AND COMPETENCIES
Hands on experience in manufacturing (with thorough knowledge of manufacturing and assembly plant processes, procedures, facilities and equipment
Knowledge of automotive industry standards and launch procedures (as example; AIAG Core tools [APQP, PPAP, MSA, PFMEA, SPC], TS16949 (Now IATF 16949)
Highly proficient in print reading and interpretation, part measurement/GD&T
Demonstrated thorough knowledge of probability, statistical quality control and techniques (for example DOE, SPC, 7 Quality tools, etc.)
Demonstrated expertise in investigating complex quality problems and applying sound technical problem solving skills (as example; 8D’s, root cause analysis [DD&W, 5Why’s, Fishbone, etc.], etc.)
Overall flexibility due to frequent plan changes driven by unforeseen current quality issue
Experience in with casting (as example; gravity, permanent mold, die cast, investment casting, etc.), forging, machining (turning, milling, spline rolling, drilling, shaping, shaving, boring, honing, grinding, etc.) electric & electronic products, PM process, heat treatment process (as example; carburizing, nitrating, normalizing, isothermal annealing, quench and temper, etc.)
Experience with other transmission components and manufacturing processes
TRAVEL REQUIREMENTS
25-40% travel and ability to periodically work non-traditional business hours to support local and international suppliers
Note: Functional responsibilities subject to change through time.
Company DescriptionFrom high performance supercars and sports cars to rugged-duty agricultural, vocational and line haul vehicles, TREMEC is a well-respected brand for world-class transmission assemblies and components.TREMEC torque transfer solutions include manual rear-wheel drive transmissions, dual clutch transmissions, hybrid & EV drivetrain solutions, gears, shafts, and mechatronic systems with integrated clutch systems and control software.
TREMEC's products solve key challenges faced by the powertrain industry, including mandates for increased fuel efficiency, reduced emissions, lower weight, and compact size. Its technology addresses the industry's stringent requirements for reliability, cost, and quality - while providing fun-to-drive characteristics.Company DescriptionFrom high performance supercars and sports cars to rugged-duty agricultural, vocational and line haul vehicles, TREMEC is a well-respected brand for world-class transmission assemblies and components.\r
\r
TREMEC torque transfer solutions include manual rear-wheel drive transmissions, dual clutch transmissions, hybrid & EV drivetrain solutions, gears, shafts, and mechatronic systems with integrated clutch systems and control software.\r
\r
TREMEC's products solve key challenges faced by the powertrain industry, including mandates for increased fuel efficiency, reduced emissions, lower weight, and compact size. Its technology addresses the industry's stringent requirements for reliability, cost, and quality - while providing fun-to-drive characteristics.
-
Supplier Quality Engineer
2 weeks ago
Novi, United States TREMEC Full timeThe Supplier Quality Engineer position involves functioning as technical liaison between purchasing, engineering, manufacturing, operations and suppliers. Resolves technical & quality issues, implements and monitors advanced quality planning process, and provides technical support for manufacturing process validation and assure accomplishment of the product...
-
Supplier Quality Engineer
1 week ago
Novi, United States TREMEC Full timeThe Supplier Quality Engineer position involves functioning as technical liaison between purchasing, engineering, manufacturing, operations and suppliers. Resolves technical & quality issues, implements and monitors advanced quality planning process, and provides technical support for manufacturing process validation and assure accomplishment of the product...
-
Supplier Quality Engineer
2 weeks ago
Novi, United States TREMEC Full timeThe Supplier Quality Engineer position involves functioning as technical liaison between purchasing, engineering, manufacturing, operations and suppliers. Resolves technical & quality issues, implements and monitors advanced quality planning process, and provides technical support for manufacturing process validation and assure accomplishment of the product...
-
Supplier Quality Engineer
2 weeks ago
Novi, United States TREMEC Full timeOBJECTIVE OF THE POSITION: The Supplier Quality Engineer position involves functioning as technical liaison between purchasing, engineering, manufacturing, operations and suppliers. Resolves technical & quality issues, implements and monitors advanced quality planning process, and provides technical support for manufacturing process validation and assure...
-
Supplier Quality Engineer
2 weeks ago
Novi, United States TREMEC Full timeThe Supplier Quality Engineer position involves functioning as technical liaison between purchasing, engineering, manufacturing, operations and suppliers. Resolves technical & quality issues, implements and monitors advanced quality planning process, and provides technical support for manufacturing process validation and assure accomplishment of the product...
-
Supplier Quality Engineer
2 weeks ago
Novi, United States TREMEC Full timeOBJECTIVE OF THE POSITION: The Supplier Quality Engineer position involves functioning as technical liaison between purchasing, engineering, manufacturing, operations and suppliers. Resolves technical & quality issues, implements and monitors advanced quality planning process, and provides technical support for manufacturing process validation and assure...
-
Supplier Quality Engineer
2 weeks ago
Novi, United States TREMEC Full timeOBJECTIVE OF THE POSITION: The Supplier Quality Engineer position involves functioning as technical liaison between purchasing, engineering, manufacturing, operations and suppliers. Resolves technical & quality issues, implements and monitors advanced quality planning process, and provides technical support for manufacturing process validation and assure...
-
Supplier Development Engineer
1 day ago
Novi, United States StaffBright Full timeStaffBright has a great Supplier Development Engineer opportunity available near the Novi, MI area with a Tier-1 automotive supplier!Key ResponsibilitiesPartner with the clients global divisions to identify, develop, launch, and maintain supply base that aligns with global sourcing strategyLead new program launches with supply base ensuring alignment with...
-
Quality Engineer
2 weeks ago
Novi, United States Acro Full timeJob Title: Quality Assurance Engineer Find out more about this role by reading the information below, then apply to be considered. Location: 46890 Magellan Drive Novi, MI 48377 Pay Rate: $38/Hour Duration: 03 months Note: Please send your updated resume if you want to get submitted. Position Summary: - Job Functions include but are not limited to: ...
-
Quality Engineer
3 weeks ago
Novi, United States Acro Full timeJob Title: Quality Assurance Engineer Location: 46890 Magellan Drive Novi, MI 48377 Pay Rate: $38/Hour Duration: 03 months Note: Please send your updated resume if you want to get submitted. Position Summary: - Job Functions include but are not limited to: Evaluate proposed part physical and functional criteria used to evaluate pre-production parts...
-
Quality Engineer
3 weeks ago
Novi, United States Acro Service Corp Full timeJob Title: Quality Assurance EngineerLocation: 46890 Magellan Drive Novi, MI 48377Pay Rate: $38/Hour Duration: 03 monthsNote: Please send your updated resume if you want to get submitted. Position Summary: - Job Functions include but are not limited to:Evaluate proposed part physical and functional criteria used to evaluate pre-production parts documented...
-
Quality Engineer
3 weeks ago
Novi, United States Acro Service Corp Full timeJob Title: Quality Assurance EngineerLocation: 46890 Magellan Drive Novi, MI 48377Pay Rate: $38/Hour Duration: 03 monthsNote: Please send your updated resume if you want to get submitted. Position Summary: - Job Functions include but are not limited to:Evaluate proposed part physical and functional criteria used to evaluate pre-production parts documented...
-
Quality Assurance Engineer
3 weeks ago
Novi, United States Abacus Full timeEngagement Type: Contract Short Description: Location: 46890 Magellan Drive Novi, MI 48377 ** 90 Day Assignment ** Complete Description: We are currently looking for a Prototype Engineering Quality Assurance Engineer (Level 2) to join our team in Novi, Michigan. The PTE QA Engineer will be responsible for the quality of all prototype parts received by...
-
Quality Engineer
4 weeks ago
Novi, United States TREMEC Full timeOBJECTIVE OF THE POSITION: The Quality Engineer interprets the product design requirements and specifications, and works with the Manufacturing Engineer and the cross-functional team to industrialize the manufacturing and assembly process to make the product. This position requires a deep understanding of Quality principles to implement APQP, PPAP and Single...
-
Quality Engineer
4 weeks ago
Novi, United States TREMEC Full timeOBJECTIVE OF THE POSITION: The Quality Engineer interprets the product design requirements and specifications, and works with the Manufacturing Engineer and the cross-functional team to industrialize the manufacturing and assembly process to make the product. This position requires a deep understanding of Quality principles to implement APQP, PPAP and Single...
-
Quality Engineer
3 weeks ago
Novi, United States TREMEC Full timeOBJECTIVE OF THE POSITION: The Quality Engineer interprets the product design requirements and specifications, and works with the Manufacturing Engineer and the cross-functional team to industrialize the manufacturing and assembly process to make the product. This position requires a deep understanding of Quality principles to implement APQP, PPAP and Single...
-
Quality Engineer
4 weeks ago
Novi, United States TREMEC Full timeOBJECTIVE OF THE POSITION: The Quality Engineer interprets the product design requirements and specifications, and works with the Manufacturing Engineer and the cross-functional team to industrialize the manufacturing and assembly process to make the product. This position requires a deep understanding of Quality principles to implement APQP, PPAP and Single...
-
Quality Engineer
2 days ago
Novi, United States TREMEC Full timeOBJECTIVE OF THE POSITION: The Quality Engineer interprets the product design requirements and specifications, and works with the Manufacturing Engineer and the cross-functional team to industrialize the manufacturing and assembly process to make the product. This position requires a deep understanding of Quality principles to implement APQP, PPAP and Single...
-
Vehicle Quality Engineer
3 weeks ago
Novi, United States Tata Consultancy Services Full timeExperience Required•5+ years of experience in a Manufacturing/Engineering/Operations Quality role in the automotive/transportation OEM or Tier supplier manufacturing arena.•Ability to work independently, identifying and addressing problems with appropriate priority.•Experience with a variety of light assembly and manufacturing processes.•Understands...
-
Customer Quality Engineer
2 weeks ago
Novi, United States Jatca Full timePlans and directs activities concerned with development, application and maintenance of quality standards for industrial process, materials and products for customer program(s) assigned Assumes lead for all Quality Assurance functions for assigned Pr Quality Engineer, Quality, Controls Engineer, Customer, Service Engineer, Technology, Staffing